TOPCON BT/SD Board User’s Manual Ver1.
FCC Notices FCC ID: H5P-FC200BTSD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
(1) Product Overview The BT/SD Board is designed to provide wireless communication ability for the TOPCON’s “FC” Field Controller families to communicate with other Bluetooth devices via the class 2 of the Bluetooth V1.2 protocol. This device is equipped with some type of “FC” Field Controllers before shipping. (2) Features Bluetooth Features Compact wireless data communication module designed for Makitra’s battery-operated tools Low power CSR BlueCore2-Ext Chipset (Bluetooth V1.2) Tx output: 0.
(3) Operation To Equip the BT/SD Board with “FC” Field Controller This device is already equipped by TOPCON before shipping. The example of an equipped Field Controller “FC-200” is shown below. Setting up BT/SD Board The FC-200 has Bluetooth transmission function using a built-in BT/SD Board. Information can be exchanged between instruments equipped with the same function using Bluetooth wireless technology. The BT/SD Board is running on the operation system of FC-200, Windows Mobile 5.
Follow the procedure below to turn on the Bluetooth function. (1) Tap Start > Settings > Connections tab. (2) On the [Wireless Manager] display, tap on the [Bluetooth] icon. (3) Select or clear the Turn on and off Bluetooth check box (4) When the Bluetooth function is turned ON, the wireless LED will flash in green color. Create a Bluetooth partnership Ensure that the two devices are turned on, discoverable, and within close range. (1) Tap Start > Settings > Connections tab.
(4) Hints & Tips (1) The BT/SD Board may not work well where Microwave ovens and /or other 2.4GHz ISM devices like wireless LAN are working. Keep RF unit and wireless data receiver away from these devices. (2) If you no longer want your device to be discoverable, clear the Make this device discoverable to other devices check box.
TOPCON CORPORATION 75-1 Hasunuma-Cho, Itabashi-Ku, Tokyo 174-8580 Japan Phone: 3-3558-2577, FAX: 3-3966-0038, URL: www.topcon.co.
