User's Manual

ManualsBrandsTopcon America ManualsElectronicsGNSS RECEIVER SYSTEM

DRAFT

Appendix B

P/N 7010-0752

Specifications

This TPS product is a 50-channel GPS receiver integrated with an internal computer and Windows

Mobile6.0 operating system with touch screen, a digital camera, a Bluetooth® wireless technology

module, celler module(option),an electronic compass, and an SD card slot. The portable design and

product integration allows this device to be a fully-functional, productive tool at any job.

Performance specifications assume a minimum of 6

GPS satellites above 15 degrees in elevation and

adherence to the procedures recommended in this

manual.

In areas of high multipath, during periods of large

PDOP, and during periods of increased ionospheric

activity, performance may degrade.

Use robust checking procedures in areas of extreme

multipath or under dense foliage.

Summary of content (7 pages)

PAGE 1
DRAFT Appendix B Specifications This TPS product is a 50-channel GPS receiver integrated with an internal computer and Windows Mobile6.0 operating system with touch screen, a digital camera, a Bluetooth® wireless technology module, celler module(option),an electronic compass, and an SD card slot. The portable design and product integration allows this device to be a fully-functional, productive tool at any job.
PAGE 2
Specifications GRS Specifications The following sections provide specifications for the GRS and its internal components. General Details GRS General Specifications table lists the receiver’s general specifications. Table B-1. GRS General Specifications Physical Enclosure ABS Color Topcon Yellow and Topcon Grey Dimensions D: 213 x W: 93 x H: 46mm Weight 0.77 kg Antenna Internal Battery Internal, rechargeable/replaceable Backup, replaceable Controller Integrated; uses Windows Mobile 6.
PAGE 3
Operating time (Back light OFF, L1 GPS mode) No less than 3.5 hours with GPS and cell phone use. No less than 5 hours with GPS use. No less than 8 hours without GPS and cell phone. Supply from Holder (without Radio modem operates) No less than 10 hours with GPS and cell phone use. External power 1 port Contact Pin: From the battery Holder. Input voltage 12 V DC (for charge battery) Consumption 5.
PAGE 4
Specifications Communication Serial port Port A of GPS+ board Baud rate = 460800, 230400, 115200, 2400, 1200, 600, 300 Flow control = RTC/CTS Length= 7, 8 (default) Stop bit= 1 (default, 2 Parity= None (default), Odd, Even Bluetooth Version: Bluetooth standard 1.2; Class 2; Profile: SPP, DUP Multiple connection capability (4 ports) Wireless LAN 802.11b/g USB Version 1.1 Windows Mobile6.0 Processor Intel PXA320 Processor speed 806MHz Operating System Microsoft Windows Mobile 6.
PAGE 5
Speaker Mono Microphone Mono Memory Internal memory ＤＤＲ２ External memory Via SD card slot SDRAM 256MB GPS Details GPS Board Specifications lists the GPS board’s general specifications. Table B-2.
PAGE 6
Specifications Other (GPS) Real time data format RTCM 2.3, 3.0; CMR, CMR+; TPS NMEA NMEA 2.2, 2.3, 3.0 Output rate Up to 10Hz Connector Specifications The GRS has one antenna connector for radio transmission/reception and three port connectors for power and data upload/download. Serial Connector The serial connector (Serial RS23) is a sealed receptacle, 5 pin, port. This connector is configured as port A of the internal GPS receiver. Figure B-1.
PAGE 7
USB Connector Rimmed in yellow, the USB connector is a sealed receptacle, 4 pin TPS cable connector (USB Connector ). Figure B-2. USB Connector for GGD Options USB Specifications gives the USB connector specifications. Table B-4.