CL10 User Manual Part Number: 1033349-01 Rev Number: A © Copyright Topcon Precision Agriculture All contents in this manual are copyrighted by Topcon. All rights reserved. The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published or distributed, or otherwise reproduced without express written consent from Topcon.
Foreword The CL10 adds cellular and Wi-Fi capability to the X-Family consoles. It allows access to the new Topcon Agriculture Platform (TAP), which is a cloud based integrated agronomic management platform. It also provides access to the XTEND feature in the Horizon console operating system. General Information Description The CLOUDLYNK 10 is proposed as a USB-powered plug and play box hosted by a remote, LINUX based, processor. It will provide 3G/LTE global, WiFi 802/11 b,g,n and BLE 4.
Figure 1 Figure 2 10333349-01 Rev A 3
Figure 3 Cover characteristics Back housing / aluminum carrier • Aluminum die cast • Supporting the venting membrane and the label field • Powder coating with structure, semi gloss, RAL 9006 Figure 4 10333349-01 Rev A 4
Plastic Front Cover • Plastic molded part, visible surfaces etched & polished, no painting • 3 overmolded or assembled LED windows • Supporting the mainboard with 2 sealed Amphenol USB-Type A slots with related rubber plugs • Supporting the internal antennas (self sticking) • Supporting the external WiFi-Antenna • Supporting the M8-USB Main connector • Plastic material color 9005, black Figure 5 Mass The CLOUDLYNK 10 total mass is 0,15 kg max including the USB connection cable/plug and the USB
The length of the harness connection cable is 350 mm including the plug. The 2 USB ports rubber protection caps are considered pugged. Technical Specifications Thermal characteristics Operating temperature The CLOUDLYNK 10 will be able to operate in accordance with the specification while exposed to a still air environment at a temperature range of -25 °C < Top < +65 °C.
Vibration and shock The CLOUDLYNK 10, properly mounted and connected, will be able to operate in accordance with the specification while exposed to a 10 – 300 Hz 50 m/s2 24 hours 1 octave/min along each geometrical axis. Special care must be taken to protect the connection cable and the USB plug from vibration field. The CLOUDLYNK 10 will survive the application of 3 impulses 300 m/s2 11mS along each geometrical axis.
OP Mode Mode Characteristics LARA-R2 Local coverage: EU, US, AUS,JAP Modem (LTE Cat 1 Version) Approvals: CE RED GCF PTCRB IC AT&T Current Consumption LTE (FDD) 3GPP Rel.9 Compliant Protocol Stack, RX-Diversity Bands Quad-Band LTE: Bands 2, 4, 5, 12 (700, 850, 1700/2100 (AWS) and 1900 MHz) Tri-Band UMTS: Bands 5, 4, 2 (WCDMA/FDD 850, 1700/2100 (AWS) and 1900 MHz) Data speed LTE Cat.1 DL: max. 10.2 Mbps, UL: max. 5.2 Mbps HSPA+ Cat.8 (ELS61-US) data rates DL: max. 7.2 Mbps, UL: max. 5.
OP Mode Mode Characteristics Current Consumption DES, 3DES (ECB, CBC), AES up to 256 bits RSA keys up to 2048 bits Elliptic curves support from 224 bits to 384 bits Secure element SE V1.3.1 Data security H/W SHA-1, SHA-256, SHA-384 bits (Gemalto-Cinterion) Asimmetric RSA according to ISO 9796-2 or PKCS#1 v2.
TABLE 2 - Processor block diagram Supply voltage The CLOUDLYNK 10, properly connected, will be able to operate in accordance with the specification when the supply voltage will be in the range of 4,5 – 5,5 Vdc. The nominal supply voltage will be 5,0 Vdc (USB standard) Being all USB connectors intrinsically polarized, the power lines are not protected against the polarity inversion. Installation – setup CL10 installation With mounting arm for RAM 1. Remove the nuts from the RAM mount. 2.
User interface LED status The LEDs on the CL10 are currently not used. Product Warranty ELECTRONIC COMPONENTS -TPA warrants that the electronic components manufactured by TPA shall be free of defects in materials and workmanship for a period of two years from the original date of shipment to the dealer.
Use restrictions and warnings (FCC / ISED) Commentato [MDA1]: Inserire tutto il capitolo 1.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.
6. Responsible party’s contact located in the Canada: STEPHEN ROSENEGGER 106-7326-10th Street N.E., Calgary, AB T2E8W1 Canada Phone no: +1.403.450.4262 Email address: srosenegger@topcon.com 7. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
