CMS100 Card Reader User Guide
Table Of Contents 1. Introduction................................................................. 1 1-1. Overview................................................................................. 1 1-2. Features................................................................................... 1 2. Specification................................................................ 2 2-1. General.................................................................................... 2 2-2. Electrical........
CMS100 1. Introduction 1-1. Overview The CMS System can help reduce up to 70% of labour cost, all customers yound and old can easily operate the unit. This unit will also help with the daily audits and prevent miscalculations on all balances. Easy to install and use; no extra wires or connections between devices, keeping a clean and easy workspace. 1-2. Features 1. High security 2. two signal modes compatible with a large variety of gaming consoles 3.
CARD READER 2. Specification 2-1. General Interface RS232/PULSE Installation Indoor Card Type Compliant with ISO 7816 contact smart card Power Source Power Consumption Temperature Range Weight Outline Dimension 2-3. Electrical 12V DC Standby: 1.2~1.3 W Operration Current: 2.1 W Maximum: 2.3 W Operating Temperature: 0° C~60° C Storage Temperature: -10° ~80° C Humidity: 20~70% RH (no condensation) 2-4. Machine 310±10g 142 x 91 x 44 mm Display 71 x 39 mm 3.
CMS100 4. Dimension Unit:mm [inch] • CMS100 Dimension 4.9 0.19 90.3 3.55 137.3 5.40 35 1.38 9.3 0.37 52 2.05 142.1 5.60 10.6 0.42 101.5 4.00 116 4.57 3 www.topvme.com 43.8 1.
CARD READER • Mounting bracket Dimension 134.4 5.29 4.2 0.17 152 5.98 136.1 5.36 1.2 0.05 105.1 4.14 4.2 0.17 77.8 3.06 4 www.topvme.
CMS100 5. Installation Notes 5-1. Desktop installation Installation method: 1. Paste the stenal to the location you want to install. 2. Drill holes according to the marked positions. 3. Place the carriage screws (b) in the CMS100. 4. Connect the wire the CMS100. 5. Place the screw(b) into the drilling position and lock the unit into palce from underneath with the provided nuts(c). (b)x2 Push (c)x2 5 www.topvme.
CARD READER 5-2. Metal bracket installation Installation method: 1. Lock the self-tapping screws (a) into the bracket and secure the CMS100, do not loosen the screws. (top left) 2. Place the carriage screw (b) into the CMS100 and look down with the nut (c) so that it is not loose. (top right) 3. Drill holes in the desired position according to the stenal. 4. Connect the required wire. 5. Use screws (b)to secure the metal bracket to the machine and lock with nuts (c) .
CMS100 6. Harness Application Interface Voltage 12VDC Usage Harness NO. Page Power & Data Communication 2WIR-CMS1000A-00 9 Power & Data Communication position J2 CN1 CN5 JP2 Wiring instructions JP1 : JP5 CN1: Main board upgrade F/W connector. CN5: Second board upgrade F/W connector. JP1(KEY IN) = L :NO , R :NC JP2(TICKET) = L :NO , R :NC JP5(Reserved) = L :NO ,R :NC 7 www.topvme.
CARD READER 2WIR-CMS1000A-00 PIN NO COLOR PIN DEFINE PIN1 BLACK GND PIN2 BROWN NOTE PIN3 GREEN PAY+ PIN4 ORANGE TICKET PIN5 YELLOW HOP_N PIN6 RED +12V DC PIN7 BLUE PAY- 8 www.topvme.
CMS100 Key In Signal 2 5V - 12V DC 4K7 1 VCC 2 NOTE 1 NO MCU 1 2 JP1 SWITCH NC CMS100 CUSTOMER Key Out Signal 2 5V - 12V DC 4K7 1 VCC 2 TICKET 1 NO MCU 1 2 JP2 SWITCH NC CMS100 CUSTOMER 9 www.topvme.
CARD READER Key Out SYNC Signal 2 VCC 3 1 4 2 1 MCU HOP_N HI →TR ON LO→TR OFF TR CMS100 CUSTOMER Key Out Notify Signal 5V - 12V DC 2 1 VCC MCU U2 2 2 1 4K7 1 6 4 CMS100 CUSTOMER 10 www.topvme.
CMS100 7. Operation Instruction (E) (F) (A) (B) (C) 7-1. Setting and display components (A)Yellow button: Key out, Down (B)Blue button: Bet ok (C)Green button: Key in, UP (D)Red button: Call manager (E)Display screen (F)Card location 11 www.topvme.
CARD READER 7-2. Functional mode 7-2-1. General mode: Normally boot into normal mode. 7-2-2. Channel setting : Press the yellow button and reboot to enter this mode, the RF communication has 31 channel to choose from. After entering the mode, use the yellow and green buttons to select the channel, and the blue button to confirm . 7-2-3. Information: Press the blue button and reboot to enter this mode to access the device number and program version number. 7-2-4.
CMS100 8. Software download Please refer to the G-BOX instruction manual for the download manual. You can obtain it from your local agent or contact us at the service@topvme. com.tw. Main board Second board Top Vending Machine electronics Co.,Ltd. G-BOX PROGRAMMER Operation Manual www. t opvme. c om G-BOX Maunal 9.
CARD READER Operational Description 1. CMS100 power on . 2. General mode: Normally boot into normal mode . Tx Standby 3. Channel setting : Press the yellow button and reboot to enter this mode, the RF communication has 31 channel to choose from. After entering the mode, use the yellow and green buttons to select the channel, and the blue button to confirm . 4. Information: Press the blue button and reboot to enter this mode to access the device unique code and program version number . 5.
FCC Notices 15.21: The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 15.
Taiwan Top Vending Machine Electronics Co., Ltd. NO.11, Anzhong St., Luzhu Dist., Taoyuan City338, Taiwan, (R.O.C.) Phone : +886-3-3115969.Fax : +886-3-3115970 E-mail : sales@topvme.com.tw Website : www.topvme.com NO.
Top Vending Machine Electronics Co., Ltd.