User Manual (English)
Read and follow these instructions when connecting and using your display: Operation: • Keep the Jamboard out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • When positioning the display, make sure the power plug and outlet are easily accessible.
Maintenance: • To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do not lift the display by placing your hand or fingers on the LCD panel. • Unplug the display if you are not going to use it for an extensive period of time. • The screen may be wiped with a dry cloth. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
! Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. For doors or covers intended to be removed by operator for installation of accessory devices, instructions shall be provided for the correct removal and reinstallation of the door • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off.
RF Warning: Federal Communication Commission Interference Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
End-of-Life Disposal Table Of Contents Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. 1. Please find out about the local regulations on how to dispose of your old display from your local dealer. (For customers in Canada and U.S.A .) This product may contain lead and/or mercury.
1. Unpacking 1.1 Unpacking • • • • This product is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. Due to the size and weight of this display it is recommended for two people to move it. After opening the carton, ensure that the contents are complete and in good condition. 1.
2. Functions 1 POWER BUTTON Switch the main power on/off. 7 HDMI 2.0 HDMI video/audio input. 2 VOLUME [ +/-] Control volume output. 8 AC IN AC power input from the wall outlet. 3 INPUT Use this button to select the input source. 9 USB Type C Support power delivery/ USB storage/ DP input. 4 MICRO USB Update Android flash only. 10 USB 3.0 Port 1 / USB 3.0 Port 2 Connect your USB storage device. 5 SPDIF OUT SPDIF 2.1 channel Output. 11 HDMI 1.4 HDMI video/audio input.
3. b.Front Control Panel 1 3.1 2 NFC logo Operation OSD Keypads 3.2 OSD functions Power Key: DC off/on controller. Power off/on: Press “Power” to switch the power state. Source Key: Source selection. Source selection: Press “Source” to switch to next source. The source selection sequence is HDMI1 > HDMI2 > DP > Android. Vol+ Key: Up adjuster. Brightness: Press “Vol-” to pop out the “Brightness adjuster” menu. And then use “Vol+” and “Vol-“ to adjust it. Vol- Key: Down adjuster.
3.3 Touch Operation This display is equipped with a touch-sensitive screen and supports the Jamboard features either by singletouch or multitouch operation. You can touch the pictures or words on the display gently with your fingers, and your Jamboard will react. The following description illustrate some typical touch operation behavior. For further detail on how to run the touch operation, please refer to the on screen instruction.
3.4 4. Stylus and Eraser Operation This Jamboard display is equipped with a touch-sensitive screen and supports the use of the JAM stylus or eraser. You can touch the pictures or words on the display gently with your accessories, and your JAM Board will react. The following description illustrate some typical touch operation behavior. For further detail on how to run the touch operation, please refer to the on screen instruction. Write Erase Use the stylus to write anywhere on the screen.
4.2 Types of Pixel Defects + Dot Definition 4.3 Dark Dot Defects Pixel and sub-pixel defects appear on the screen in different ways. There are three categories of pixel defects and several types of sub-pixel defects within each category. Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: Dot definition = What is a defective “Dot”? One or more defective, adjacent sub-pixel are defined as one “dot”. The no.
4.5 Pixel Defect Tolerances HOW TO SPOT MURA In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table There are many symptoms of Mura and also multiple causes. Several of these are listed below: BRIGHT DOT EFFECT ACCEPTABLE LEVEL 1 lit sub pivel 2 BLACK DOT EFFECT 4.
5. Cleaning and Troubleshooting • • 5.1 Cleaning 5.2 Troubleshooting Caution when using the display • • • Do not scratch or hit the surface of the panel with fingers or hard objects of any kind. Do not use volatile substances such as insert sprays, solvents and thinners. Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.
6. Technical Specifications In/Out Terminals Display Item Specifications SPDIF Output SPDIF Port Serial digital audio output when input is HDMI RJ-45 RJ-45 Jack x 1 (8 Pin) 1000BaseT HDMI Input HDMI Jack x 2 (Type A) (19 Pin) Digital RGB:TMDS (Video + Audio) Item Specifications Screen Size (Active Area) 54.64” (138.8 cm) LED Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.315 mm x 0.315 mm USB Input USB x 2 (Type A) USB 3.0 Color Depth 10 bits, 1.
Environmental Condition: General: Item Specifications Item Power Supply AC 100 - 240V, 50 - 60Hz Temperature Power Consumption 200 W (Max.) Humidity 130 W (Typ.) NA (EPA 6.1) <0.5W (standby mode) Dimensions 1352(W) x 1817.4(H) x 1019.5(D) mm (Floor standing) Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% (without condensation) Storage 5 ~ 95% (without condensation) Operational 0 ~ 3,000 m Storage / Shipment 0 ~ 9,000 m 1352(W) x 978.7(H) x 211.