User's Manual

ManualsBrandsTop Victory Electronics ManualsComputers & Accessories19" Color Monitor

Your Work Never Looked Better

Plug & Play Drivers for the AOC Spectrum Series Monitors are available

at : www.epius.com

9Slr/9Glr/9Klr

USER MANUAL

TABLE OF CONTENTS

FOR YOUR SAFETY -------------------------------------------------- 1

SAFETY PRECAUTIONS -------------------------------------- 2

BEFORE YOU OPERATE THE MONITOR ---------------------- 3

FEATURES -------------------------------------------------------- 3

PACKING LIST --------------------------------------------------- 3

INSTALLATION INSTRUCTIONS --------------------------- 3

CONTROLS AND CONNECTORS -------------------------- 4

OPERATING INSTRUCTIONS ------------------------------------- 5

GENERAL INSTRUCTIONS ---------------------------------- 5

HOW TO ADJUST A SETTING ------------------------------ 7

ADJUSTING THE PICTURE ---------------------------------- 7

POWER MANAGEMENT FEATURE ----------------------- 9

PLUG AND PLAY ------------------------------------------------10

TECHNICAL SUPPORT(FAQ) -------------------------------------12

APPENDIX ---------------------------------------------------------------13

SPECIFICATIONS -------------------------------------------13-14

FACTORY PRESET TIMING TABLE -----------------------15

CONNECTOR PIN ASSIGNMENT --------------------------15

Thank you very much for choosing the AOC Color Monitor.

We recommend that you take a few minutes to read carefully through this

brief but comprehensive manual before installing and switching on the

monitor. Please keep this manual in a safe place for you future reference.

Summary of content (16 pages)

PAGE 1
Your Work Never Looked Better 9Slr/9Glr/9Klr USER MANUAL TABLE OF CONTENTS FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 BEFORE YOU OPERATE THE MONITOR ---------------------- 3 FEATURES -------------------------------------------------------- 3 PACKING LIST --------------------------------------------------- 3 INSTALLATION INSTRUCTIONS --------------------------- 3 CONTROLS AND CONNECTORS -------------------------- 4 OPERATI
PAGE 2
Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
PRECAUTIONS z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
PAGE 4
BEFORE YOU OPERATE THE MONITOR FEATURES • • • • • • 48.3cm(19”) Pure Flat Color Monitor Crisp, Clear Display for Windows Supports Resolutions up to 1600 x 1200 Power Management Ergonomic Design (TCO’99 Approved) Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE MONITOR PACKAGE The product package should include the following items: 1. 2. 3. 4.
PAGE 5
POWER CORD Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. ) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.
PAGE 6
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • Connect the video cable from the monitor to the video card. Connect the power cord and the power indicator will light up. • Your monitor features a unique quick switch system which provides a picture within seconds after the monitor is switched on.
PAGE 7
FRONT PANEL CONTROL • Shuttle Knob : The Shuttle Knob is used to control the monitor functions. Rotate to switch functions or adjust settings. Press to select or execute a function . • Power Indicator : Green Orange — — Power On mode. Stand-by mode, Suspend mode, or Off mode. SWIVEL BASE CONTROL ( 9SlrA ONLY ) : • Audio Power ON or OFF Audio Power • Power Indicator Green — Audio Power ON. • Volume Adjustable Audio volume.
PAGE 8
HOW TO ADJUST A SETTING 1. Press the Shuttle Knob or OSD Key to make the OSD window appear. See figure 4. 2. Rotate the Shuttle Knob to select the desired function. See figure 4. 3. Press the Shuttle Knob again to select the function that you want to adjust. 4. Rotate the Shuttle Knob to change the settings of the current function. 5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizontal frequency and "V" for the vertical frequency. 6.
PAGE 9
6. V- SIZE Adjust the picture’s vertical size. ZOOM Adjust the picture’s horizontal and vertical size simultaneously. 8. PINCUSHION Adjust the pincushion and barrel 9. TRAPEZOID Adjust the picture’s trapezoid distortion. 10. PIN-BALANCE Adjust to compensate the pincushion unbalance. 11. PARALLELOGRAM Adjust the picture to be a rectangle. 12. ROTATION Adjust the picture tilt to horizontal position. 6500°K/9300°K ( COLOR TEMPERATURE ) The color temperature for 6500°K is x=0.313, y=0.
PAGE 10
POWER MANAGEMENT FEATURE The power management feature of this product complies with every power saving requirements of ENERGY STAR and VESA DPMS when activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS computer. There are three power management modes available, these are described below. The required settings, including the timer setting, should be made by the computer.
PAGE 11
FEATURES Green monitor • The monitor has a power saving function that conforms to the VESA DPMS standard. This feature will only work if your PC is a green PC. This feature is similar to a screen saver, except that your monitor will turn it off instead of activating the screen saver. ® To activate this feature in Windows 98 : ® In Windows 98, this feature can be activated and customized under the screen saver setting of the display properties. 1. 2. 3. 4. Right click on the desktop and choose Properties.
PAGE 12
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Power Management standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees ( NUTEK ).
PAGE 13
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play No picture Picture is fuzzy Picture bounces or a wave pattern is present in the picture Monitor is stuck in “Power Saving Mode” Missing one of the primary colors (RED, GREEN, or BLUE) North America technical support telephone number: Possible Solution *Power Cord should be connected *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is
PAGE 14
APPENDIX SPECIFICATIONS CRT Input CRT Size 48.3cm(19"), 29mm neck, Viewable Image Size Type Video Separate Sync. H./V.- Sync. H-Frequency V-Frequency 45.7cm (18.0"), diagonal Scanning Frequency Max. Resolution Video Dot Rate Factory Preset mode : User Programmable mode : Power Source Operating Humidity Dimensions 9Slr: 9SlrA: Weight 9Slr: 9SlrA: Signal Cable: 0.25 mm dot pitch. 0.
PAGE 15
• • • • • • • • • • • • • • • • • • • • • • Switch External Controls: Shuttle Knob Volume(9SlrA) Contrast Brightness H-Center H-Size V-Center V-Size ZOOM Pincushion Trapezoid Pin-Balance Parallelogram Rotation 6500°K User Color 9300°K Degauss Moire Reduce Recall Exit Language DDC1/2B EPA, VESA DPMS 130 Watts 346mm x 260mm Rated Power 1W rms (Per channel) UL, CSA, FDA, FCC, TÜV/GS, CE, TCO’99 Functions Plug & Play Power Management Power Consumption Pre-set Display Area Audio Output (for 9SlrA only) Regul
PAGE 16
FACTORY PRESET TIMING TABLE HORIZONTAL FREQUENCY VERTICAL FREQUENCY STANDARD RESOLUTION VGA 720 × 400 31.5kHz 70Hz VGA 640 × 480 31.5kHz 60Hz VESA/85 640 × 480 43.3kHz 85Hz VESA/85 800 × 600 53.7kHz 85Hz VESA/85 1024 × 768 68.7kHz 85Hz VESA/85 1280× 960 85.9kHz 85Hz VESA/85 1280× 1024 91.1kHz 85Hz VESA/75 1600× 1200 93.8kHz 75Hz VESA/85 1600× 1200 106.25kHz 85Hz CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5.