Product Specification Product Specification 305GLUSBGA52AC & 305GLUSBGA52AC-L5 IEEE 802.11n USB2.
Product Specification Table of Contents Chapter 1 Introduction _____________________________________________________ 4 1. Introduction ________________________________________________________ 4 1.1 Product Features ____________________________________________________ 4 1.2 Applications _______________________________________________________ 4 Chapter 2 Hardware _______________________________________________________ 5 2.1 General Overview __________________________________________________ 5 2.
Product Specification Revision History Edition # Reason for revision Issue date Written by V 01 ♦ Initial Document Nov 18 2009 Troy Chen V 02 ♦ Add Pin-definition Nov 19 2009 Troy Chen ♦ Revise Main chipset configuration V 03 ♦ Update PCB outline & antenna spec. Jul 30 2010 Andre Lin V 04 ♦ Update chip info & antenna spec.
Product Specification Chapter 1 1. Introduction Introduction 305GLUSBGA52AC (500mm antenna) and 305GLUSBGA52AC-L5 (500mm antenna) are wireless 1x1 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 150 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11b and IEEE 802.11g ,and draft IEEE 802.11n standards.
Product Specification Chapter 2 Hardware 2.1 General Overview ♦ USB 2.0 Interface and 802.11 n chipset-on-board design. ♦ 1 antenna connector (Reserve one more antenna for diversity) 2.2 Hardware Architecture BRCM 4319 2.3 Main Chipset Information BRCM 4319G: Single-band 2.4 GHz 802.11 b, g, and n. integrated with MAC/Baseband/RF BRCM 4319X: Dual-band 2.4 GHz and 5 GHz 802.11 a, b, g, and n. integrated with MAC/Baseband/RF 2.4 PCB dimension 55.
Product Specification 2. 5 Block Diagram 2.
Product Specification Chapter 3 Software 3.1 Operating System Supported ♦ Windows 2000, XP, Vista 3.2 Wireless Mode Supported ♦ AP (Infrastructure) Client mode 3.3 Security ♦ AP (Infrastructure) mode supports ♦ Static WEP that support both 64 and 128 bit keys. ♦ WPA(TKIP) with PSK ♦ Ad-hoc mode supports ♦ None (plaintext) ♦ Static WEP that supports both 64 and 128 bit keys.
Product Specification Chapter 4 ♦ Specifications Frequency Band: Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC ♦ Operating Channels: IEEE 802.11b/g/n compliant: 11 channels (US, Canada) ♦ Transmit Power and Sensitivity: TX Output Power:(Typical) 11b 15 +/- 1.5 dBm 11g 14 +/- 1.5 dBm 11n (HT20) 13 +/- 1.5 dBm 11n (HT40) 12 +/- 1.
Product Specification 16-QAM@24Mbps 64-QAM@48/54Mpb and above, RX up to 135Mbps ♦ Data rate: 11b/g: 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2,1 Mbps 11n: 20MHz BW: 65, 58.5, 52, 39, 26, 19.5, 13, and 6.5Mbps 40MHz BW: 135, , 121.5, 108, 81, 54, 40.5, 27and 13.5Mbps ♦ Current Consumption (5V DC) TX: 170mA, HT20; 180mA, HT40 at 3.3V RX: 160mA, HT20; 160 mA HT40 at 3.
Product Specification References ♦ ♦ ♦ ♦ BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
Product Specification FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
