241-8504 1.6 AMP OSCILLATING TOOL Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference. For questions/comments, technical assistance or repair parts Please call toll free at:1-866-915-8626(M-F 8am-5pm EST) Or send email to: serviceusa@jumbotool.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. ! READ ALL INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools in damp, wet, or poorly lit locations. Don’t expose your tool to rain. Keep the work area well lit.
IMPORTANT SAFETY INSTRUCTIONS 15. USE EYE PROTECTION. Use a full-face mask if the work you’re doing produces metal filings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work involves creating a lot of fine or coarse dust. 16. SECURE WORK. Use clamps or a vise to hold the work. It’s safer than using your hands and it frees both hands to operate the tool. 17. DON’T OVERREACH. Keep proper footing and balance at all times.
SPECIFICATIONS Voltage: 120V/60Hz Rated input: 1.6A No load speed: 23000/min Includes: 1pc 1pc 1pc Hex Wrench 3pcs Sanding Paper Sanding Pad Cutting Blade FUNCTION DESCRIPTION A. B. C. D. E. F. B A ON - OFF Switch Soft Grip Hex wrench Cutting Blade Sanding Paper Sanding Pad F E D C Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings before set up or use of this product.
PROCEDURES Work Piece And Work Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury and distraction. 2. Route the Power Cord (44) along a safe route to reach the work area without creating a tripping hazard or exposing the Power Cord to possible damage. The Power Cord must reach the work area with enough extra length to allow free movement while working. 3.
Procedures not specifically explained in this manual must be performed only by a qualified technician. Warning: to prevent serious injury from accidental operation: Turn the Power Switch (35) of the tool to its “off” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from tool failure: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1.
SCHEMATIC DRAWING 14 15 13 16 17 18 12 19 11 20 10 24 21 9 22 25 23 8 26 27 7 28 29 6 30 32 502 501 34 35 3 4 505 33 42 43 44 38 2 504 39 40 7 41 36 37 3 2 31
TOOL SHOP® 1.6AMP OSCILLATING TOOL Or send email to: serviceusa@jumbotool.
