TOWER SPEAKER SYSTEM WITH BLUETOOTH®® WIRELESS TECHNOLOGY Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: TA-304B Size: 148.
1
Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the unit. Insert the AC/DC adaptor to a wall outlet having AC 100-240V~, 50/60Hz . TO DC IN JACK NOTE: This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position. To Wall Outlet 2. Wooden Base 6 5 1 4 2 3 as the figures above.
Supplied screwdriver 1. Assembly the two wooden bases to the bottom of unit by the supplied assembly screws and screwdriver as the figure above.
1. FM ANT (FM ANTENNA) 2. POWER ON/OFF SWITCH 3. DC IN JACK 1 4. AUX IN 2 JACKS 5. AUX IN 1 JACK 6. 4 2 (BLUE TOOTH) INDICATOR 7. AUX 1 INDICATOR 8. AUX 2 INDICATOR 3 9. STANDBY/FM INDICATOR 5 10. SOURCE BUTTON 11. STANDBY ON/OFF BUTTON 12. VOL - (VOLUME DOWN) BUTTON 13. VOL + (VOLUME UP) BUTTON 14. TUNE +/ BUTTON 15.
1 2 3 4 6 5 7 8 10 9 1. Standby ON/OFF BUTTON 6. (PLAY/PAUSE) BUTTON 2. (MUTE) BUTTON 7. TUNE +/ BUTTON 3. SOURCE BUTTON 8. VOL (VOLUME) +/- BUTTONS 4. RESET BUTTON 9. TREBLE +/- BUTTONS 5. TUNE -/ 10.
BATTERY PRECAUTIONS:
CONNECTION Connect to External Audio Device with 3.
OPERATIONS: 1. Connected the external Audio or Video/Audio Devices to the unit as previous procedures. 2. Slide the POWER ON/OFF Switch on the rear of unit to ON position to turn the unit to Standby mode. The Power Indicator will light. 3. Press and hold the button on the unit or press the button on the Remote Control to turn on the unit from Standby mode. 4. Press the SOURCE button on the unit or Remote Control to select input source as desire. A.
DC DC 12V,2A 3V,1 x CR 2025 button cell (Included) FM 87.5-108 MHz 4 x 4 Ohms, 6 W Accessories: 1 x Remote Control ( uses 1 x CR 2025 button cell,induded ) 1 x AC/DC Adaptor ( Input: AC 100-240V~,50/60Hz 1A; Output DC 1 x Audio Connection Cable with 3.
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $12.00 (to cover shipping and handling costs) payable to Craig Electronics Inc.