SMART LOCK INSTRUCTION Model:B3 Ver.21103001 Caution:The key is used as an emergency unlocking method, please do not put it indoors! Product schematic diagram Technical parameters Material Zinc alloy Colour Black /Coffee gold Information 300 pcs Fingerprint ≤0.3S capacity Fingerprints: 50pcs response speed Fingerprint semiconductor Static power <80ua Power supply 4 AAA batteries product weight 0.
Applicable Office doors, home wooden doors, etc. door Installation guide 1. Reversing instructions Hole distance 39.5mm Reversing indicator Firstly, confirm whether the lock body is a "single tongue lock body" or a "double tongue lock body", then, take out the Link pole from the accessory kit and insert it into the hole on the front panel, rotate the Link pole to adjust the door opening direction. 1) When using the "single tongue lock body", please turn the "reversing indicator" to the "S".
Non-essential 1)Before installation, measure the thickness of the door and take out the Link Pole ⑤ from the accessory kit. Confirm whether the length of the Link pole is appropriate.The length of the Link pole generally exceeds the actual thickness of Door thickness35-55mm Link pole Door side Link pole length =Actual thickness of the door+38mm the door by 35~40mm.
and use the screws ⑧ to lock the front and rear panels; Adjust the position, manually rotate the front and back panels left and right, and check whether the left and right rotation is normal; 6)Adjust the inner and outer plates, manually rotate the outer and inner panels left and right, finally, check whether they rotate normally; 7)Install 4 AAA batteries in the battery box⑨, put them into the back panel ⑦,connecting power line, close the battery cover ⑩, fasten the screws ⑪, and finish the installation;
1. User Management Add user information, the number of secondary administrators is 10, and the rest are ordinary users. When the add information box interface pops up, users could directly enter the information of any unlocking method of "fingerprint", "password" (the same unlocking key collection times are: fingerprint collection 5 times, password entry 2 times).When collecting fingerprints, put your finger on the fingerprint head and make the collection area as larger as possible.
4. Authorization Remotely authorize other users to manage locks. Authorized users must register for the "DADA LOCK" APP. This function is limited to super administrators and is suitable for Apartment and Homestay management. It also can set the password validity period or number of times, modify or delete authorized users. 5.
3)Sound setting:The value 0 is silent mode, and the other numbers are the sound on state.
6)Firmware upgrade: When the latest software version is available, in the Bluetooth connection state, you can upgrade the latest firmware online in the APP. The upgrade takes about 1 minute. Please do not operate the phone during the upgrade process. If there is an interruption or no response, please exit and reupgrade. After the upgrade is successful, if the lock does not respond, please remove the battery and re-energize it.
This device complies with part 15 of the FCC rules,Operation is subject to the Following two conditions(1) this device may not cause harmful interference and (2)this device must accept any interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.