User Manual GK5CQ7Z
Notice The information in this user’s manual is protected by copyright laws, all parts of this manual, including the products and software described in it, can not be reproduced, transmitted, transcribed, stored in a retrieval system, nor translated into any language. THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
TABLE OF CONTENTS Notice....................................................................................................... 2 Preface..................................................................................................... 5 1.1 Regulations Information..................................................................... 6 1.2 Safety Instructions.............................................................................. 9 1.3 Conventions for this Manual.....................................
.1 About BIOS Setup............................................................................ 35 4.1.1 When to Use BIOS Setup ?........................................................... 35 4.1.2 How to Run BIOS Setup ?............................................................. 35 4.2 BIOS Setup Menu............................................................................ 37 4.2.1 Main Menu..................................................................................... 37 4.2.2 Advanced Menu ..
Chapter 1 Preface English Notebook Manual 5
1.1 Regulations Information ¤ CE compliance This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMC Directive 2014/30/EU, - Low Voltage Directive 2014/35/EU(equals A2 : 2013) , - R&TTE Directive 1999/5/EC he unit can be operated at an ambient temperature of max. 35°C T (95°F). Do not subject it to temperatures below 5°C (41°F) or above 40°C (104 °F).
FCC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
1.2 Safety Instructions 100k g 1 2 5 4 3 1 Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. 2 Never cover or block the air vents including those located at the base of the computer. Never cover your computer or AC adapter with any object. 3 To keep your computer in prime operating condition, protect your work area from direct sunlight.
1.3 Conventions for this Manual CAUTION : T his message contains important information that must be followed for safe operation. NOTE : This message contains information for special situations.
1.4 Release History English Version Date Revision 1.
Chapter 2 Getting to know the basics 12 Notebook Manual English
2.1 Product Specification This User’s Manual provides technical information of instructions and illustrations on how to operate this notebook for the customer. Please read this manual carefully before using this notebook. ・Physical Characteristic Dimension 359* 242* 19~(23)mm 2.
・I/O Port DC-in x1 USB USB 3.1 X 2 (Gen1) USB 2.0 X 1 USB type C USB 3.
・Input Keyboard Mechanical KB with RGB backlight support, Pointing Device Touch pad 104*72 ・Display LCD 15.6" FHD, 16:9,45% / 72% , (Narrow border ) ・Communication Port LAN Supports 10/100/1000 Mb/Sec Wireless LAN *M.2 2230 w/ CNVI interface *IEEE802.
・Storage HDD 7mm height SSD *2 Slots (NVMe) *M.2 2280, Slot 1 : NVMe/PCIEX4,Slot 2: NVMe/PCIEX4/SATAX1 *RAID 0/1 support ・Power AC Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 180 Watts (19.5V/9.23A), 3 Pins Battery Li- polymer Battery, SW Gas Gauge IC, soft pack, 3 cells (3S1P 4100mAh) 46.74Wh 4 cells (4S1P 4100mAh) 62.32Wh(Optional) CAUTION: M ODEL IS DESIGNED TO USE WITH THE DC INPUT: 19.5V/9.
2.2 Preparing your Computer English A Connect the AC adapter’s DC output plug to the DC IN jack. B The display panel can be opened to a wide range of angles for optimal viewing. C Press the power button to turn on your notebook computer.
2.3 Product Overview Please become familiar with each component before you operate the computer. Top-Open View NOTE: The product’s color/ LED color, I/O port, indicator location, and specification will depend upon the actually shipping product. 1 2 3 4 5 6 7 8 9 CAUTION:When you are not using the computer, keep the LCDscreen closed to protect it from dust.
1 Webcam A device that allows you to record video or take photographs with your computer. 2 Camera Status LED The Camera Status LED shows the Camera status. 3 Microphone Built-in microphone. 4 LCD screen Displays of your notebook computer.
7 Quick launch button 8 Keyboard FAN full speed ON/OFF Full 15.6" KB with RGB backlight support. (The keyboard will depend upon the actually shipping product) 9 Touchpad/Click pad Touch-sensitive pointing device which functions like the mouse.
Right Side View 1 1 2 3 USB Ports Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. 2 2 in 1 Card Reader Insert Memory Card. 3 Vents The thermal vents are designed to cool the internal components and avoid overheating.
Left Side View 1 1 2 3 4 5 Vents The thermal vents are designed to cool the internal components and avoid overheating. 2 Network Jack This jack lets you connect to a LAN. 3 USB Ports 4 Mic In Jack Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. Connects amplified speakers, headphones or microphone into this jack. 5 Audio Out Jack Connects amplified speakers, headphones or microphone into this jack.
Bottom Side View NOTE : The product’s thermal vent will depend upon the actually shipping product. 1 2 3 1 Vents 2 HDD / RAM / SSD / WLAN Compartment Cover Screws The thermal vents are designed to cool the internal components and avoid overheating. You can remove the screws to install or remove the HDD / RAM / SSD / WLAN compartment cover. ( Please refer to the HDD / RAM / SSD / WLAN compartment view on the following page.
HDD / RAM / SSD / WLAN Compartment View (Optional) PCIE SSD ATA) PCIE or SATA SSD SPEAKER WLAN SPEAKER PCIE SSD ATA) PCIE or SATA SSD SPEAKER WLAN SPEAKER If need to upgrade SATA SSD to PCIE SSD, Please contact technical support and after-sales service . CAUTION: Do not put the computer on your LAP or other Parts of the body to avoid injury from the heat.
Front Side View 1 1 Light bar Light bar Choose from APP English Notebook Manual 25
Back Side View 1 2 3 4 5 Vents 1 The thermal vents are designed to cool the internal components and avoid overheating. Mini Display Port 2 Connected to the screen, or home theater system. 3 HDMI port Supports high-definition digital video connections. 4 USB Port (USB Type C) Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack. With charging function. 5 Power Connector Connects the AC adapter into this connector.
Chapter 3 Getting started English Notebook Manual 27
3.1 AC Adapter Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.
3.2 Knowing the Keyboard The following defines the colored hot keys on the Keyboard. The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command. NOTE: The number of keys available on your keyboard will depend on the country/region in which the keyboard was designed and built.
3.2.1 For keyboard users To activate these functions, press the hot key associated with the desired function as below : Function Keys Keypad 30 Function Description + Suspend: Press this key combination (Fn+F1) to enter sleep mode. + Windows Lock/On: Press this key combination (Fn+F2) to turn Windows Lock/On . + Display mode: Press this key combination (Fn+F3) to enable Display Mode. + RADIO On/Off: Press this key combination (Fn+F4) to turn all radios on or off.
Function Keys Keypad Function Description Keyboard Brightness down: Press this key combination (Fn+F6) to decrease brightness of Keyboard. + Keyboard Brightness up: Press this key combination (Fn+F7) to increase brightness of Keyboard. + MUTE: Press this key combination (Fn+F8) to enter MUTE mode. + Volume down: Press this key combination (Fn+F9) to enter Volume down mode. + Volume up: Press this key combination (Fn+F10) to enter Volume up mode.
Function Keys Keypad 32 Function Description + Search Charm : (Optional) Press this key combination (Windows logo key+Q) to open the search charm and search apps. + Settings Charm : (Optional) Press this key combination (Windows logo key+I) to open the settings charm. + Share Charm : (Optional) Press this key combination (Windows logo key+H) to open the share charm. + Devices Charm : (Optional) Press this key combination (Windows logo key+K) to open the devices charm.
3.3 Using the touchpad / clickpad The touchpad / clickpad is a rectangular electronic panel located just below your keyboard. Click twice left corner will open or close (Green light) touchpad functionality.You can use the static-sensitive panel of the touchpad / clickpad and slide it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. Press the left 1 and right 2 buttons located on the edge of the touchpad / clickpad to make selections and run functions.
Chapter 4 BIOS setup 34 Notebook Manual English
4.1 About BIOS Setup 4.1.1 When to Use BIOS Setup ? You may need to run the BIOS Setup when: ・ An error message appears on the screen during the system booting up and is requested to run SETUP. ・ You want to change the default settings for customized features. ・You want to reload the default BIOS settings. 4.1.2 How to Run BIOS Setup ? To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
4.2 BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. Main Menu Show system overview about memory size, main HDD or ODD and setting of system time and date. Advanced Menu To select the XD feature enable or disable XD feature only work with Intel platform + Windows. Security Menu Install or clear the password settings for supervisor and user. Boot Menu Configure Settings during System Boot.
4.2.1 Main Menu ・System Time This item allows you to set the system time. There is a small internal (CMOS) battery which is designed to maintain your system clock. It is designed to maintain time even when the PC is powered down or in sleep mode. The time format is [hour:minute:second]. Use [+] or [-] to configure system Time. ・System Date This item allows you to set the system date. The date format is [day:month:date:year]. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.
Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month (Month) The month from 01 (January) to 12 (December). Date (Date) The date from 01 to 31. Year (Year) The year can be adjusted by users. ・Total Memory This allows you to see the total amount of memory.
4.2.2 Advanced Menu • Wake on LAN Enable/Disable integrated LAN to wake the system. • Serial ATA HDD It will show AHCI SATA HDD info.
・NVMe Device It will show NVMe Device info. ・Intel Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. ・RAID mode reminder Please update strip size in BIOS to 128K in order for RAID to optimize performance.
4.2.3 Security Menu ・Change Administrator Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of 20-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. It is extremely important to keep record for any BIOS password which is set as it can not be reset even with the removal of a CMOS battery for the security of your PC.
Select Change User Password to give or to abandon password setting same as Change Administrator Password item above. Note that Administrator Password field allows users to enter and change the settings of the BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. The Password Check item is used to specify the type of BIOS password protection that is implemented.
4.2.4 Boot Menu ・Boot Configuration Configure Settings during System Boot. ・LAN Remote Boot [Disable]: Boot from LAN or not. ・Set Boot Priority (1st/2nd/3rd/..... Boot) Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. ・ Hard Disk Drive / USB HardDisk Drive Specifies the Boot Device Priority sequence.
4.2.5 Exit Menu ・Save Changes and Reset Exit system setup after saving the changes.F4 key can be used for this operation. ・Discard Changes and Exit Exit system setup without saving any changes. ESC key can be used for this operation. ・Restore Defaults Restore/Load Defaults values for all the setup options. F3 key can be used for this operation.
