TomTom GO SUPREME User Manual 18.
Contents Welcome to navigation with TomTom 7 Features 9 Your TomTom GO SUPREME ...................................................................................... 9 Video workshops ................................................................................................. 10 Get going 11 Installing in your car ............................................................................................ 11 Positioning your TomTom GO SUPREME .....................................................
Using gestures .................................................................................................... 35 Changing the text and button size ............................................................................ 36 Reordering the Main Menu buttons ........................................................................... 36 TomTom MyDrive and TomTom Road Trips 38 About TomTom MyDrive ........................................................................................
About search .................................................................................................. 77 Entering search terms ....................................................................................... 78 Working with search results ................................................................................ 79 About postal codes .......................................................................................... 80 List of POI type icons ....................................
What you can use voice control for.......................................................................... 125 Saying commands in different ways ......................................................................... 126 Entering an address using voice control .................................................................... 126 Going home using voice control .............................................................................. 127 Going to a POI using voice control .........................
Receiving an SMS or IM ......................................................................................... 148 Switching off messages ........................................................................................ 148 Talking to Siri or Google Now ................................................................................. 149 Sending your location and ETA ............................................................................... 150 Settings 151 Appearance ......................
Welcome to navigation with TomTom Welcome to your TomTom GO SUPREME, your ultimate driving companion! We know you probably have more exciting things to do than read manuals, so here are some quick links to some important parts: Your TomTom GO SUPREME Installing in your car Connecting a smartphone Connecting to a Wi-Fi network What's on the screen And here is a guide to which features you can use at which point in your trip: Before your drive During your drive After your drive TomTom MyDrive
Send your location and ETA We hope you enjoy discovering your next adventure using your new TomTom GO SUPREME! Tip: There are also frequently asked questions (FAQs) at tomtom.com/support. Select your product model from the list or enter a search term.
Features Your TomTom GO SUPREME Here are some of the features of your TomTom GO SUPREME and TomTom GO SUPREME X and shortcuts to more information. Last Mile Navigation and Find My Car If you park your car a short distance away from your final destination, you are now offered navigation instructions in the TomTom MyDrive app so you can walk to your destination. Also on the way back, you are offered navigation instructions so that you can find your car.
Hands-free calling You can make and receive high quality calls in your car. Simply connect your phone to your device. Learn more: About hands-free calling Compatibility with Siri and Google Now Activate and talk to Siri or Google Now by tapping a button on your TomTom GO SUPREME and using the built-in microphone. Get full access to your personal assistant with your phone safely tucked away in your bag or pocket.
Get going Installing in your car Use the supplied mount to install your TomTom GO SUPREME in your vehicle. Read the instructions about positioning your device before you install your TomTom GO SUPREME. To install your TomTom GO SUPREME, do the following: 1. Connect the supplied USB cable to the mount. If the mount is integrated into your TomTom GO PREMIUM, connect the USB cable to the device. Note: Use ONLY the USB cable supplied with your TomTom GO SUPREME. Other USB cables may not work. 2.
Putting your device to sleep To put your navigation device to sleep, press the On/Off button and then release it. You can also press the On/Off button for more than 2 seconds until you see the Sleep and Turn Off buttons. Select Sleep to make the device sleep. Tip: To send your navigation device to sleep when the USB cable is unplugged or whenever it is removed from the mount, go to Battery settings in the Settings menu.
Memory card slot Some TomTom navigation devices have a memory card slot that is located on the side or bottom of the device. Before you use the memory card slot, make sure that your navigation device has the latest software version installed by selecting Updates & New Items in the Settings menu. When your TomTom GO SUPREME is up-to-date, you can use a memory card as extra storage space to store downloaded maps or to store routes and tracks on your device.
TomTom services About TomTom services Tip: To access settings and the status of your services quickly, select the menu bar at the top of the main menu. In portrait mode, you can also tap the icons down the right-hand side. Your TomTom GO SUPREME connects to TomTom services using your smartphone. To get TomTom services on your TomTom GO SUPREME you need the following items: Any TomTom GO SUPREME. A smartphone with a data plan from a mobile services provider.
Note: Some TomTom services might not be available in your current location.
Connecting a smartphone Why do I want to connect a smartphone to my device? If you don't have an always-connected device, connect your smartphone to your TomTom GO SUPREME to use these features: TomTom services Receive real-time traffic information, safety camera updates, and TomTom MyDrive using your phone’s data connection. This feature uses approximately 7 MB of data per month. Note: Smartphone-connected devices only. Always-connected devices receive services over GPRS.
5. Select Bluetooth. 6. Select Add Phone. 7. Follow the steps in the app and on your TomTom GO SUPREME to pair your phone with your TomTom GO SUPREME. Your phone's call history and frequent contacts are imported into your navigation device. When your phone is connected and hands-free calling is enabled you see this icon on the map or guidance view: You can easily change the phone features you want to use in Bluetooth in the Settings menu.
Clearing the pairing history To clear the pairing history on your device, go to Settings, then Bluetooth and delete the previous Bluetooth pairings under Paired Device. The pairing history on your phone can be cleared in the Bluetooth settings of Android/iOS. Reconnecting a smartphone Your TomTom GO SUPREME will remember your phone and find it automatically when your phone's Bluetooth is switched on and the phone is in range of your navigation device.
Note: Some mobile service providers do not allow their users to use a PAN. If your phone does not have the PAN function, you should contact your service provider for more information. Please check the user guide for your phone if you are having trouble finding the settings. For more help, go to tomtom.com/connect.
Wi-Fi connection About Wi-Fi® The easiest way to manage your maps, software, and all your device content is over a Wi-Fi connection. Your device can be updated using Wi-Fi without the need to connect to a computer. It remembers previously connected Wi-Fi networks so you can keep your device up-to-date when you are in range of that network. Before you begin, make sure that you have access to an unrestricted Wi-Fi network, such as a personal home network.
Forgetting a Wi-Fi network To forget a Wi-Fi network from your list of available networks do the following: 1. Select Settings in the Main Menu, then select Wi-Fi. You see a list of available Wi-Fi networks and saved Wi-Fi networks that are currently out of range. Tip: Scroll down to go to the list of out-of-range saved networks. 2. Select the Wi-Fi network that you want to forget. 3. Select Modify then select Forget. Your device is disconnected from the Wi-Fi network.
Map Share updates These updates are created from changes made and shared by other TomTom users and contain the following changes or updates: Speed limits Street names Recently blocked and unblocked roads Traffic directions Turn restrictions For more information, see Map Share. Safety Camera updates When a Safety Camera update is offered, you can choose which countries on your map you want to update. Voices You may also be offered new voices as an update.
Tip: Logging in to use Updates and New Items also logs you in so you are ready to use TomTom MyDrive.
What's on the screen The map view The map view is shown when you have no planned route. Your actual location is shown as soon as your TomTom GO SUPREME has found your GPS location. You can use map view in the same way as you might look at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons.
1. Back button. This button returns the map to an overview of your whole route or, if no route is planned, moves the map to put your current location at the center. 2. Switch view button. Select the switch view button to change between the map view and the guidance view. When in map view, if you are driving, the small arrow rotates to indicate your direction of travel relative to north, with north being up.
9. Your route, if you have planned a route. Select the route to clear it, change the route type, add a stop or save changes to your route. 10. Safety cameras on your route. Select a safety camera to display information about that camera. 11. Route bar. The route bar is shown when you have planned a route. The guidance view The guidance view is used to guide you along the route to your destination. The guidance view is shown when you start driving.
Tip: The compass direction you are driving is shown in the switch view button below the small compass arrow, for example, NE for North East. These compass directions automatically appear when driving in North America and disappear if you leave North America. 2. Zoom buttons. Select the zoom buttons to zoom in and out. Tip: On some devices you can also pinch to zoom in and out. 3. Instruction panel. This panel shows the following information: The direction of your next turn.
The arrival information panel shows the following information: Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. The estimated time that you will arrive at your destination. The length of time to drive to the destination from your current location.
For remaining distances longer than 31 miles (50 km), only the next 31 miles (50 km) is shown. The destination icon is not shown. Tip: You can scroll the route bar to see your whole route (not available on iOS). For remaining distances between 6 miles (10 km) and 31 miles (50 km), the complete distance is shown. The destination icon is shown fixed at the top of the route bar. For remaining distances of less than 6 miles (10 km) the complete distance is shown.
Point of Interest In the Drive To menu, select this button to search for a point of interest, then plan a route to that location. Latitude Longitude In the Drive To menu, select this button to search for a latitude-longitude coordinate, then plan a route to that location. Select this button to drive to your home location. If this button is not included in your Main Menu, go to My Places to set up your home location.
My Places Select this button to show your saved places. My Routes Select this button to show your saved routes. Record Route Voice Recognition Select this button to start or stop recording a track. Select this button to start voice recognition. Tip: You can also say the wake-up phrase to start voice recognition. Parking Gas Station Trip Statistics Select this button to find parking lots/garages. Select this button to find gas stations.
Report Safety Camera Contacts Select this button to report a safety camera. Select this button to synchronize your phone book from your phone to your device. Note: This button is only shown if hands-free calling has been set up. Select this button to open the Settings Menu. Tip: To access settings and the status of your services quickly, select the menu bar at the top of the main menu. In portrait mode, you can also tap the icons down the right-hand side.
The quick access screen opens. You see the status of your services including Traffic, MyDrive, Bluetooth, and Wi-Fi. When you select a service you see more info on your connection status or, if unconnected, how to connect. Select Settings to go to the full Settings menu. Smaller buttons and symbols On the map view or guidance view, select the Main Menu button to open the Main Menu.
This symbol shows that your TomTom GO SUPREME is not connected to Traffic. This symbol shows that your TomTom GO SUPREME is connected to TomTom MyDrive. This symbol shows that your TomTom GO SUPREME is not connected to TomTom MyDrive. This symbol shows that your device is connected to the internet using Wi-Fi. This symbol shows that your device is not connected to the internet using Wi-Fi. This button shows that you will hear voice instructions. Select the button to switch off voice instructions.
Volume control On the map or guidance view, select the Main Menu button to open the Main Menu. Select and slide the volume control to change the volume of voice instructions and warnings. If the voice instructions are turned off, the volume control will still change the volume of the warnings. Using gestures You use gestures to control your TomTom GO SUPREME. In this User Manual, you learn how to use gestures to control your TomTom GO SUPREME. Below is an explanation of each gesture.
Changing the text and button size You can change the size of the text and the buttons you see on the screen, for example to make the text easier to read and the buttons easier to use. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. To change the size of the text and the buttons, select the Settings button in the Main Menu, then select Appearance, then select Size of text and buttons. Your device must restart to apply the change.
TomTom MyDrive and TomTom Road Trips About TomTom MyDrive TomTom MyDrive is the easy way to set a destination, share locations and favourites, and save your personal navigation information. TomTom MyDrive synchronizes your TomTom GO SUPREME with your TomTom account. You can use TomTom MyDrive in a web browser on a computer or as a mobile app on a smartphone or tablet. Important: To use TomTom MyDrive you need a compatible navigation device.
Logging into MyDrive using a web browser or the TomTom MyDrive app Log in using your TomTom account email address and password. When you are logged in, you can see your personal navigation information from your navigation devices, and you can select destinations and create Places to sync with your navigation devices. Tip: To access settings and the status of your services quickly, select the menu bar at the top of the main menu. In portrait mode, you can also tap the icons down the right-hand side.
Traffic About TomTom Traffic TomTom Traffic is a TomTom service providing real-time traffic information. In combination with historical road usage data, TomTom Traffic helps you plan the optimum route to your destination taking into account the current local traffic conditions and the weather. Your TomTom GO SUPREME regularly receives information about the changing traffic conditions.
Tip: Select an incident on the map to see more detailed information. 1. Traffic incident that affects your route in your direction of travel. A symbol or number at the start of the incident shows the type of incident or the delay in minutes, for example 5 minutes. The color of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate.
To get more information about an incident, select an incident in the route bar. The map opens zoomed in on the incident and an information panel opens showing detailed information about the traffic incident. The information shown includes: The The The The cause of the traffic incident - for example accident, road works, lane closure, or weather. severity of the incident - slow traffic, traffic lining up or stopped traffic. delay time. length of the incident.
The color of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate. Traffic speed is 0% to 20% of the allowed speed. Traffic speed is 20% to 40% of the allowed speed. Traffic speed is 40% to 100% of the allowed speed. Traffic speed is normal. Road closed, no traffic.
3. Select Avoid in the pop-up menu. A new route is found that avoids the traffic jam. Avoiding a traffic jam using the map 1. On the map view, zoom in and select the traffic jam that is on your route. The traffic jam with an information panel is shown on the map. 2. Select the pop-up menu button. 3. Select Avoid. A new route is found that avoids the traffic jam. Selecting a faster route When a faster route is found, you are asked if you want to take the faster route.
As you approach an exit or junction, the lane you need is shown on the screen. Tip: To close the lane image, select anywhere on the screen. You can choose to see a split screen with the Guidance view on the left and lane guidance on the right or a full screen with only lane guidance. You can also switch off lane guidance. Go to Appearance in Settings to change the Highway exit previews setting. Time-dependent speed limits Some speed limits change depending on the time of day.
Quick search Choosing which search to use The following two types of search are available: Quick search Start typing your destination, place, or POI to immediately see a list of street names, places, and POIs that match. Step-by-step search Find your destination in easy steps. For an address, enter the city, then the street, then the house number. For a POI, enter where you want to search, then the type of POI you want to search for.
Using quick search About search QUICK SEARCH ONLY You use search to find a wide range of places and then navigate to them. You can search for the following: A specific address, for example, 335 Madison Avenue, New York. A partial address, for example, Madison Av NY. A type of place, for example, gas station or restaurant. A place by name, for example, Starbucks. A postal code, for example, 36925 York for York, Alabama. A city to navigate to a city center, for example, Kingston, NY.
3. Type of search button. You can search the whole of the current map, or you can search in a specific area, for example in a town or city, or near your destination. Select this button to change the type of search to any of the following: Whole map Select this option to search the whole of your current map with no limit to the search radius. Your current location is the center of the search. The results are ranked by exact match.
Working with search results QUICK SEARCH ONLY Your search results are shown in two columns. Address and city matches are shown in the left-hand column, and POIs, types of POIs and Places are shown in the right-hand column. Recent destinations and saved places are also shown in your search results. Tip: To see more results, hide the keyboard or scroll down the results list.
If you show the result on the map, you can use the pop-up menu to add the location to My Places. If a route is already planned, you can add the location to your current route. Note: The best search results are shown on the map. When you zoom in, the lower ranked search results are gradually shown. About postal codes You can search using a postal code to get closer to the area in which you want to find an address or POI.
Court house ATM Legal - Attorneys Bank Legal - other services Food services Convenience store Fast food restaurant Restaurant Chinese restaurant Accommodation Hotel or motel Luxury hotel Campground Economy chain hotel Emergency services Hospital or clinic Dentist Police station Veterinarian Doctor Fire station Car-related services Outside parking Gas station Parking garage Car wash Car dealer Vehicle inspection center 51
Rental car facility Electric/hybrid car charging point(s) Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication Company Community service Post office Pharmacy Shopping center Beauty services Tourist information office Shop College or university School Library Convention center Casino Winery Theater Tourist attraction Movie Theater Zoo Education Leisure 52
Concert hall Amusement park Museum Exhibition center Opera Cultural center Nightlife Leisure center Children's Farm Sport Sports Park Swimming pool Mountain peak Water sports Beach Tennis court Park or recreation area Ice skating rink Yacht basin or marina Sports center Stadium Golf course Church Place of worship Railroad station Mountain pass Religion Travel 53
Airport Scenic or panoramic view Ferry terminal Postal code Note: Not used in all countries.
Planning a route using quick search Using destination prediction What is destination prediction? Your TomTom GO SUPREME can learn your daily driving habits to saved favorite Places and it can also suggest destinations when you start the device from sleep mode, for example, when driving to Work in the morning. Getting ready for destination prediction Before you get your first suggested destination, your device needs some time to learn about your habits.
2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for an address, town, city, postal code or mapcode. Tip: To search for a specific city you can use the city's state code or postal code.
5. Select an address suggestion. 6. Enter the house number if you have one and haven't entered it already. Tip: If you enter a house number that is not found, then the number appears red. The nearest house number that is found is shown in the Drive button. You can enter a new house number, or you can select Drive/Ride to drive to the nearest house number. 7. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
Planning a route to a city center QUICK SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to a city center using search, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the city or town you want to plan a route to.
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: 5. Select the city in the left-hand column. The city name is shown in the right side of the search input box, and the city center POI is shown below in the right-hand column. 6. Select the city center POI. The city center location is shown on the map. 7. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
Note: When searching, the whole map is searched. If you want to change how the search is done, select the search type button and then select a search option. 4. As you type, suggestions based on what you have entered are shown in columns. You can continue typing or select a suggestion. Tip: To see more results, hide the keyboard or scroll down the results list. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: 5.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
The search results are shown in a column. Tip: To see more results, hide the keyboard or scroll down the results list. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: 4. Select an individual POI from the list. The location is shown on the map. 5. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu.
Tip: You can save a route using My Routes. Planning a route using the map Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using the map, do the following: 1. Move the map and zoom in until you can see the destination that you want to navigate to. Tip: You can also select a map symbol to open the pop-up menu, then select the Drive/Ride button to plan a route to that location. 2.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can use the location you selected in other ways, such as adding it to My Places, by selecting the pop-up menu button. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination.
A list of all your Places opens. 3. Select the Place you want to navigate to, for example Home. Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this destination, select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
Planning a route using coordinates QUICK SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using a pair of coordinates, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Select the type of search button to the right of the search box. 4. Select Latitude Longitude.
7. Select a suggestion for your destination. The location is shown on the map. 8. To plan a route to this destination, select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
A pop-up menu shows a list of options. 3. Select Remove Starting Point. Your route is replanned with your current location as the starting point. The original starting point is removed from your route. Changing the starting point into a stop 1. Select the starting point on the route in the map view. 2. Select the pop-up menu button. A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop.
2. Select Parking. The map opens showing the locations of parking lots. If a route is planned, the map shows parking lots near your destination. If a route isn't planned, the map shows parking lots near your current location. You can change the screen to show a list of parking lots by pressing this button: You can select a parking lot from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen.
If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a parking lot from the map or the list. A pop-up menu opens on the map showing the name of the parking lot. 4. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
1. Select the Main Menu button to open the Main Menu. 2. Select Gas Station. The map opens showing the locations of gas stations. If a route is planned, the map shows gas stations along your route. If a route isn't planned, the map shows gas stations near your current location. You can change the screen to show a list of gas stations by pressing this button: You can select a gas station from the list to locate it on the map.
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a gas station from the map or the list.
A pop-up menu opens on the map showing the name of the gas station. 4. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a gas station as a stop on your route by using the pop-up menu. A gas station that is a stop on your route has a blue icon.
Statistics for your current trip To see statistics for the trip you are driving now, select the Since --/--/-- tab. Tip: Traffic avoided tells you how much time you've saved by accepting faster routes when they are offered. To start a new trip, select the Clear trip button, just like resetting a mileometer in a car. After stopping your car, if you don't press the Clear trip button, the statistics just carry on incrementing when you start moving again.
Step by step search Choosing which search to use The following two types of search are available: Quick search Start typing your destination, place, or POI to immediately see a list of street names, places, and POIs that match. Step-by-step search Find your destination in easy steps. For an address, enter the city, then the street, then the house number. For a POI, enter where you want to search, then the type of POI you want to search for.
Entering search terms STEP-BY-STEP SEARCH ONLY Select Drive To in the Main Menu, then select Address or Point of Interest. The search screen shows the keyboard and the following buttons: 1. Back button Select this button to go back to the previous screen. 2. Search input box Enter your search term here. As you type, matching addresses or POIs are shown. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available.
Tip: Select the Shift key once to make the next letter you type upper case. Double tap the Shift key to use Caps-Lock where all the letters you type are upper case. Select the Shift key once to quit Caps-Lock. Tip: To cancel a search, select the map/guidance view button in the top right-hand corner of the screen. Working with search results STEP-BY-STEP SEARCH ONLY Your Address or Point of Interest search results are shown in a list.
When you show the address or POI on the map, you can use the pop-up menu to add the location to My Places. If a route is already planned, you can add the location to your current route. Note: The best search results are shown on the map. When you zoom in, the lower ranked search results are gradually shown. About postal codes You can search using a postal code to get closer to the area in which you want to find an address or POI.
Restaurant Chinese restaurant Accommodation Hotel or motel Luxury hotel Campground Economy chain hotel Emergency services Hospital or clinic Dentist Police station Veterinarian Doctor Fire station Car-related services Outside parking Gas station Parking garage Car wash Car dealer Vehicle inspection center Rental car facility Electric/hybrid car charging point(s) Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication 81
Company Community service Post office Pharmacy Shopping center Beauty services Tourist information office Shop College or university School Library Convention center Casino Winery Theater Tourist attraction Movie Theater Zoo Concert hall Amusement park Museum Exhibition center Opera Cultural center Nightlife Leisure center Education Leisure 82
Children's Farm Sport Sports Park Swimming pool Mountain peak Water sports Beach Tennis court Park or recreation area Ice skating rink Yacht basin or marina Sports center Stadium Golf course Church Place of worship Railroad station Mountain pass Airport Scenic or panoramic view Ferry terminal Postal code Religion Travel Note: Not used in all countries.
Bus station City center Toll plaza Electric/hybrid car charging stations Rest area Truck stop Planning a route using step-by-step search Using destination prediction What is destination prediction? Your TomTom GO SUPREME can learn your daily driving habits to saved favorite Places and it can also suggest destinations when you start the device from sleep mode, for example, when driving to Work in the morning.
Planning a route to an address STEP-BY-STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to an address, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Drive To. 3. Select Address. You can change the country or state setting by selecting the flag before you select a city. 4. Enter the town or city name, or the postal code.
6. Enter the house number. Tip: If the house number does not exist then it appears red. The nearest house number is then shown in the Drive to button. 7. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
When the correct city or town appears in the list, select the name. 5. Select the city center POI. 6. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route to a POI STEP-BY-STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to a POI type or a specific POI using search, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Drive To. 3. Select Point of Interest.
6. Select a POI type or an individual POI. If you selected a POI type, select a POI. The location is shown on the map. 7. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address, and email. 8. To plan a route to this destination, select Drive/Ride, depending on which device you are using.
The search results are shown in a list. 2. Scroll to the bottom of the list and select Search Places Online. 3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more.
4. Select an individual POI from the list. The location is shown on the map. 5. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address, and email. 6. To plan a route to this destination, select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
Tip: You can also select a map symbol to open the pop-up menu, then select the Drive/Ride button to plan a route to that location. 2. When you have found your destination on the map, select it by pressing and holding the screen for about one second. A pop-up menu shows the nearest address. 3. To plan a route to this destination, select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
Tip: You can save a route using My Routes. Planning a route using My Places To navigate to one of My Places from your current location, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select My Places. A list of all your Places opens. 3. Select the Place you want to navigate to, for example Home.
Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this destination, select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
N 40.77000 W -73.96855 40.77000 -73.96855 Tip: For decimal values you don't have to use a letter to indicate the latitude and longitude. For locations west of the 0 meridian and locations south of the equator, use a minus sign (-) before the coordinate. Degrees, minutes and seconds, for example: N 40°43′53″ W 73°59′49″ GPS standard coordinates, for example: N 40.77000 W -73.96855 Note: The bar below the coordinates turns red if you enter coordinates that are not recognized by your TomTom GO SUPREME.
A pop-up menu shows a list of options. 4. 5. 6. 7. Select Use as Starting Point. Search for the location you want to use as your destination. Select Show on Map. Select Drive/Ride in the pop-up menu. Your route is planned using your chosen starting point and destination. The estimated trip time is shown at the top of the route bar. Tip: Stops, POIs, and Places can all be selected as starting points using their pop-up menus. Tip: You can save the route in My Routes. 8.
A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop. Finding a parking lot Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a parking lot, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Parking. The map opens showing the locations of parking lots.
If a route is planned, the map shows parking lots near your destination. If a route isn't planned, the map shows parking lots near your current location. You can change the screen to show a list of parking lots by pressing this button: You can select a parking lot from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box.
A pop-up menu opens on the map showing the name of the parking lot. 4. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a parking lot as a stop on your route by using the pop-up menu.
The map opens showing the locations of gas stations. If a route is planned, the map shows gas stations along your route. If a route isn't planned, the map shows gas stations near your current location. You can change the screen to show a list of gas stations by pressing this button: You can select a gas station from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen.
If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a gas station from the map or the list. A pop-up menu opens on the map showing the name of the gas station. 4. Select Drive/Ride, depending on which device you are using. A route is planned and then guidance to your destination begins.
Select one of the three tabs to see statistics for today's driving, for your current trip and for all time. Tip: All-Time are the statistics that have been collected since the device was purchased and first switched on. Tip: A dot is included in large distances, for example, 20047,64 kilometers is shown as 20.047,6 km. Statistics for your current trip To see statistics for the trip you are driving now, select the Since --/--/-- tab.
Changing your route The Current Route menu When you have planned a route or track, select the Current Route or Current Track button in the Main Menu to open the Current Route or Current Track Menu. The following buttons are available in the menu: Clear Route / Clear Track Skip Next Stop Find Alternative Select this button to clear the currently planned route or track. The Current Route Menu closes and you return to the map view. Select this button to skip the next stop on your route.
Show Instructions Select this button to see a list of turn-by-turn text instructions for your planned route. The instructions include the following: Your current location. Street names. Up to two road numbers shown in road signs whenever available. An instruction arrow. An instruction description. The distance between two consecutive instructions. Exit number. The full addresses of stops on your route. Tip: Select an instruction to see a preview of that section of the route in the map view.
Drive to Route or Track Select Drive to Route to plan a route from your current location to the starting point of a My Route. The starting point is converted to a stop. Drive to Track plans a route to the nearest point of the track from your current position. Drive to Starting Point Share Track On the Current Track menu, select this button to plan a route to the starting point of the track. The starting point is converted to a stop. For more information, see Navigating using a track.
Avoiding part of a route If part of a road is blocked or you wish to avoid part of a route, you can select a specific section of a route to avoid. 1. Select the Main Menu button to open the Main Menu. 2. Select Current Route. 3. Select Avoid Part of Route. A screen opens showing a list of the sections that comprise your current route. 4. Select the section of the route that you want to avoid. A preview shows you the section you have chosen on the map. 5. Select Avoid.
Tip: Information from the TomTom Traffic is used when calculating alternative routes. Any route that is 50% longer in time than the original route is not shown. 5. Select your chosen route by tapping on the time balloon. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Note: There are two other ways of finding alternative routes: 1. Select Current Route in the Main Menu, followed by Find Alternative. 2.
If you choose to avoid a route feature, a new route is planned. In Route Planning in the Settings Menu, you can set how each route feature is handled when a new route is planned. To avoid a feature on your route, do the following. 1. Select the Main Menu button to open the Main Menu. 2. Select Current Route. 3. Select Avoid toll roads and More. A screen opens showing a list of the features you can avoid. The features found on your route are highlighted. 4. Select the feature that you want to avoid. 5.
Zoom in on the map, then press and hold to select a location. In the pop-up menu, select Add. Select Search and search for a location. When you have found a location, select Add. Your route is recalculated to include your stop. Adding a stop to your route using the map 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. Zoom in on the map, then press and hold to select a location. 3. Select the pop-up menu button. 4. Select Use in Route. 5.
My Routes About My Routes My Routes provides an easy way to save and retrieve routes and tracks. You may want to use My Routes in one or more of the following situations: While working - Your job involves driving several routes with multiple stops on a daily basis. Your routes can change and you need to be flexible and be able to change the order of your stops or change the planned route. While on vacation - You are going on vacation and want to plan and save a route.
3. Start driving to your destination using your device. 4. Park and switch off your device. The TomTom MyDrive app marks the spot where you have parked your car as a POI. Important: If you are closer than 250 m to or more than 2 km away from your final destination, a walking route isn't automatically generated. If you know in advance that your car is parked closer than 250 m to or more than 2 km away from your final destination, you can manually save your car position as a POI or favorite.
The TomTom MyDrive app guides you to your destination using a walking route. Note: A walking route is available to get you to your final destination if you are within 2 km of the final destination. If you are closer than 250 m to or more than 2 km away from your final destination, a walking route isn't automatically generated. Find My Car Note: To use this feature, you need an internet connection and a valid TomTom MyDrive account.
2. Select Walk here.
The TomTom MyDrive app guides you back to your car using a walking route. 3. When you reach your car, switch on your TomTom GO SUPREME to navigate home using a driving route. Tip: Alternatively you can plan a route to the My Car POI that you manually saved in MyPlaces. Note: A walking route is available to get you to your final destination if you are within 2 km of the final destination.
The route appears with the pop-up menu open. 5. Select Save in the pop-up menu. 6. Enter a name for the route, then select Done. 7. If you already logged into TomTom MyDrive, your route is synced to your account and you are also prompted to add a photo and description of the trip before publishing it to the TomTom MyDrive community. Switching off route recording To switch off route recording, do the following: 1. In the Main Menu, select Settings. 2. Select System. 3.
ITN files (TomTom's own Itinerary file format) An ITN file contains less detail than a GPX file. An ITN file can contain a maximum of 255 locations which is enough to recreate a route accurately. ITN files become routes after import. Using ITN files There are several things you can do with your ITN file: You can import an ITN file onto your TomTom GO SUPREME so you can travel that same route again and get navigation instructions. Use TomTom MyDrive to view your route. Saving a route 1.
The route is shown on the map view. 3. To navigate to the start of the saved route, select Drive/Ride depending on which device you are using. The starting point of the saved route is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route.
The route is shown on the map view. 3. Select the stop that you want to use as your starting point, then select the pop-up menu button to open the menu. 4. Select Start Route From Here. Your route is calculated from the new starting point. 5. Select Drive/Ride.
The starting point of your route is converted to your first stop and then the route is planned from your current location. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Change to a Stop. Alternatively, select Drive to Route or Ride to Route in the Current Route menu.
Tip: To update the saved route in your My Routes list with the changes, select the route on the map, then select Save Changes to Route in the pop-up menu. Recording a track You can record a track while you drive, with or without a route planned. After recording, you can then export your track so that you can share it with others. Alternatively, you view it using TomTom MyDrive if you’re logged in to TomTom MyDrive on your device. To record a track, do the following: 1.
3. Select the track, then select the pop-up menu. 4. Select Drive to Starting Point. The starting point of the track is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Note: You see two different colors on the map for your route and track. You see one color for the route from your current location to the starting point and another second color for the track.
Tip: To select or deselect all routes for export, select the pop-up menu button. 4. Select Share then select Export to Memory Card. You see the message Saving. Tip: If there is not enough space on your memory card or your card is not formatted correctly, you get on-screen help to fix the problem. 5. When you see a message that your tracks have been exported successfully, remove your memory card to share your tracks with other users.
Voice control (Speak & Go) About voice control Note: Voice control is not supported on all devices or in all languages. If your device has voice control capability, you will see a Voice Control button in the main menu: Instead of selecting items on the screen to control your TomTom GO SUPREME, you can use your voice to control your TomTom GO SUPREME. You can use voice control to control many of the navigation features on your TomTom GO SUPREME, or to change settings.
2. Select Change the wake-up phrase. 3. Enter your wake-up phrase using the keyboard. Your phrase should have at least three syllables. Don't use a phrase that you often say or hear. The indicator shows how good your phrase is: Red means your phrase won't work. Orange means your phrase might work. Green means your phrase is good. 4. Select Hear it to listen to your wake-up phrase. 5. Select Done then Yes to save your wake-up phrase. Your new wake-up phrase is ready to use.
This symbol shows you that voice control is busy. 4. The microphone monitor. While you are speaking the microphone monitor shows how well voice control can hear your voice: A light blue bar means voice control can hear your voice. A red bar means your voice is too loud for voice control to recognize individual words. A dark blue bar means your voice is too quiet for voice control to recognize individual words.
"Mute", and "Sound on" "Instructions on", and "Instructions off" "Day colors", and "Night colors" "2D view", and "3D view" "Zoom in", and "Zoom out" Saying commands in different ways Your TomTom GO SUPREME recognizes many more words than just the ones you see in the list of commands, so try some of your own words.
Tip: Your TomTom GO SUPREME recognizes places and street names when they are spoken in the local language using local pronunciation. You cannot enter postal codes using voice control. Going home using voice control The following example shows how to use voice control to plan a trip to your home location: 1. In map view or guidance view, say the wake-up phrase to start voice control. The voice control screen is shown and your TomTom GO SUPREME says "I'm listening.
1. In the map view, say the wake-up phrase to start voice control. The voice control screen is shown and your TomTom GO SUPREME says "I'm listening." When voice control is ready to listen, you see a microphone icon in the bottom left corner and you hear a beep. 2. Say the command "Volume 50%." Tip: Say "All commands" to see a list of commands you can say. Alternatively, select Help in the Main menu, then select Voice control and then select Which commands can I say?.
Map Share About Map Share You can report map changes using Map Share. These map changes are then shared with other TomTom device users when they receive a map update. There are two ways to report a map change: Select a location on the map and create the change report immediately. Mark a location and create the change report later. Your map change reports are sent to TomTom in real time when your TomTom GO SUPREME has an internet connection. All map changes are verified by TomTom.
Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 5. Follow the instructions for your chosen type of map change. 6. Select Report. Your map change report is sent to TomTom in real time. Note: All map changes are verified by TomTom. These verified changes are then available as part of the next map update.
6. Select the type of map change you want to apply. Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 7. Follow the instructions for your chosen type of map change. 8. Select Report. The marker for the marked location is removed from the map. Your map change report is sent to TomTom. Types of map change Road Restriction Select this option to block or unblock a road.
3. 4. 5. 6. Select Report Map Error from the pop-up menu. Select Street Name. Enter the correct street name. Select Report. Turn Restriction Select this option to report incorrect road turn restrictions. 1. 2. 3. 4. 5. 6. Press and hold to select the location of the map change on the map view. Select the pop-up menu button to open the menu. Select Report Map Error from the pop-up menu. Select Turn Restriction. If the incorrect intersection is shown, choose Select another intersection.
Safety Cameras About TomTom safety cameras The TomTom Safety Cameras service warns you about the following camera locations: Fixed safety camera locations. Speed trap locations. Speed trap hotspots. Average speed camera locations. Speed enforcement zones. Red light camera locations. Traffic restriction cameras. The Safety Cameras service also warns you about the following hazards: Accident hotspot locations.
Symbol shown on map Symbol shown in route bar Description Safety camera - this type of camera checks the speed of passing vehicles and is fixed in one place. Speed trap - this type of camera checks the speed of passing vehicles and can be moved to different locations. Speed trap hotspots - this type of warning shows places where speed traps are often used. Average speed safety cameras - these types of cameras measure your average speed between two points.
Changing the way you are warned To change the way you are warned about safety cameras, select Sounds & Warnings in the Settings menu. You can then set how you want to be warned for the different types of cameras and hazards. You can choose to be warned, warned only if you are speeding, or never warned. To switch off all warnings, switch off Safety cameras & hazards. Reporting a new safety camera If you pass a new safety camera that you were not warned about, you can report it instantly.
Confirm or remove a speed trap You can confirm the presence of a speed trap or remove a speed trap if it is no longer present. Just after you pass a speed trap, in the route bar you are asked if the camera was still there. Select Yes if the speed trap is still there. Select No if the speed trap has been removed. Your selection is sent to TomTom. We collect reports from many users to determine if the camera warning should be kept or removed.
Danger Zones About danger zones and risk zones The TomTom Danger Zones service warns you about danger zones and risk zones on your route when you are in France. Since January 3, 2012 it has been illegal to receive warnings about the positions of fixed safety cameras and speed traps when you are driving in France. For compliance with this change in French law, safety camera locations are no longer reported but instead areas of danger are indicated as danger zones and risk zones.
Your distance to the start of the zone is shown in the route bar. The speed limit in the zone is shown in the route bar. You hear a warning sound as you get near the start of the zone. While you are approaching a zone or driving in a zone, your speed is monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange.
Tip: If you make a mistake when reporting a camera, select Cancel in the message. Using the quick menu to report a risk zone 1. Select the current location symbol or the speed panel in the guidance view. 2. Select Report Risk Zone from the pop-up menu. You see a message thanking you for adding the risk zone. Tip: If you make a mistake when reporting a risk zone, select Cancel in the message. Using the Main Menu to report a risk zone 1. Select the Main Menu button to open the Main Menu. 2.
My Places About My Places My Places provides an easy way to select a location without the need to search for the location each time. You can use My Places to create a collection of useful or favorite addresses. Tip: The terms "favorite" and "place" mean the same thing - favorites are places that you go to often. The following items are always in My Places: Home - Your home location can be your home address or somewhere you often visit. This feature provides an easy way to navigate there.
Select the Search button and search for a location. Select a location to set as home or work, then select Set. Setting your home or work location using the map 1. In the Map View, move the map and zoom in until you can see your home or work location. 2. Press and hold to select the location. A pop-up menu shows the nearest address. 1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home" or "Work".
2. In the name bar, enter the name "Home". Note: "Home" must have a capital letter H. 3. Select Add. Your home location is changed to the new location. Adding a location from My Places 1. In the Main Menu, select My Places. 2. Select Add a new place. 3. To select a location, do one of the following: Zoom in on the map at the location you want to select. Press and hold to select the location, then select the add location symbol. Search for a location.
The location you added is shown with a marker on the map. Adding a location to My Places using search 1. Search for a location. 2. Select the location then select Show on map. 3. When the map view shows the location, select the pop-up menu button. 4. Select Add to My Places. The name of the location appears in the edit screen. 5. Edit the name of the location so you can easily recognize it. 6. Select Done to save your location in the My Places list.
Using community POI lists You can find collections of community POIs on the Internet and use them by saving them to a supported SD card that you insert in the device. A POI collection might contain, for example, campsites or restaurants for the area you are traveling in, and provides an easy way to select a location without the need to search for the location each time. Tip: Some TomTom Navigation devices have POI lists pre-installed. Your TomTom GO SUPREME uses .OV2 files for POI collections. Using an .
Your POI list locations have been removed from the map.
Hands-free calling About hands-free calling Important: Getting distracted while driving is dangerous. To use this feature, you must use a legally approved hands-free calling system and connect your device to your phone. Keep your eyes on the road and avoid hands-on interaction with your device while driving. You can make calls and receive incoming calls hands-free using your TomTom GO SUPREME. You can use your voice or a combination of voice and touch to use hands-free calling.
Ending or rejecting an incoming call 1. When someone calls you, you see their name if they are in your contact list and a message saying Incoming call. 2. Say "No" or, alternatively, select the Incoming call message to see the following options: Send SMS (Android only) Reject Answer You can then select Reject. Note: Deleting the Incoming call message by swiping left or right rejects the call and doesn't record it as a missed call.
2. Select the Contacts button. You see the Contacts screen with your call history and frequent contacts. 3. Select a contact from either tab to make a call to that person. You can also search for a contact. Searching your contacts To search for a contact and then call them, do the following: 1. Select the search field at the top of the Contacts screen and start typing. 2. When your contact appears, select the name. 3. Select the call button to make the call.
1. Select the Main Menu button to open the Main Menu. 2. Select the message button in the lower right-hand corner of the screen. You see the message Message notifications OFF. Messages are switched off for the current session. When you switch off your device or put it in sleep mode, message notifications are reset to come on again for your next session.
Sending your location and ETA If you are late or, for example, stuck in a horrible traffic jam, wouldn't it be useful to let your family or co-workers know about it? Sending location and ETA lets you do just that. Before you start driving you set up a short list of contacts, and then, when driving, you can send an SMS to your chosen contacts about your current location, destination, and estimated time of arrival (ETA). Important: Getting distracted while driving is dangerous.
Settings Appearance Select Settings in the Main Menu, then select Appearance. On this screen, you can change these settings: Display Select Display to change the appearance of the display. Route bar Select Route bar to change the information you see in the route bar. Show POI lists on map Select Show POI lists on map to choose which POI lists you want to show on the map. Note: Show POI lists on map is not available on all TomTom navigation devices or apps.
Brightness Select Brightness to change the following settings: Day brightness Move the slider to adjust the brightness level of the screen during the day. Night brightness Move the slider to adjust the brightness level of the screen during the night. Select Switch to night colors when dark to automatically switch to night colors when it gets dark. Size of text and buttons Select Size of text and buttons to change the size of the text and the buttons you see on the screen.
When the wide route bar is shown, you see more information about your route. For example, you see time and distance to traffic and more. Guidance view In Guidance view you can change these settings: Show current street name This setting displays name of the street you are driving along. Guidance view style Select this setting to choose from 3D or 2D versions of the guidance view. Both the 2D and 3D guidance views move in your direction of travel.
A split screen is shown with the Guidance view on the left and lane guidance on the right. Show preview only Only lane guidance is shown. Off Only the Guidance view is shown. Route Planning Select Settings in the Main Menu, then select Route Planning. Suggest destinations When no route is planned, your device can learn your daily driving habits to saved favorite Places and also predict destinations when you start the device from sleep mode, for example driving to Work in the morning.
Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV) and are not present in every country. To travel on these lanes, you may need to have more than one person in the car, for example, or the car may need to use environmentally-friendly fuel. Bluetooth Tip: To access settings and the status of your services quickly, select the menu bar at the top of the main menu. In portrait mode, you can also tap the icons down the right-hand side.
Network security Depending on the type of Wi-Fi network, you may see just password, proxy, and IP settings. A more secure network, however, has extra security settings such as: Network name or SSID. EAP method, for example, PEAP, TLS, TTLs, etc. Phase 2 authentication, for example, PAP, MSCHAP, etc. CA certificate Identity Important: These are advanced Wi-Fi network security options, so unless you fully understand what you are doing, please don't use these options.
Choose another map Select Choose another map to change the map that you are using. You can choose from maps stored either in internal memory or on a memory card if your TomTom GO SUPREME has a memory card slot. Important: Routes and tracks cannot be stored on the same memory card as maps because different memory card formatting is used. Note: Although you can store more than one map on your TomTom GO SUPREME, you can only use one map at a time for planning and navigation.
Warnings You can set how you want to be warned for different types of cameras, danger zones, and hazards. You can choose to be always warned, warned only if you are speeding, or never warned. Safety Cameras & hazards You can choose to switch off all safety camera, danger zone, and hazard warnings. When Safety Cameras & hazards is switched on, you can switch off the warnings for each type of safety camera, danger zone, and hazard.
Use this setting to control whether road sign information is read out loud as part of navigation instructions. For example, "Turn left onto A302 Bridge Street towards Islington." Read street names out loud Use this setting to control whether street names are read out loud as part of navigation instructions. For example, when street names are read out loud, you hear "Turn left Graham Road towards Hackney.
Select Settings in the Main Menu, then select MyDrive. If your device is not an always-connected device, you can connect your device to the internet in the following ways: Connect to your phone's internet using Bluetooth Connect to a Wi-Fi network Connect using TomTom MyDrive Connect If you are already connected to the internet, you are asked to log into your TomTom account. If you are already logged in and wish to stop your device syncing with TomTom MyDrive, you see a Stop Syncing button.
System Select Settings in the Main Menu, then select System. On this screen, you can change these settings: Automatic route recording Select this setting to switch route recording on or off. When route recording is on, any routes driven are automatically added to your Route History. Switch this setting off to stop route recording. The default is off. About This screen shows you all sorts of useful information about your model of TomTom device.
Use my location and the information I enter to receive TomTom services If you agree, you can use the following features if they are supported by your device: TomTom MyDrive Traffic Download safety camera locations Quick Search Send safety camera reports Keep trip history on this device for optional features If you agree, your device suggests destinations if the feature is supported by your device. If you disagree at a later time, your historical route information is removed.
Getting Help Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information: Device name and model About This screen shows you all sorts of useful information about your model of TomTom device. This information is useful during calls to Customer Support and when renewing subscriptions using the TomTom web shop.
Product certification Finding product certification information on your device To find product certification information, such as the ICASA-approved certification number, do the following on your TomTom GO SUPREME: 1. Select Settings in the Main Menu. 2. Select System. 3. 4. 5. 6. Select About. Select Legal information. Select Certificates. You then see the relevant product certification information for your TomTom GO SUPREME, for example, ICASA.
UsingTomTom MyDrive Connect About TomTom MyDrive Connect The quickest and easiest way to keep your TomTom GO SUPREME up-to-date is to use a Wi-Fi connection. If you are unable to connect to the internet using Wi-Fi or you prefer to use a different method, you can connect to the internet using a USB connection to a computer. To connect your TomTom GO SUPREME to the internet, TomTom MyDrive Connect must be installed on the computer. Note: You cannot use TomTom MyDrive Connect to manage your device.
4. Install your updates and new items on your TomTom GO SUPREME.
TomTom account To download content and to use TomTom services, you need a TomTom account. You can create an account using your computer in one of the following ways: On the device itself during the first time you use it or by selecting the MyDrive button. By selecting the Create account button at tomtom.com. By selecting the green MyTomTom button at tomtom.com. By going to tomtom.com/getstarted. Important: Take care when choosing a country during account creation.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy.
Pacemakers Pacemaker manufacturers recommend that a minimum of 15 cm/6 inches be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Guidelines for people with pacemakers: You should ALWAYS keep the device more than 15 cm/6 inches from your pacemaker. You should not carry the device in a breast pocket.
Avoid dropping the device. If the device is dropped and you suspect damage, please contact customer support. Use the device only with the chargers, mounts, or USB cables provided. For TomTom approved replacements, go to tomtom.com. Operating temperature This device will remain fully operational within the temperature range 32°F (0°C) to 113°F (45°C). Prolonged exposure to higher or lower temperatures can cause damage to your device and is therefore advised against.
WEEE e-Waste Disposal This product is marked with the crossed-out wheelie-bin symbol on its body and/or packaging to show that it shall not be treated as household waste or be disposed of as unsorted municipal waste. Please dispose of this product by making use of local e-waste collection point or other recycling facility or by returning it to the point of sale. More information about national recycling options can be requested from the responsible local authority in your country.
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cables and connectors to reduce the possibility of causing radio and television interference.
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B) The Country Code Selection feature is disabled for products marketed in the US or Canada. Equipment is certified to the requirements of RSS-247 for 2.4 GHz. Informations relatives aux émissions au Canada Son fonctionnement est soumis aux deux conditions suivantes: Cet appareil ne doit pas creér d'interférences nuisibles.
Responsible Party in North America TomTom, Inc., 2400 District Avenue, Burlington, MA 01803, Tel: 866 486-6866 option 1 (1-866-4-TomTom) Terms and Conditions: Limited warranty and EULA Our terms and conditions, including our limited warranty and end user license terms, apply to this product. Visit tomtom.com/legal. This Document Great care was taken in preparing this document. Constant product development may mean that some information is not entirely up to date.
Copyright notices © 1992 - 2019 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. The software included in this product contains copyrighted software that is licensed under the GPL. A copy of that licence can be viewed in the Licence section. You can obtain the complete corresponding source code from us for a period of three years after our last shipment of this product. For more information, visit tomtom.
