TomTom TRUCKER Reference Guide
Contents Welcome to navigation with TomTom 6 Get going 7 Installing in your car .............................................................................................. 7 Positioning the device ............................................................................................ 7 Switching on and off .............................................................................................. 7 Safety Notice .................................................................................
Syncing TomTom MyDrive 30 About TomTom MyDrive ........................................................................................ 30 Logging in to your MyDrive account .......................................................................... 30 Showing a planned destination in MyDrive .................................................................. 30 Finding and syncing locations using MyDrive ................................................................
Voice control (Speak&Go) 71 About voice control.............................................................................................. 71 Starting voice control ........................................................................................... 71 Making your own wake-up phrase ............................................................................. 71 The voice control screen .......................................................................................
Guidance view ................................................................................................ 94 Automatic Zoom.............................................................................................. 94 Voices .............................................................................................................. 95 Voice Control ..................................................................................................... 95 Maps .........................................
Welcome to navigation with TomTom This Reference Guide explains all you need to know about your new TomTom TRUCKER. If you want a quick read of the essentials, we recommend that you read the Get going chapter. This covers installation, switching on, setting up and planning your first route. After that, you will probably want to connect to TomTom services and you can read all about that in the Connecting to TomTom services chapter.
Get going Installing in your car Use the supplied mount to install your TomTom TRUCKER in your vehicle. Read the instructions about positioning your device before you install your TRUCKER. To install your TRUCKER, do the following: 1. Connect the supplied USB cable to the mount. If the mount is integrated into your TRUCKER, connect the USB cable to the device. Note: Use ONLY the USB cable supplied with your TRUCKER. Other USB cables may not work. 2.
You can also press the On/Off button for more than 2 seconds until you see the Sleep and Turn Off buttons. Select Sleep to make the device sleep. Tip: To send your navigation device to sleep when the USB cable is unplugged or whenever it is removed from the mount, go to Battery settings in the Settings menu.
Note: If you choose not to send location information to us, you will no longer receive our services. This is because services need to send the location of your device to TomTom in order to receive the traffic information related to where you are. The end date of your subscription remains the same, even if you do not send this information to us. Additional information If you think that your information is not being used for the purpose for which you have provided it to TomTom, contact us at tomtom.
Connecting to TomTom services About TomTom services TomTom services give you real-time information about traffic and speed cameras on your route. To get TomTom services on your TRUCKER you need to be logged in to a MyTomTom account and have active subscriptions to TomTom Traffic and TomTom Speed Cameras. Your TRUCKER has a permanent connection directly to TomTom services. These navigation devices are called 'Always Connected' devices. Check tomtom.com/connect for more information.
What's on the screen The map view The map view is shown when you have no planned route. Your actual location is shown as soon as your TRUCKER has found your GPS location. You can use map view in the same way as you might look at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons.
1. Back button. This button returns the map to an overview of your whole route or, if no route is planned, moves the map to put your current location at the centre. 2. Switch view button. Select the switch view button to change between the map view and the guidance view. When in map view, if you are driving, the small arrow rotates to show you your current driving direction, with north being up. 3. Zoom buttons. Select the zoom buttons to zoom in and out. 4. Current location.
When your TRUCKER starts after sleeping and you have a route planned, you are shown the guidance view with your current location. 1. Switch view button. Select the switch view button to change between the map view and the guidance view. 2. Zoom buttons. Select the zoom buttons to zoom in and out. Tip: On some devices you can also pinch to zoom in and out. 3. Instruction panel. This panel shows the following information: The direction of your next turn. The distance to your next turn.
7. Current location. This symbol shows your current location. Select the symbol or the speed panel to open the quick menu. Note: If your TRUCKER cannot find your location using GPS or other methods, the symbol appears grey. 8. Route bar. The route bar is shown when you have planned a route. Important: To see a wider route bar showing additional route information, change the setting for Route Information. The route bar The route bar is shown when you have planned a route.
the symbols. For a complete list of incident types, see Traffic incidents. The bottom of the route bar represents your current location and shows the distance to the next incident on your route. In addition, you can choose to see the current time if you switch the setting on. Note: To make the route bar more readable some incidents may not be shown. These incidents will always be of minor importance and only cause short delays.
Search Select this button to search for an address, a place or a Point of Interest, then plan a route to that location. Drive Home Select this button to drive to your home location. If this button is not included in your main menu, go to My Places to set up your home location. Drive to Work Select this button to drive to your work location. If this button is not included in your main menu, go to My Places to set up your work location.
My Routes Parking Select this button to show your saved routes. Select this button to find car parks. Petrol Station Select this button to find petrol stations. Voice Control Select this button to start voice control. Tip: You can also say the wake-up phrase to start voice control. TomTom Services Select this button to see the status of your connection to the internet. Other buttons On the map or guidance view, select the Main Menu button to open the Main Menu.
Select this button to return to the previous screen. Select this button to return to the map view or guidance view. This symbol shows the status of the Bluetooth connection when you use a smartphone to connect to TomTom services. This symbol shows the power level of the battery in your TRUCKER. This symbol shows that your TRUCKER is connected to TomTom services. This symbol shows that your TRUCKER is not connected to TomTom services.
This button shows that the display is using night colours. Select the button to increase the brightness of the screen and display the map in brighter colours. Volume control On the map or guidance view, select the Main Menu button to open the Main Menu. Select and slide the volume control to change the volume of voice instructions and warnings. If the voice instructions are switched off, the volume control will still change the volume of the warnings.
Tap or select Tap a single finger on the screen. Example of when to use this: Selecting an item in the Main Menu. Tip: To open a pop-up menu for an item on the map, select and hold the item until the menu opens. Changing the text and button size You can change the size of the text and the buttons you see on the screen, for example to make the text easier to read and the buttons easier to use. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen.
Traffic About TomTom Traffic TomTom Traffic is a unique TomTom service providing real-time traffic information. For more information about TomTom services, go to tomtom.com/services. In combination with IQ Routes, TomTom Traffic helps you plan the optimum route to your destination taking into account the current local traffic conditions and the weather. Your TomTom TRUCKER regularly receives information about the changing traffic conditions.
The arrival information panel shows the following information: The estimated time that you will arrive at your destination. The length of time to drive to the destination from your current location. A parking button is shown near the destination flag when parking is available near your destination. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
Tip: Select an incident on the map to see more detailed information. 1. Traffic incident that affects your route in your direction of travel. A symbol or number at the start of the incident shows the type of incident or the delay in minutes, for example 5 minutes. The colour of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate.
To get more information about an incident, select an incident in the route bar. The map opens zoomed in on the incident and a pop-up opens showing detailed information about the traffic incident. The information shown includes: The type of traffic incident - general, accident, road works, lane closure or weather such as heavy rain or snow. The severity of the incident - slow traffic, queuing traffic or stationary traffic. The delay time. The length of the incident.
Unknown incident Roadworks Lane closure Road closure Advanced Lane Guidance Note: Lane guidance is not available for all junctions or in all countries. Advanced Lane Guidance helps you prepare for motorway exits and junctions by showing the correct driving lane for your planned route. As you approach an exit or junction, the lane you need is shown on the screen and in the instruction panel. Tip: To close the lane image, select anywhere on the screen or press the back button.
Important: The speed limit shown in the speed panel is only an indication. You must always obey the actual speed limit for the road you are on and the conditions you are driving in.
Setting your vehicle type About My Vehicle Important: Route planning for a specific vehicle type is available only when a truck map is installed. If a truck map is not installed, a car route is planned instead. My Vehicle lets you choose the type of vehicle you are driving so that the route planned by your device is suitable for your vehicle. Each vehicle type has adjustable settings for dimensions, weight and maximum speed.
The My Vehicle screen is shown with the settings for the selected vehicle type. 3. Select each setting and enter the correct value for your vehicle type. If a setting will not be a route restriction, for example Maximum Speed, you can set it to zero. Tip: For Bus and Truck vehicle types, the dimensions, weight and maximum speed are pre-set. Adjust the settings to match your vehicle's actual specifications.
Important: You must pay attention to all traffic signs, especially those relating to your vehicle’s dimensions and weight. We cannot guarantee you will never encounter them on your route and ignoring such restrictions can be dangerous and illegal.
Syncing TomTom MyDrive About TomTom MyDrive TomTom MyDrive is the easy way to share locations and favourites, and save your personal navigation information. MyDrive synchronises your TomTom TRUCKER with your My Drive account. You can use MyDrive in a web browser on a computer or as a mobile app on a smartphone or tablet. Important: To use TomTom MyDrive you need a compatible navigation device. Use TomTom MyDrive to do the following: Sync community POI list files from the MyDrive map to your TRUCKER.
1. In a web browser or using the MyDrive app, log in to your MyDrive account. 2. On the map, select a destination. Tip: You can search for a destination or you can move the map and select a destination. You can also select a destination from your My Places list. 3. Click on the location, then open the pop-up menu and select Add to My Places. The location is shown in the Favourites list in the MyDrive My Places menu. 4. Log in to MyDrive on your TRUCKER.
Saving and restoring your personal navigation information When you are logged in to MyDrive on your TRUCKER, your personal navigation information is continuously and automatically saved to your MyDrive account. If you reset your TRUCKER, or log in to MyDrive on a different device, your saved personal navigation information is restored to your TRUCKER or the different device. The following personal navigation information is saved to your MyDrive account: MyDrive destinations.
Using Quick Search About search You use search to find a wide range of places and then navigate to them. You can search for the following: A specific address, for example, 123 Oxford Street, London. A partial address, for example, Oxford st Lon. A type of place, for example, petrol station or restaurant. A place by name, for example, Starbucks. A postcode, for example, W1D 1LL for Oxford Street, London. A city to navigate to a city centre, for example, London.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, the whole map is searched.
6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
The search results are shown in two columns. 2. Select Search Places Online. 3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction.
5. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 6. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
1. Back button. Select this button to go back to the previous screen. 2. Search input box. Enter your search term here. As you type, matching addresses and POIs are shown. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. Tip: To edit, select a word you have already typed to place the cursor. You can then insert or delete characters. 3. Type of search.
8. Show/hide keyboard. Select this button to show or hide the keyboard. Tip: Select the Shift key once to make the next letter you type upper case. Double tap the Shift key to use Caps-Lock where all the letters you type are upper case. Select the Shift key once to quit Caps-Lock. Tip: To cancel a search, select the map/guidance view button in the top right-hand corner of the screen. Working with search results Your search results are shown in two columns.
If you show the result on the map, you can use the pop-up menu to adding a location from My Places or search near this location. If a route is already planned, you can add the location to your current route. Note: The best search results are shown on the map. When you zoom in, the lower ranked search results are gradually shown. About postcodes When searching using a postcode, your results depend on the type of postcode used in the country that you are searching in.
Every location on Earth, including those in the sea like islands and oil rigs, can be represented by a mapcode. Mapcodes are short, and easy to recognise, remember and communicate. They are precise to a few metres, which is good enough for every-day use. Go to mapcode.com for instructions on how to find the mapcode for a location. Mapcodes are more precise and more flexible than the address on a business card.
Car-related services Outside parking Petrol station Parking garage Car wash Car dealer Vehicle inspection centre Rental car facility Electrical car charging point(s) Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication Company Community service Post office Pharmacy Shopping centre Beauty services Tourist information office Shop College or university School Library Convention centre Education Leisure 42
Casino Winery Theatre Tourist attraction Cinema Zoo Concert hall Amusement park Museum Exhibition centre Opera Cultural centre Nightlife Leisure centre Playing field Swimming pool Mountain peak Water sports Beach Tennis court Park or recreation area Ice skating rink Yacht basin or marina Sports centre Stadium Golf course Church Place of worship Sport Religion 43
Travel Railway station Mountain pass Airport Scenic or panoramic view Ferry terminal Postcode Note: Not used in all countries.
Planning a route Planning a route to an address using search Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to an address using search, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: 5. Select an address suggestion. 6. Enter the house number if you have one and haven't entered it already. Tip: If you enter a house number that is not found, then the number appears red. The nearest house number that is found is shown in the Drive button.
To plan a route to a city centre using search, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the city or town you want to plan a route to. You can search for a town, city, or postcode. Tip: To search for a specific city you can use the city's postcode or the country. For example, searching for Essen will return many results.
The city name is shown in the right side of the search input box, and the city centre POI is shown below in the right-hand column. 6. Select the city centre POI. The city centre location is shown on the map. 7. Select Drive. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction.
5. Select a POI type or an individual POI. If you selected a POI type, select a POI. The location is shown on the map. 6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins.
The search results are shown in two columns. 2. Select Search Places Online. 3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction.
5. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 6. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
2. When you have found your destination on the map, select it by pressing and holding the screen for about one second. A pop-up menu shows the nearest address. 3. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can use the location you selected in other ways, such as adding it to My Places, by selecting the pop-up menu button.
2. Select My Places. A list of all your Places opens. 3. Select the Place you want to navigate to, for example Home. Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this Place, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
Planning a route using coordinates Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using a pair of coordinates, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Select the type of search button to the right of the search box. 4. Select Latitude Longitude. 5. Type in your pair of coordinates.
8. To plan a route to this destination, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
1. Select the Main Menu button to open the Main Menu. 2. Select Search. 3. 4. 5. 6. The search screen opens with the keyboard showing. Use the keyboard to enter the name of the location you want to use as a starting point. Select an address or POI suggestion. Select Show on Map. Select the pop-up menu button. A pop-up menu shows a list of options. 7. Select Use as Starting Point. 8.
A pop-up menu shows a list of options. 3. Select Remove Starting Point. Your route is replanned with your current location as the starting point. Changing the starting point into a stop 1. Select the starting point on the route in the map view. 2. Select the pop-up menu button. A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop. Finding a car park To find a car park, do the following: 1.
The map opens showing the locations of car parks. If a route is planned, the map shows car parks near your destination. If a route isn't planned, the map shows car parks near your current location. You can change the screen to show a list of car parks by pressing this button: You can select a car park from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen.
A pop-up menu opens on the map showing the name of the car park. 4. To plan a route to your chosen car park, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a car park as a stop on your route by using the pop-up menu. Finding a petrol station To find a petrol station, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Petrol Station.
If a route is planned, the map shows petrol stations along your route. If a route isn't planned, the map shows petrol stations near your current location. You can change the screen to show a list of petrol stations by pressing this button: You can select a petrol station from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box.
4. To plan a route to your chosen petrol station, select the drive button: A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a petrol station as a stop on your route by using the pop-up menu. A petrol station that is a stop on your route has a blue icon.
Changing your route The Current Route Menu When you have planned a route or track, select the Current Route button in the Main Menu to open the Current Route Menu. The following buttons are available in the menu: Clear Route or Track Find Alternative Avoid Blocked Road Select this button to clear the currently planned route or track. The Current Route Menu closes and you return to the map view. You see this button when you have planned a route.
Add Stop to Route Select this button to add a stop to your currently planned route. You can also add a stop to your route directly from the map. Add to My Routes If you plan a new route that has not already been saved, you see this button. Select this button to save this route as part of your My Routes list. Save Changes to Route If you make a change to a My Route, you see this button. Select this button to save the changes.
2. Select Avoid Blocked Road. A new route is found that avoids the blocked road. You may get shown up to two alternatives depending on the road network between you and your destination. The new route is shown on the map view with the difference in travel time in a balloon. Note: It may not be possible to find an alternative route around the blocked road if none exists. 3. Select the new route by selecting the time balloon. 4. Select Let's go. Guidance to your destination resumes avoiding the blocked road.
Zoom in on the map, then press and hold to select a location. In the pop-up menu, select Add to Current Route. Select Search and search for a location. When you have found a location, select the Add Stop to Route button. Your route is recalculated to include your stop. Adding a stop to your route using the map 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. Zoom in on the map, then press and hold to select a location. 3. Select the pop-up menu button. 4.
My Routes About My Routes My Routes provides an easy way to create saved routes with optional stops, sometimes known as an itinerary. You can use My Routes to save, retrieve and edit routes. You may want to use My Routes in one or more of the following situations: While working - Your job involves driving several routes with multiple stops on a daily basis. Your routes can change and you need to be flexible and be able to change the order of your stops or change the planned route.
1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. To navigate to the start of the saved route, select Drive. The starting point of the saved route is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route.
3. Select the pop-menu button to open the menu. 4. Select Manage Stops. 5. Select Add Stop to Route. 6. Select your new stop on the map. Tip: If you know the name of your new stop, you can use Search to select your stop instead of using the map. 7. Select the Add Stop button to add this location as a stop. Your route is recalculated to include your stop. Tip: To update the saved route in your My Routes list with the changes, select the route om the map then select Save Changes to Route in the pop-up menu.
Voice control (Speak&Go) About voice control Note: Voice control is not supported on all devices or in all languages. Instead of selecting items on the screen to control your TomTom TRUCKER, you can use your voice to control your TRUCKER. You can use voice control to control many of the navigation features on your TRUCKER, or to change settings. For example, you can change the screen to day colours, avoid a blocked road or decrease the volume just by using your voice.
Orange means your phrase might work. Green means your phrase is good. 4. Select Hear it to listen to your wake-up phrase. 5. Select Done then Yes to save your wake-up phrase. Your new wake-up phrase is ready to use. Start Voice Control and try it. The voice control screen 1. Examples of what you can say. Tip: Say "All commands" to see a list of commands you can say. Alternatively, select Help in the Main menu, then select Voice control and then select Which commands can I say?. 2.
Some tips for using voice control You can help your TRUCKER understand what you are saying by following these tips: Mount your TRUCKER about an arm's length in front of you, away from speakers or air vents. Reduce background noise such as voices or the radio. If there is excessive road noise, you may need to speak in the direction of the microphone. Speak fluently and naturally as though speaking to a friend.
"Navigate to", "Look for" or "Nearest" instead of "Drive to" when you want to drive to a petrol station. "Cancel" or "Delete" instead of "Clear" when you want to clear your current route. Entering an address using voice control Note: If spoken address entry is not supported in your current country, voice control is stopped and the address entry screen is shown. You can enter the address in the normal way using the keyboard.
For some commands, your TRUCKER repeats what you say and asks for confirmation. 3. If the command is correct, say "Yes." If the command is incorrect, say "No" and repeat the command after you hear "I'm listening". Your device plans a route from your current location to your home location. Tip: To stop voice control, say "Cancel". To go back one step, say "Back". Going to a POI using voice control The following example shows how to use voice control to plan a journey to a petrol station: 1.
Map Share About Map Share You can report map corrections using Map Share. These map corrections are then shared with other TomTom users when they receive a map update. There are two ways to report a map correction: Select a location on the map and create the correction report immediately. Mark a location and create the correction report later. To send your map correction reports to TomTom, you must connect your TRUCKER to your computer and use MyDrive.
Note: If you want to report a map correction of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 5. Follow the instructions for your chosen type of map correction. 6. Select Report. 7. Connect your TRUCKER to MyDrive to send your map correction report to TomTom and receive map corrections from other TomTom users. Creating a map correction report from a marked location If you see a map error while you are driving, you can mark the location so you can report the error later.
6. Select the type of map correction you want to apply. Note: If you want to report a map correction of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 7. Follow the instructions for your chosen type of map correction. 8. Select Report. The marker for the marked location is removed from the map. 9. Connect your TRUCKER to MyDrive to send your map correction report to TomTom and receive map corrections from other TomTom users.
5. Enter the correct street name. 6. Select Report. Turn Restriction Select this option to report incorrect road turn restrictions. 1. 2. 3. 4. 5. 6. Press and hold to select the location of the map correction on the map view. Select the pop-up menu button to open the menu. Select Report Map Error from the pop-up menu. Select Turn Restriction. If the incorrect junction is shown, select Select another junction. Select the approach direction.
Speed Cameras About speed cameras The Speed Cameras service warns you about the following camera locations: Fixed speed camera locations. Mobile speed camera locations. Mobile speed camera hotspots. Average speed camera locations. Speed enforcement zones. Red light camera locations. Traffic restriction cameras. The Speed Cameras service also warns you about the following safety hazards: Accident blackspot locations. Traffic jams.
Symbol shown on map Symbol shown in route bar Description Fixed speed camera - this type of camera checks the speed of passing vehicles and is fixed in one place. Mobile speed camera - this type of camera checks the speed of passing vehicles and can be moved to different locations. Mobile speed camera hotspots - this type of warning shows places where mobile cameras are often used. Average speed cameras - these types of cameras measure your average speed between two points.
Changing the way you are warned To change the way you are warned about speed cameras, select the Sounds and Warnings button in the Settings menu. You can then set how you want to be warned for the different types of cameras and safety hazards. You can change settings for whether you want to be warned, never warned or warned only if you are speeding. For example, to change how you are warned when you approach a fixed speed camera, do the following: 1. 2. 3. 4.
2. Select Report Speed Camera. You see a message thanking you for adding the camera. Tip: If you make a mistake when reporting a camera, select Cancel in the message. The speed camera is saved on your TRUCKER automatically and also sent to other users. Confirm or remove a mobile speed camera You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no longer present. 1.
Danger Zones About danger zones and risk zones The Danger Zones service warns you about danger zones and risk zones on your route when you are in France. Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile speed cameras when you are driving in France. To be compliant with this change in French law, speed camera locations are no longer reported but instead areas of danger are indicated as danger zones and risk zones.
Danger zone and risk zone warnings Warnings are given 10 seconds before you reach a danger zone or risk zone. You are warned in several ways: A symbol is shown in the route bar and on your route on the map. Your distance to the start of the zone is shown in the route bar. You hear a warning sound as you get near the start of the zone. While you are approaching a zone or driving in a zone, your speed is monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red.
Reporting a risk zone If you pass a new temporary risk zone that you were not warned about, you can report it instantly. Note: To report a risk zone, you must be connected to TomTom services and logged in to your MyTomTom account. If a new temporary risk zone is reported directly before or after an existing risk or danger zone, then the new zone is added to the existing zone. If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be available for all subscribers.
My Places About My Places My Places provides an easy way to select a location without the need to search for the location each time. You can use My Places to create a collection of useful or favourite addresses. Tip: The terms "favourite" and "place" mean the same thing - favourites are places that you go to often. The following items are always in My Places: Home - Your home location can be your home address or somewhere you often visit. This feature provides an easy way to navigate there.
Zoom in on the map at the location you want to select. Press and hold to select the location, then select the home or work location symbol. Select the Search button and search for a location. Select a location to set as home or work. Select Set home location or Set work location. Setting your home or work location using the map 1. In the Map View, move the map and zoom in until you can see your home or work location. 2. Select the location by pressing and holding the screen for about one second.
1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home". Note: "Home" must have a capital letter H. 3. Select Add. Your home location is changed to the new location. Adding a location from My Places 1. In the Main Menu, select My Places. 2. Select Add a new place. 3. To select a location, do one of the following: Zoom in on the map at the location you want to select. Press and hold to select the location, then select the add location symbol. Search for a location.
Adding a location to My Places using search 1. 2. 3. 4. In the Main Menu, select Search. Search for a location. Select the location then select Show on map. When the map view shows the location, select the pop-up menu button. 5. Select Add to My Places. The name of the location appears in the edit screen. 6. Edit the name of the location so you can easily recognise it. 7. Select Done to save your location in the My Places list.
Settings My Vehicle Important: Route planning for a specific vehicle type is available only when a truck map is installed. If a truck map is not installed, a car route is planned instead. Select Settings in the Main Menu, then select My Vehicle. On this screen, you can set your vehicle type and dimensions. Routes planned by your device avoid restrictions for the vehicle type, and take into account the vehicle's specifications. Vehicle Type Select this setting to choose your vehicle type.
Select Route bar to change the information you see in the route bar. Guidance view Select Guidance view to change the information you see in the guidance view. Automatic zoom Select Automatic Zoom to change how you view a junction as you drive. Automatic map view switching By default, automatic changing of views is on. This means, for example, that your TRUCKER shows the map view when an alternative route is being suggested, along with several other sets of circumstances.
Select Route information to change the route information you see on the route bar. Show current time Select this setting to show the current time in the guidance view. When switched on, the current time is shown at the bottom of the route bar. Show wide route bar if possible The wide route bar is not shown by default. You can select this setting to switch on the wide route bar in the guidance view. Note: The wide route bar can only be shown if the screen is wide enough.
Tip: To find out where the different panels are in the guidance view or map view, see What's on the screen. Route Information You can choose to see any of the following in the route bar: Parking Select this setting Petrol stations Select this setting Stops Select this setting Rest areas Select this setting to see car parks and parking. to see petrol stations on your route. to see stops on your route. to see rest areas on your route.
Voices Select Settings in the Main Menu, then select Voices. Choosing a voice Select Choose a voice to change the voice that gives spoken directions and other route instructions. A wide range of voices are available. There are computer voices which can read street names and other information directly from the map and there are recorded voices which have been recorded by actors. Note: Computer voices are not available in all languages.
Change the wake-up phrase Use this setting to make your own wake-up phrase. Use voice to accept an alternative route Use this setting to control the ability to accept an alternative route by using your voice. When an alternative route can save you time, the number of minutes is also spoken and not just shown on the screen. Maps Select Settings in the Main Menu, then select Maps. Changing the map Select Change map to change the map that you are using.
Avoid on every route You can choose to avoid ferries and car shuttle trains, toll roads, carpool lanes, and unpaved roads. Set how your TomTom should manage each of these road features when the device calculates a route. Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV) and are not present in every country. To travel on these lanes, you may need to have more than one person in the car, for example, or the car may need to use environmentally-friendly fuel.
Danger zones This type of warning is only given in France where you are only warned about danger zones. Accident blackspots This type of warning is given for a place where road traffic accidents have historically been concentrated. Risk zones This type of warning is only given in France where you are only warned about danger zones. Traffic jams Traffic jam warnings in the route bar are part of TomTom Traffic.
You can see your currently selected country on this screen. Select this setting to change the country. When you change the country, the time/date format, distance units and voice are changed automatically. The list includes the countries from the maps currently installed on your device. Keyboards Select this setting to choose from a list of available keyboards. You use the keyboard to enter names and addresses, such as when you plan a route or search for the name of a town or a local restaurant.
Note: Voice control is not supported on all devices or in all languages. Select this option to see the following information about voice control: How to use voice control Tips for using voice control Which commands can I say? About See System. More help You can get further help by going to tomtom.com/support. For warranty and privacy information, go to tomtom.com/legal.
Getting Help Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information: Voice control Note: Voice control is not supported on all devices or in all languages. Select this option to see the following information about voice control: How to use voice control Tips for using voice control Which commands can I say? About See System. More help You can get further help by going to tomtom.com/support.
Product certification Finding product certification information on your device To find product certification information, such as the ICASA-approved certification number, do the following on your TRUCKER: 1. Select Settings in the Main Menu. 2. Select System. 3. 4. 5. 6. Select About. Select Legal information. Select Certificates. You then see the relevant product certification information for your TRUCKER, for example, ICASA.
Updating using MyDrive Connect About MyDrive Connect MyDrive Connect is a desktop-based application that helps you manage the content and services of your TomTom TRUCKER. For example, you can use MyDrive Connect to get map updates, software updates or manage your MyTomTom account. It is a good idea to frequently connect your TRUCKER to MyDrive Connect to ensure you always have the latest updates. Tip: We recommend using a broadband internet connection whenever you connect your TRUCKER to MyDrive Connect.
Note: You cannot use the mount to connect your TRUCKER to your computer. Note: You should plug the USB cable directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. 5. Enter the requested information for account creation, including your country. When set-up is complete, a MyTomTom account is created and your TRUCKER is linked to that account. You can now access MyDrive Connect from the notification area on your desktop.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy.
Keep your seat belts on. Keep a safe distance from the vehicle in front. Before setting off on a motorbike, fasten your helmet correctly. When riding a motorbike, always wear protective clothing and equipment. When riding a motorbike, be extra vigilant and always ride defensively. Rating: DC5V, 1.2A How TomTom uses your information Information regarding the use of personal information can be found at tomtom.com/privacy. Battery This product uses a Lithium-Ion battery.
CE marking This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment, achieving all the appropriate provisions of the relevant legislation in the EU. R&TTE directive Hereby, TomTom declares that TomTom products and accessories are in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: tomtom.com/legal.
EU Specific Absorption Rate (SAR) compliance THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES WHEN USED AS DIRECTED IN THIS SECTION This GPS Navigation System is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Council of the European Union. The SAR limit recommended by The Council of the European Union is 2.0W/kg averaged over 10 grams of tissue for the body (4.
SoundClear™ acoustic echo cancellation software © Acoustic Technologies Inc.
Copyright notices © 2015 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for limited warranty and end user licence agreements applying to this product. © 2015 TomTom. All rights reserved. This material is proprietary and the subject of copyright protection and/or database rights protection and/or other intellectual property rights owned by TomTom or its suppliers.