TomTom START User Manual 16.
Contents Welcome to navigation with TomTom 6 What's new 7 New in this release ................................................................................................ 7 TomTom videos .................................................................................................... 7 Get going 9 Installing in your car .............................................................................................. 9 Positioning the device ........................................................
Using Quick Search 27 About search ...................................................................................................... 27 Planning a route to a POI using search ....................................................................... 27 Entering search terms ........................................................................................... 30 Working with search results ................................................................................... 31 About postcodes .......
Types of map change ............................................................................................ 71 Traffic 73 About RDS-TMC ................................................................................................... 73 The route bar ..................................................................................................... 73 Looking at traffic on the map .................................................................................
Screen touch sounds ......................................................................................... 94 Language and Units .............................................................................................. 95 System ............................................................................................................. 95 Help ................................................................................................................ 96 Getting Help 97 Help .................
Welcome to navigation with TomTom This Reference Guide explains all you need to know about your new TomTom START navigation device. To learn about getting started with your device and installing it in your vehicle, we recommend that you read the Get going chapter. After that, you will probably want to learn about Quick Search and you can read all about that in the Using Quick Search chapter. For information about what you see on the device itself, go to What's on the screen.
What's new New in this release Version 16.1 GO 40, GO 50, GO 51, GO 60, GO 61, GO 400, GO 500, GO 510, GO 600, GO 610, GO 5000, GO 5100, GO 6000, GO 6100 START 40, START 50, START 60 Record and export tracks, and import tracks and routes You can now record a track while you drive, with or without a route planned. The track is saved in My Routes. You can export tracks as GPX files and save them on a memory card for sharing with other users.
French (France): https://www.youtube.com/watch?v=lYpPDxxXSwk Spanish (Spain): https://www.youtube.com/watch?v=HkZqdD5MkHI German: https://www.youtube.com/watch?v=Skg6PWMbRxI Italian: https://www.youtube.com/watch?v=AybGRzpgu1s USA ONLY - Getting traffic on a smartphone-connected device https://us.support.tomtom.com/app/content/name/Connect/page/3 New products TomTom Bandit (English): https://www.youtube.
Get going Installing in your car Use the supplied mount to install your TomTom START in your vehicle. Read the instructions about positioning your device before you install your START. To install your START, do the following: 1. Connect the supplied USB cable to the mount. If the mount is integrated into your START, connect the USB cable to the device. Note: Use ONLY the USB cable supplied with your START. Other USB cables may not work. 2.
You can also press the On/Off button for more than 2 seconds until you see the Sleep and Turn Off buttons. Select Sleep to make the device sleep. Tip: To send your navigation device to sleep when the USB cable is unplugged or whenever it is removed from the mount, go to Battery settings in the Settings menu.
You can find current and more detailed information at tomtom.com/privacy. Memory card slot Some TomTom navigation devices have a memory card slot that is located on the side or bottom of the device. Before you use the memory card slot, make sure that you have the latest version of the application installed on your navigation device by connecting to MyDrive using a computer. When your START is up-to-date, you can use a memory card as extra storage space to add extra maps, tracks or routes to your device.
What's on the screen The map view The map view is shown when you have no planned route. Your actual location is shown as soon as your START has found your GPS location. You can use map view in the same way as you might look at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons.
1. Back button. This button returns the map to an overview of your whole route or, if no route is planned, moves the map to put your current location at the centre. 2. Switch view button. Select the switch view button to change between the map view and the guidance view. When in map view, if you are driving, the small arrow rotates to indicate your direction of travel relative to north, with north being up. 3. Zoom buttons. Select the zoom buttons to zoom in and out. 4. Current location.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of travel, change the 2D and 3D default settings. Tip: When you have planned a route and the 3D guidance view is shown, select the switch view button to change to the map view and use the interactive features. When your START starts after sleeping and you have a route planned, you are shown the guidance view with your current location. 1. Switch view button.
6. Speed panel. This panel shows the following information: The speed limit at your location. Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed panel turns red. If you drive less than 5 km/h or 3 mph over the speed limit the speed panel turns orange. The name of the street you are driving on. 7. Current location. This symbol shows your current location. Select the symbol or the speed panel to open the quick menu.
symbols. For a complete list of incident types, see Traffic incidents. The bottom of the route bar represents your current location and shows the distance to the next incident on your route. Note: To make the route bar more readable some incidents may not be shown. These incidents will always be of minor importance and only cause short delays. The route bar also shows status messages, for example Finding fastest route or Playing route preview.
Search Drive Home Drive to Work Recent destination Current route Select this button to search for an address, a place or a Point of Interest, then plan a route to that location. Select this button to drive to your home location. If this button is not included in your main menu, go to My Places to set up you home location. Select this button to drive to your work location. If this button is not included in your main menu, go to My Places to set up you work location.
Parking Petrol Station Traffic & Speed Cameras Select this button to find car parks. Select this button to find petrol stations. Select this button to use traffic with your RDS-TMC receiver. Main Menu smaller buttons and symbols On the map or guidance view, select the Main Menu button to open the Main Menu. The following buttons are available in the Main Menu screen, in addition to the navigation buttons: Select this button to open the Settings Menu. Select this button to open the Help Menu.
This symbol shows that your START is connected to your TomTom account. This symbol shows that your START is not connected to your TomTom account. This button shows that you will hear voice instructions. Select this button to switch off voice instructions. You will no longer hear spoken route instructions but you will still hear information such as traffic information and warning sounds. Tip: You can select the types of instructions you want to hear.
This Reference Guide explains which gestures to use throughout the guide but here is a complete list of all the gestures you can use. Double tap Touch one finger on the screen twice in rapid succession. Example of when to use this: Zooming in on the map. Drag Put one finger on the screen and move it across the screen. Example of when to use this: Scrolling around in the map. Flick Flick the tip of a single finger across the screen. Example of when to use this: Scrolling a big distance on the map.
Reordering the Main Menu buttons To reorder the buttons in the Main Menu to suit your preference, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Press and hold the button you want to move for two seconds. Tip: Alternatively, select the Edit button on the far right of the Main Menu. The menu button is shown with left and right arrows. 3. Press the left or right arrow on the menu button to move the button to a new position in the menu. 4.
Syncing using TomTom MyDrive About TomTom MyDrive TomTom MyDrive is the easy way to import community POI files on your TomTom START. Logging in to your TomTom account You must log in to MyDrive to sync to your TomTom account. When you log in to your TomTom account from your navigation device or when using a web browser, syncing with your account happens automatically. Logging in to MyDrive on your START 1. Connect your START to your computer using MyDrive Connect. 2.
Planning a route with stops using MyDrive When you are logged in to MyDrive using a web browser, you can create a route with stops and send it to your navigation device. When your navigation device is logged in to your TomTom account, your device syncs with MyDrive and receives the destination. Creating a route with stops 1. Connect your START to your computer using MyDrive Connect. 2. In a web browser, log in to your TomTom account. 3. On the map, select a destination.
Tip: All MyDrive destinations are saved in Recent Destinations in the Main Menu and also in in My Places. Deleting a MyDrive destination from My Places 1. Connect your START to your computer using MyDrive Connect. 2. In the Main Menu of your device, select Recent Destinations. Tip: Alternatively select My Places, followed by Recent Destinations. 3. Select Edit List. 4. Select the locations you want to delete. 5. Select Delete.
Your new POI list opens showing all the POIs in the list. Select the map view to see the POIs on the map. Deleting a community POI list You can only delete an uploaded POI list when your START is connected to your computer using MyDrive Connect. To delete a POI list, do the following: 1. Connect your START to your computer using MyDrive Connect. 2. In MyDrive, select the POI file you want to delete, then select Delete. The POI list is removed from your My Places list.
2. In MyDrive, select My Routes. 3. Select the track file you want to delete, then select Delete. The track is removed from your My Routes list. Saving and restoring your personal navigation information When you are logged in to MyDrive on your START, and your START is connected to your computer, your personal navigation information is continuously and automatically saved to your TomTom account.
Using Quick Search About search You use search to find a wide range of places and then navigate to them. You can search for the following: A specific address, for example, type in 123 Oxford Street, London. A partial address, for example, type in Oxford st Lon. A type of place, for example, type in petrol station or restaurant. A place by name, for example, type in Starbucks. A postcode, for example, type in W1D 1LL for Oxford Street, London.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, the whole map is searched.
6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
Entering search terms Select Search in the Main Menu to start searching for addresses and POIs. The search screen opens showing the keyboard and the following buttons: 1. Back button. Select this button to go back to the previous screen. 2. Search input box. Enter your search term here. As you type, matching addresses and POIs are shown. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available.
you have selected the town or city from the results list, you can search for an address or POI in that city. Along route When a route has been planned, you can select this option to search along your route for a specific type of location, for example, petrol stations. When prompted, enter the type of location and then select it in the right-hand column to carry out the search. Near destination When a route has been planned, you can select this option to use your destination as the centre for your search.
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: When you select an address from the list of search results, you can choose to show it on the map, add a crossroad or plan a route to that chosen location. To get an exact address you can add the house number. If you show the result on the map, you can use the pop-up menu to add the location to My Places. If a route is already planned, you can add the location to your current route.
About postcodes When searching using a postcode, your results depend on the type of postcode used in the country that you are searching in. The following types of postcodes are used: Postcodes that navigate you to a street or part of a street. Postcodes that navigate you to an area comprising, for example, a single town, several villages in a rural area or a district in a large city. Postcodes for streets Countries such as the Netherlands and the United Kingdom use this type of postcode.
Legal - Solicitors Financial institution Legal - other services Food services Convenience store Fast food restaurant Restaurant Chinese restaurant Accommodation Hotel or motel Luxury hotel Camping ground Economy chain hotel Emergency services Hospital or polyclinic Dentist Police station Veterinarian Doctor Fire station Car-related services Outside parking Petrol station Parking garage Car wash Car dealer Vehicle inspection centre Rental car facility Electrical car charging point(s)
Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication Company Community service Post office Pharmacy Shopping centre Beauty services Tourist information office Shop College or university School Library Convention centre Casino Winery Theatre Tourist attraction Cinema Zoo Concert hall Amusement park Education Leisure 35
Museum Exhibition centre Opera Cultural centre Nightlife Leisure centre Children's Farm Sport Playing field Swimming pool Mountain peak Water sports Beach Tennis court Park or recreation area Ice skating rink Yacht basin or marina Sports centre Stadium Golf course Church Place of worship Railway station Mountain pass Airport Scenic or panoramic view Religion Travel 36
Ferry terminal Postcode Note: Not used in all countries.
Planning a route Using suggested destinations What are suggested destinations? Your TomTom START can learn your daily driving habits to saved favourite Places and it can also suggest destinations when you start the device from sleep mode, for example, when driving to Work in the morning. Getting ready for suggested destinations Before you get your first suggested destination, your device needs some time to learn about your habits.
1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for an address, town, city, postcode or mapcode.
5. Select an address suggestion. 6. Enter the house number if you have one and haven't entered it already. Tip: If you enter a house number that is not found, then the number appears red. The nearest house number that is found is shown in the Drive button. You can enter a new house number, or you can select Drive/Ride to drive to the nearest house number. 7. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins.
2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the city or town you want to plan a route to. You can search for a town, city, or postcode. Tip: To search for a specific city you can use the city's postcode or the country. For example, searching for Essen will return many results. If you search for Essen 2910 or Essen Belgium then that city will be at the top of the results. You can then search in the city.
6. Select the city centre POI. The city centre location is shown on the map. 7. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, the whole map is searched.
6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
A pop-up menu shows the nearest address. 3. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can use the location you selected in other ways, such as adding it to My Places, by selecting the pop-up menu button.
A list of all your Places opens. 3. Select the Place you want to navigate to, for example Home. Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
2. Select Search. The search screen opens with the keyboard showing. 3. Select the type of search button to the right of the search box. 4. Select Latitude Longitude. 5. Type in your pair of coordinates. You can enter any of these coordinate types: Decimal values, for example: N 51.51000 W 0.13454 51.51000 -0.13454 Tip: For decimal values you don't have to use a letter to indicate the latitude and longitude.
Planning a route using a mapcode Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using a mapcode, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Type in your mapcode. You can enter any of these mapcode types: International, for example, WH6SL.TR10. Country-specific, for example, GBR 8MH.51.
2. On the map view, select the route itself. 3. Select the pop-up menu button to open the menu. 4. Select Alternative Route and then select Find alternative. Up to three alternative routes are shown on the map view. Each alternative route shows the difference in travel time in a balloon. 5. Select your chosen route by tapping on the time balloon. 6. Select Let's go. 7. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
A pop-up menu shows a list of options. 7. Select Use as Starting Point. 8. Repeat the search steps to choose your destination, and then select Drive/Ride in the pop-up menu. Your route is planned using your chosen starting point and destination. The estimated journey time is shown at the top of the route bar. Tip: Stops, POIs, Places and the destination can all be selected as starting points using their pop-up menus. Tip: You can save the route in My Routes. 9.
A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop. Finding a car park Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a car park, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Parking. The map opens showing the locations of car parks.
You can change the screen to show a list of car parks by pressing this button: You can select a car park from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a car park from the map or the list.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a car park as a stop on your route by using the pop-up menu. Finding a petrol station Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a petrol station, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Petrol Station.
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a petrol station from the map or the list. A pop-up menu opens on the map showing the name of the petrol station. 4. Select Drive/Ride depending on which device you are using.
Changing your route The Current Route menu When you have planned a route or track, select the Current Route or Current Track button in the Main Menu to open the Current Route or Current Track Menu. The following buttons are available in the menu: Clear Route / Clear Track Skip Next Stop Find Alternative Select this button to clear the currently planned route or track. The Current Route Menu closes and you return to the map view. Select this button to skip the next stop on your route.
Show Instructions Select this button to see a list of turn-by-turn text instructions for your planned route. The instructions include the following: Your current location. Street names. Up to two road numbers shown in road shields whenever available. An instruction arrow. An instruction description. The distance between two consecutive instructions. Exit number. The full addresses of stops on your route.
Drive to Route or Track Select Drive to Route to plan a route from your current location to the starting point of a My Route. The starting point is converted to a stop. Drive to Track plans a route to the nearest point of the track from your current position. Drive to Starting Point On the Current Track menu, select this button to plan a route to the starting point of the track. The starting point is converted to a stop. For more information, see Navigating using a track.
1. Select the Main Menu button to open the Main Menu. 2. Select Current Route. 3. Select Avoid Part of Route. A screen opens showing a list of the sections that comprise your current route. 4. Select the section of the route that you want to avoid. A preview shows you the section you have chosen on the map. 5. Select Avoid. A new route is found that avoids your chosen route section. The new route is shown on the map view.
Ferries and car shuttle trains Carpool Lanes Unpaved Roads Note: Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV lanes) and are not present in every country. To travel on these lanes, you may need to have more than one person in the car, for example, or the car may need to use environmentally-friendly fuel. If you choose to avoid a route feature, a new route is planned.
Deleting a stop from your route 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. In the route bar, press the stop you want to delete. The map zooms in to the stop and shows a pop-up menu. Tip: If you select the wrong stop press the back button to return to the map. 3. Select Delete This Stop. The stop is deleted and your route is recalculated.
My Routes About My Routes My Routes provides an easy way to save and retrieve routes and tracks. You may want to use My Routes in one or more of the following situations: While working - Your job involves driving several routes with multiple stops on a daily basis. Your routes can change and you need to be flexible and be able to change the order of your stops or change the planned route. While on holiday - You are going on holiday and want to plan and save a route.
Use a tool such as Tyre Pro to view your track file. Export to a memory card or directly to your computer, then use your computer to view the file using software such as Google Earth. Note: While viewing your recording, you may notice that the recorded GPS locations do not always correspond with the roads. This can happen for several reasons. Firstly, your device tries to keep the files small and this can cause a slight loss of data precision.
7. Select Add to save your route in the My Routes list. Tip: You can also save a route using the Add to My Routes button in the Current Route menu. Navigating using a saved route To navigate using a previously saved route, do the following: 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. To navigate to the start of the saved route, select Drive/Ride depending on which device you are using.
Note: Your original route in My Routes is not changed. If you want to see the whole route, select the route again in My Routes. 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. Select the stop that you want to use as your starting point, then select the pop-up menu button to open the menu. 4. Select Start Route From Here. Your route is calculated from the new starting point. 5. Select Drive/Ride.
The starting point of your route is converted to your first stop and then the route is planned from your current location. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Change to a Stop. Alternatively, select Drive to Route or Ride to Route in the Current Route menu.
Tip: To update the saved route in your My Routes list with the changes, select the route om the map then select Save Changes to Route in the pop-up menu. Recording a track You can record a track while you drive, with or without a route planned. After recording, you can then export your track so that you can share it with others or view it using tools such as Tyre Pro. To record a track, do the following: 1. In the Main Menu, select Start Recording.
3. Select the track, then select the pop-up menu. 4. Select Drive to Starting Point. The starting point of the track is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Note: You see two different colours on the map for your route and track.
5. When you see a message that your tracks have been exported successfully, remove your memory card to share your tracks with other users. Note: Each exported route is saved as a GPX file in the TomTom Routes folder on your memory card. Importing routes and tracks from a memory card You can import two types of files from a memory card: GPX files - these become tracks after import. ITN files - these become routes after import. ITN files are TomTom itinerary files.
Map Share About Map Share You can report map changes using Map Share. These map changes are then shared with other TomTom device users when they receive a map update. There are two ways to report a map change: Select a location on the map and create the change report immediately. Mark a location and create the change report later. To send your map change reports to TomTom, you must connect your START to your computer and use MyDrive Connect. All map changes are verified by TomTom.
Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 5. Follow the instructions for your chosen type of map change. 6. Select Report. 7. Connect your START to MyDrive Connect to send your map change report to TomTom and receive map changes from other TomTom users. Creating a map change report from a marked location If you see a map inconsistency while you are driving, you can mark the location so you can report the change later.
Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 7. Follow the instructions for your chosen type of map change. 8. Select Report. The marker for the marked location is removed from the map. 9. Connect your START to MyDrive Connect to send your map change report to TomTom and receive map changes from other TomTom users. Types of map change There are several types of map change available.
Turn Restriction Select this option to report incorrect road turn restrictions. 1. 2. 3. 4. 5. 6. Press and hold to select the location of the map change on the map view. Select the pop-up menu button to open the menu. Select Report Map Error from the pop-up menu. Select Turn Restriction. If the incorrect junction is shown, select Select another junction. Select the approach direction. The map rotates so that the direction you are coming from is shown at the bottom of the screen. 7.
Traffic About RDS-TMC The Traffic Message Channel (TMC), also known as RDS-TMC, transmits traffic information as a radio signal and is available free of charge in many countries. TMC is not a TomTom service, but is available when using the TomTom RDS-TMC Traffic Receiver. Note: TMC is not available in all countries. To check the availability of TMC services in your country, go to tomtom.com/5826. TomTom is not responsible for the availability or quality of traffic information provided by TMC.
The symbols are in the order that they occur on your route. For traffic incidents, the symbol for each incident alternates between showing the type of incident and the delay in minutes. Select a symbol to see more information about a stop, an incident or a speed camera. If a symbol is shown on top of another symbol, selecting the symbols zooms in on the route bar to show each symbol separately. You can then select a symbol.
The colour of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate. For a complete list of incident types, see Traffic incidents. Tip: You see weather symbols on the map if there is bad weather such as heavy rain or snow. 2. Traffic incident on your route but in the opposite direction of travel. 3.
Slow traffic Unknown accident Unknown incident Roadworks Lane closure Road closure Weather symbols: Wind Rain Fog Snow Ice Approaching a traffic jam warning A warning is given as you approach a traffic jam.
A warning symbol is shown in the route bar. The route bar zooms in to the start of the traffic jam. Your distance to the start of the traffic jam is shown in the route bar. The colour of the road on the route bar changes to orange or red, depending on the severity of the traffic jam. The background colour of the route bar background changes to red if you are driving too fast towards the traffic jam. You hear a warning sound.
As you approach an exit or junction, the lane you need is shown on the screen and in the instruction panel. Tip: To close the lane image, select anywhere on the screen. To turn lane images off, select the Settings button in the Main Menu, then select Appearance. Switch off the Show previews of motorway exits setting. Time-dependent speed limits Some speed limits change depending on the time of day.
Speed Cameras About speed cameras The Speed Cameras service warns you about the following camera locations: Fixed speed camera locations. Average speed camera locations. Speed enforcement zones. Red light camera locations. Traffic restriction cameras. The Speed Cameras service also warns you about the following safety hazards: Accident blackspot locations. Note: Your new TomTom START comes pre-loaded with speed camera locations.
Symbol shown on map Symbol shown in route bar Description Average speed cameras - these types of cameras measure your average speed between two points. You are warned at the start and end of the average speed check area. While you are driving in an average speed check area, your average speed is shown, instead of your current speed. The distance to the end of the area is shown in the route bar. Speed enforcement zones - these zones can contain multiple speed cameras.
For example, to change how you are warned when you approach a fixed speed camera, do the following: 1. 2. 3. 4. Select Sounds & Warnings in the Settings Menu. Select Cameras. Select Fixed cameras. Select one of the following warning options: Always. Only when speeding. Never. 5. Select the back button. Tip: To turn off all audible warnings, select Settings, followed by Sounds & Warnings and then switch off Speed camera warnings.
Danger Zones About danger zones The Danger Zones service warns you about danger zones on your route when you are in France. Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile speed cameras when you are driving in France. To be compliant with this change in French law, speed camera locations are no longer reported but instead areas of danger are indicated as danger zones. Important: Outside of France, you receive warnings about speed cameras.
While you are driving in a zone your distance to the end of the zone is shown in the route bar. To change the way you are warned about danger zones, select Sounds & Warnings in the Settings Menu. When you first start using your device, warning sounds are played for these types of zones: Symbol shown on map Symbol shown in route bar Description Danger zone - this type of warning is only given in France. You are warned at the start and end of the danger zone.
My Places About My Places My Places provides an easy way to select a location without the need to search for the location each time. You can use My Places to create a collection of useful or favourite addresses. Tip: The terms "favourite" and "place" mean the same thing - favourites are places that you go to often. The following items are always in My Places: Home - Your home location can be your home address or somewhere you often visit. This feature provides an easy way to navigate there.
Zoom in on the map at the location you want to select. Press and hold to select the location, then select the home or work location symbol. Select the Search button and search for a location. Select a location to set as home or work. Select Set home location or Set work location. Setting your home or work location using the map 1. In the Map View, move the map and zoom in until you can see your home or work location. 2. Select the location by pressing and holding the screen for about one second.
1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home". Note: "Home" must have a capital letter H. 3. Select Add. Your home location is changed to the new location. Adding a location from My Places 1. In the Main Menu, select My Places. 2. Select Add a new place. 3. To select a location, do one of the following: Zoom in on the map at the location you want to select. Press and hold to select the location, then select the add location symbol. Search for a location.
Adding a location to My Places using search 1. 2. 3. 4. In the Main Menu, select Search. Search for a location. Select the location then select Show on map. When the map view shows the location, select the pop-up menu button. 5. Select Add to My Places. The name of the location appears in the edit screen. 6. Edit the name of the location so you can easily recognise it. 7. Select Done to save your location in the My Places list.
Settings Appearance Select Settings in the Main Menu, then select Appearance. On this screen, you can change these settings: Display Select Display to change the appearance of the display. Route bar Select Route bar to change the information you see in the route bar. Guidance view Select Guidance view to change the information you see in the guidance view. Automatic zoom Select Automatic Zoom to change how you view a junction as you drive.
Night brightness Move the slider to adjust the brightness level of the screen during the night. Select Switch to night colours when dark to automatically switch to night colours when it gets dark. Size of text and buttons Select Size of text and buttons to change the size of the text and the buttons you see on the screen. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen.
Arrival information Select Arrival information to change the following settings: Show remaining distance Select this setting to show the remaining distance left to travel in the arrival information panel during navigation. Show remaining time Select this setting to show the remaining time left to travel in the arrival information panel during navigation.
Automatic Zoom Select Settings in the Main Menu, then select Appearance. Select Automatic zoom to change settings for the automatic zoom in Guidance view when you approach a turn or a junction. Zooming in can make the turn or junction easier to drive. Zoom in to next turn All the turns and junctions on your route are shown zoomed in to the maximum level. Based on road type The turns and junctions on your route are shown zoomed in to the standard level for the type of road you are on.
Use this setting to control whether street names are read aloud as part of navigation instructions. For example, when street names are read aloud, you hear "Turn left Graham Road towards Hackney." Read aloud foreign street names Use this setting to control whether foreign street names are read aloud as part of navigation instructions, such as "Turn right Champs Élysées". For example, an English computer voice can read and pronounce French street names but pronunciation may not be completely accurate.
Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city. Most eco-friendly route - the most fuel-efficient route for your journey. Winding route - the route with the most turns. Note: Winding routes are only available for TomTom Rider navigation devices. Avoid motorways - this type of route avoids all motorways. Walking route - a route designed for making the journey on foot.
Cameras Select Settings in the Main Menu, then select Sounds & Warnings. Select Cameras to set how you want to be warned for the different types of cameras. You can set whether you want to be warned, never warned or warned only if you are speeding. Tip: When Speed camera warnings in Settings > Sounds & Warnings switched off then this option is not visible. Hazards Select Settings in the Main Menu, then select Sounds & Warnings. Select Safety warnings.
Language and Units Select Settings in the Main Menu, then select Language & Units. On this screen, you can change the following settings: Language You can see your currently selected language on this screen. Select this setting to change the language used for all buttons and messages that you see on your START. When you change the language setting, the voice automatically changes and units are set to automatic. Country You can see your currently selected country on this screen.
Traffic Download speed camera locations Quick Search Send speed camera reports Suggested destinations If you agree, your device suggests destinations. If you disagree at a later time, your historical route information is removed. This means that if you want to receive suggested destinations again at a later time, the feature has to relearn your driving patterns before it can start suggesting destinations. Battery settings Select this setting to control power saving options on your START.
Getting Help Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information: Guided tour Select this option to get a short tutorial on how to use your navigation device. About See System. More help You can get further help by going to tomtom.com/support. For warranty and privacy information, go to tomtom.com/legal.
Product certification Finding product certification information on your device To find product certification information, such as the ICASA-approved certification number, do the following on your START: 1. Select Settings in the Main Menu. 2. Select System. 3. 4. 5. 6. Select About. Select Legal information. Select Certificates. You then see the relevant product certification information for your START, for example, ICASA.
Updating using MyDrive Connect About MyDrive Connect MyDrive Connect is a desktop-based application that helps you manage the content and services of your TomTom START. For example, you can use MyDrive Connect to get map updates, software updates or manage your TomTom account. It is a good idea to frequently connect your START to MyDrive Connect to ensure you always have the latest updates. Tip: We recommend using a broadband internet connection whenever you connect your START to MyDrive Connect.
Note: You should plug the USB cable directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. 5. Enter the requested information for account creation, including your country. When set-up is complete, a TomTom account is created and your START is linked to that account. You can now access MyDrive Connect from the notification area on your desktop. MyDrive Connect starts automatically after the account is created.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy.
Keep your seat belts on. Keep a safe distance from the vehicle in front. Before setting off on a motorbike, fasten your helmet correctly. When riding a motorbike, always wear protective clothing and equipment. When riding a motorbike, be extra vigilant and always ride defensively. Rating: DC5V, 1.2A How TomTom uses your information Information regarding the use of personal information can be found at tomtom.com/privacy. Battery This product uses a Lithium-Ion battery.
CE marking This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment, achieving all the appropriate provisions of the relevant legislation in the EU. Model numbers: 4FC64, 4FC54A, 4FC43 R&TTE directive Hereby, TomTom declares that TomTom products and accessories are in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC.
The SAR limit recommended by The Council of the European Union is 2.0W/kg averaged over 10 grams of tissue for the body (4.0 W/kg averaged over 10 grams of tissue for the extremities - hands, wrists, ankles and feet). Tests for SAR are conducted using standard operating positions specified by the EU council with the device transmitting at its highest certified power level in all tested frequency bands.
Copyright notices © 1992 - 2016 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for limited warranty and end user licence agreements applying to this product. © 1992 - 2016 TomTom. All rights reserved. This material is proprietary and the subject of copyright protection and/or database rights protection and/or other intellectual property rights owned by TomTom or its suppliers.