Contents Welcome to navigation with Tom Tom 8 Get going ARSING IN POUT BAT vexes mime orn es cress assess nes nth ae sas ens sobs es sane tens nme Positioning the device Switching on and off Setting up. GPS reception. Planning a route to an address using search. Planning a route USING Te MED... Connecting to Tom Tom services 13 About Tom Tom services Always connected devices . Smartphone connected devices Personal Area Networks Connect to Tom Tom services using your smartphone.
Main Menu 25 Navigation buttons Other buttons. Volume contra Using Quick Search 28 About search enter Planning a route io a PO! using search Entering search terms ‘Working with search results About postcodes... About opcodes List of POI type icons. Planning a routes 38 Planning a route to an address using search.
The route bar .. a Looking at traffic o on nth map. Looking at traffic on your roe . Traffic incidents Speed Cameras About speed cameras .. Speed camera warnings Changing the way you are warmed Reporting a new speed camera... Confirm or remove a mobile speed caner: ol Updating locations for cameras and hazards... ceca BE Danger Zones 68 About danger zones and fBK ZONES co.cc Dangs zone and risk zone warnings Changing the way you are warned Report a risk zone... . .
Product certification 83 Finding product certification information on your device. My Drive 84 About My Drive About My Drive Connect Tommy account Setting up My Drive ..
Welcome to navigation with Tom Tom This Reference Guide explains all you need to know about your new Tom Tom GO navigation device. if you want a quick read of the essentials, we recommend that you read the Get going chapter. This covers installation, switching on, setting up and planning your first route. After that, you will probably want to connect to Tom Tom services and you can read all about that in the Connecting to services chapter.
ting in your ser Usa the mount provided with your devices fo install your Tom Tom GO device in your vehicle. Read the instructions about positioning your device before you install your device, Te install your device, do the following: 1. Connect the supplied USE cable to the mount. if the mount is integrated into your device, connect the USB cable to the device. 2. Connect the USE cable to the USE car charger and plug this into the power supply on your dashboard. 3.
Sanding your device to sleep To send your navigation device to pleas, press the On/Off button and then release it. You can also press the On/Off button for more than 2 seconds until you ses the Slap and Turn Off buttons. Select Leap io make the device sleep. Switching your device off completely To switch off your navigation device completely, you can do one of the following: = Cross and hold the On/Off button for more than 2 seconds until you ses the Sleep and Turn Off bunions.
2. Select Search. @ ho The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to. You can search for an address, town, city, postcodes or mapped. 4. As you type the address, suggestions are shown based on what you have entered. You san continue typing or select a suggestion. Towns and roads are shown on the left, Poos are shown on the right.
5. Select an address suggestion. 6. Enter the house number if you have one and haven't entered it already. 7. Select Drive. Your navigation device plans a route then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Landing » route using the map Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. Te plan a route using the map, do the following: 1.
+ Drag to scroll the map, touch the screen with a finger and move it across ths screen. = Flick to scroll the map a long way, flick the tip of a finger across the screen. 2. When you have found your destination on the map, select it by pressing and holding the screen for about one second, A pop-up menu shows the nearest address. 3.
Connecting to Tom Tom services About Tom Tom services Tom Tom services give you real-time information about traffic and speed cameras on your route. To get Tom Tom services on your GO you need 8 Mastectomy account. The way you connect your GO to Tom Tom services depends on your navigation device. A GO can connect in one of the following ways: = With a permanent connection directly from your GO. Tess navigation devices are called ‘Always Connected devices. = With a connection via your smartphone.
Important: You might have additions! costs when you use the internet on your phone, especially if you ars outside the area covered by your data plan. Check with your mobile services provider for more information, Personal Area Networks Your phone shares iis internet connection by using the phone's Bluetooth and Personal Area Network (PAN) functions.
Domesticating your smartphone You do not need te do anything to reconnect your GO to your hons. Your GO will remember your phone and will find it automatically when you have Persona! Ares Network (PAN) and Bluetooth switched on and you are in range of your navigation device, If you have a valid Tom Tom services subscription, the service will start automatically. The Bluetooth icon at the top of the main menu screen shows the status of the Bluetooth connection: Bluetooth not connected. your phone.
Unable to gel 5 connection if your GO cannot connect to your phone, of you have no internet connection, check the follow ing: = Your phone is shown on your Tom Tom navigation device. = Your phone's Bluetooth is switched on. = Your phone's Personal Area Network (PAN), which is also known as Personal Potshot, Tether ing, or Bluetooth Tet haring, is switched on. = Your data pain with your mobile services provider is active, and you can access the Internet on your phone.
My device Memory sand slot Some Tom Tom navigation devices have a memory card slot that is located on the side or bottom of the device. Before you use the memory card slot, make sure that you have the latest version of the application installed on your navigation device by connecting to My Drive using a computer. When your device is up-to-date, you can use a memory card as extra storage space to add extra maps to your device. Maps can be purchased from pantomimic.
Additional information If you think that your information is not being used for the purpose for which you have provided it to Tom Tom, contact us at mom. nonsupport. You can find current and more detailed information at Platting help You can get further help by going to tom tom nonsupport. For warranty and privacy information, go to tom tom .commercial. Toke ere of your navigation doves it is important to take care of your device: Do not open the casing of your device under any circumstances.
What's on the screen The map view The map view is shown when you start your navigation device and you have no planned route, Your actual location is shown as soon as your device has found your GPS location. You can use map view in the same way as you might lock at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons.
4. Current location, This symbol shows your current location. Select it to add it to My Places or search near your current location. 5. Selected location. Press snd hold to select s location on the map. Select the pop-up menu bunion to show options for the [ovation, or salsa the drive button to plan a routs to the cola son. 6. Main Menu button. Select the button to open the Main Menu. 7. Map symbols. Symbols are used on the map to show your destination and your saved places: o Your home location.
When your navigation device starts slier it was turned off and you have a route planned, you are shown the map view with your current location. Switch view button. Sal act the switch via button to change between the map view and the guidance view. 2. Zoom buttons. Select the zoom buttons to zoom in and out. 3. Instruction panel. This panel shows ths following information: = Ths direction of your next turn. = The distance to your next turn. = The name of the next road on your route.
The arrival information panel shows ths following information: = The estimated teems that you will arrive at your destination. = Tha length of time to drive to the destination from your current location. = A parking button is shown near the destination flag when parking is available near your destination. if you have stops on your route, select this pane! to change between information about the next stop and your final destination. You can choose the information you see on the arrival information panel.
As you approach an exit or junction, the lane you need is shown on the screen and in the instruction pans! To turn lane images off, select Settings in the Main Menu, then select Appearance. Switch off the Show previews of motorway exits salting. Time do pendant speed meets In Australia ond New Greenland If you are driving in Australia or New Zealand, the speed limit in the sped pane! changes depending on the time of day.
Using gestures Aft about gestures You dean to use gestures to control your navigation devices. Whiz Reference Guide explains which gestures to uss throughout the guides but here is 2 complete list of all the gestures you can use. Double tap | ny Tap or select cL Touch one finger on the screen twice in rapid succession, Example of when to use this: Zooming in on the map. Put one finger on the screen and move it across the screen. Example of when to use this: Scrolling around in the map.
Minn Menu Navigation bullion On the map view or guidance view, select the Main Menu bunion to open the Main Menu, The following navigation buttons are available in the Main Mani: Select this button to search for an address, a place or a Point of Interest, then plan 8 route to that location. Search ©) bo Current route Else this button to clear or sangs your planned route. fy Places Select this button to show your saved places. Select this button to show your saved roues.
Perot! Station Select this button to find petrol stations. O Traffic & Safety Select this button to connect to Tom Tom services, or to check your Tom Tom Traffic, Tom Tom Speed Cameras or Tom Tom Danger Zones subscription. Warnings Oran buttons On the map or guidance view, select the Main Menu button to open the Main Menu. The following bunions are available in the Main Menu screen, in addition to the navigation buttons: Select this bunion to open the Settings Menu, Select this button to open the Help Mani.
This symbol shows the status of the Tom Tom Traffic service. Select this button to switch off voles instructions. You will no longer hear spoken route instructions but you will still hear information such as traffic information and warning sounds. Select this button to switch un voles instructions. Select this button to reduce the brightness of the screen and display the map In darker colors.
Using Quick Search About search You uss search te find a wide range of places and then navigates to them. You can search for the following: = A specific address, for example, 123 Oxford Street, London, = A partial address, for example, Oxford st Lon. = Laity of pace, for example, petrol station or restaurant. = A place by name, for example, Starbucks. = A postcode, for example, W1D ILL for Oxford Street, London.
Bela Hast ans You can search for a PO! {Point of rainstorm] type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example, "Rosie's Pizzeria. 4. As you type, suggestions are shown based on what you have entered. You can continua typing or sslsct a suggestion. Towns and roads are shown on the left, Pols are shown on the right. &. Select a PO! type or an individual POL §. If you dissected a PO! type, select your chosen POL $0 Bee nn 7. Select Drive.
Your navigation device plans a route then stairs to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Entering search {ors Select Search in the Main menu to start searching for addresses and POs. The search screen opens showing the keyboard and the following buttons: 1 7 1. Back button. Select this button to go back to the previous screen. 2. Search input box. Enter your search term hers. As you type, matching addresses and Poos ara shown, 3.
search center. The results are ranked by distance. In town or city Select this option to use a town or city as the center for your search. You need to enter the town or city name using the keyboard. L Along route When a route has been planned, you can select this option to search along your routs for a specific type of location, for example, petrol stations. When prompted, enter the type of location and then select it in the right-hand column to carry out the search.
Working with search results After carrying out a search, you see your search results in two columns. Address and city matches sre shown in the Sift-hand column and Pis, types of Poos and Places are shown in the right-hand column. a Ark Stan When you select an address from the list of search resells, you can choose to show it on the map, add a crossroad or plan & routs to that chosen location.
if you show the result on the map, you can use the pop-up menu to add the location to My Places or search near this location. If a routs is already planned, you can add the location io your current route. About postpones When searching using a composite, your results depend on the type of postcode used in the country that you ars searching in. The following types of postcodes are used: = Street postcodes navigate you to a street or part of a street.
About nematodes In countries where roads and houses have no names or addresses, you can use 8 map code instead. A mapped represents a location. Every location on Earth, including those in the aes lke islands and oil rigs, can be represented by a map cods. Nematodes are short, and says 16 recognize, remember and communicate. They are praise to 8 few meters, which is good enough for every-day usa. Go to mapcode.som for instructions on how to find the map code for a location.
Emergency services H Hospital or polyclinic a.
wv i lin, = (ng Leisure ZEN BES Sport Px AE Shopping center Tourist information office College or university Library Casino Theater Cinema Concert hall Museum Opera Nightlights Playing field Mountain peak hid GC IH 22 fim Beauty services Shop Achoo! Convention center Binary Tourist attraction Zoo Amusement park Exhibition center Cultural center Leisure center Swimming pool Waters ports
8 Travel Beach Park or recreation ares Yacht basin or marina Stadium Church Railway station Airport Ferry terminal Border crossing Bus station Toll gate Rest area City censers Tennis court lee skating rink Sports tantra Golf course Place of worship Mountain pass Scenic or panoramic view Postcode Residential area Petrol station Electrical car charging stations Truck stop
Planning a route Planning » route to an address using search Important: in the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. Te plan a routs to an address using search, do the following: 1. Selectness Main Menu button to open the Main Ms nu. 2. Select Search. The search screen opens with the keyboard showing. 3.
4. As you type the address, suggestions are shown based on what you have entered. You san continue typing or select a suggestion. Towns and roads are shown on the left, Poos are shown on the right. 5. Select an address suggestion. 4. Enter the house number if you have one and haven snared it already. 7. Select Drive. Your navigation devices plans a route then starts to guide you to your destination. Ags soon as you start driving, the guidance view is shown automatically.
Planning » route fo a POL angel search Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. Te plan a route to 2 PO! type or a specific POI using search, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search. @ fd The search screen opens with the keyboard showing. 3. Use the keyboard to rents the name of the place you want to plan a routs to.
5. Select a POI type or an individual POI 6. If you selected a POI type, select your chosen POL 7. Select Drive. Your navigation devices plans a routs then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Planning » route using the map Important: in the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. Te plan a route using the map, do the following: 1.
2. When you have found your destination on the map, select it by preaching and holding the screen for about one second. A pop-up menu shows the nearest address. 5 3. To plan a route to this destination, select the drive bunion: Your navigation device plans a routs then stairs to guide you to your destination. As soon as you start driving, the guidance view is shown automatically.
Planning 2 route using My Places To navigate to ons of My Laces from your currant location, do ths following: 1. Select the Main Mani button to open the Main Mani. ww " 2. Select My Places. 3. Select the Claps you want to navigate to, for example Oms. Your chosen Claps is shown on the map with 2 pop-up menu.
4. To plan a route to this Place, select the drive button: Your navigation device plans a route then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Planning = route using coordinates important: In the interest of safety and to avoid distractions while you are driving, you should always plan 8 route before you start driving. To plan 8 route using a pair of coordinates, do the following: 1. Select the Main Mani button to open the Main Menu.
7. Select a suggestion for your destination. 8. Select Drive. Your navigation device plans a route then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Planning » route using a ma pends Important: In the interest of safety and to avoid distractions while you are driving, vou should always plan a route before you start driving. Te plan a route using a map code, do the following: 1. Select the Main Menu button to open the Main Menu. 2.
5. Select a suggestion for your destination. 8. Select Drive. Your navigation device plans a route then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Planning » route in sevens You can plan a route in advance before you drive it. You can save the route as part of your My Routes list, To plan a route in advances, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Search.
A pop-up menu shows a list of options, 7. Select Use as Starting Point. 8. Repeat the search sips to choose your destination, and then select the drive button in the Pop-up menu: Your routs is planned using your chosen starting point and destination. The estimated time of arrival is shown at the top of the route bar. Changing the starting point to be your current location 1. Slacks the starting point of the routs in the map view. 2. Select the pop-up menu button, A pop-up menu shows a list of options. 3.
Changing the starting point into a stop 1. Select the starting point on the route in the map view. 2. Select the pop-up menu bunion. A pop-up menu shows a list of options. 3. Select Change to Stop. Your route is replanted with the starting point changed into a stop. Finding & oor park To find a car park, do the following: 1. Select the Main Menu button to open the Main Menu. ® 2. Select Parking. Qo The map opens showing the locations of car parks.
You gan change the screen to show a list of car parks by pressing this bunion: If you want to change how the search is done, select the bunion to the right of the search box, You can then change where the search Is carried out, for example, to search near you or the whole map. 3. Select a car park from the map or the list. A pop-up menu opens on the map showing the name of the car park.
4. To plan a route to your chosen car park, select the drive button: Your navigation device plans a route then starts fo guide you to your destination. As soon as you start driving, the guidance view is shown automatically. Finding « petrol station To find a petrol station, do the following: 1. Select the Main Menu button to open the Main Menu. ® 2. Select Patrol Station. O, The map opens showing the locations of petrol! stations. if a routs is planned, the map shows petrol stations along your route.
& hallucinate i if you want to change how the search is done, select the bunion to the right of the search boot. You can then sangs where the search Is carried out, for example, to search near you or the whole map. 3. Select a petrol station from the map or the list.
4. To plan a route to your chosen petrol station, select the drive button: Your navigation device plans a route then starts to guide you to your destination. As soon as you start driving, the guidance view is shown automatically.