Installation Manual RP REA METER ipa © wp § HEH RTT ES I RPE AND YEN Hie “Pp
J i This product has been inspected ! Before installing the product, 1 and debugged by the factory to please be sure to remove Nia the best condition. Please do not ny sundries and sludge from the | dissembler and assemble it peripheral fo prevent sundries ! yourself. from blocking the product. % » TOOLS YOU WILL NEED Adjustable chimeric Phillips screwdriver Hig Wrench Two angle valves > Pipe pale Silicone substantially » INSTALLATION Prior to installation: Shut off water supply. Remove old faucet.
3. Brew the nit onto shrank navigating approximately between the ring arid the sink. 4, Tighten filing nuts with adjustable wrench, [o not over tighten! Insert the base of side spray and connect the hose to the side spray. 6. Put on washer and fitting nut. 7. Tighten Sry Hoa a SHE 8, Connect and tighten the supply hoses. 9.
7 | 12.527 9.29 5.63" @1.77" for] 8.07. @1.38 Orderings keep the appearance of product clean, bright and good performance, please take care of the product as follows; 1.Rinse with water only and dry with doff cotton cloth; 2. Use mild liquid and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect; 3.00 not use abrasive detergent, polish, emery doth, paper towel or scraper, ele; 4 Do not use acid cleaner, or cleaner and soap with insoluble gran ete; 5.