FCC ID: NUSTMW885A-2 Annex P User's Manual (Draft) User's Manual (Draft) TOOK INC. 2.
FCC Warning Information to the User This equipment has been tested and found to comply with the limits for a class # B-digital device pursuant to part {5 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral, pursuant to Part 15 of the FCC Rules.
3. Feature + Completely Covered Assembly is designed to Fully packaged in a PCMCIA Type 11 extended cover sot. + Support for 11, 5.5, 2 and 1 Megabit Per Second (Bps) Data Rates. * Supports the IEEE 802.11 Direst Sequence Specification * Driver Supports Mierosoft® Windows® 95 SORE, 98, 2000. #1 * Advanced RAKE Receiver Design with AGC. 1 Microsoft® and Windows® and Windows NT® aro registered trademarks of Microsoft Corporation 4. Specifications « Absolute Maximum Ratings Supply Voltage to 4.
. Installation @ The following work is done with not inserted in PC. @ Sextuplet in Driver Dis kl is executed. @ Please input the key to setting utility according to the instruction displayed on the serene, @ The message of the purport by which PC is rebooted is displayed. Please reboot PC. ® Please insert. in PC. ® The installation of the driver is automatically completed, @ The networks and communication channel and the communication mode are set. Please set the network according to the manual of OS.