Use and Care Manual

Bamboo Care and Tips
The best way to avoid mold on our bamboo products is to wipe them off after
each use. You do not have to get them completely dry, but running a towel over
the top and bottom will get rid of most of the water. The reason for this is that
ANY surface will eventually gather mold and stains if it is left covered in water.
Also, here are some cleaning tips, we recommend cleaning your seat with one of
the following techniques:
-Use a ph neutral floor cleaner or murphy’s oil soap to clean the seat, remove
the soap with a damp soft cloth and towel dry.
-You can also use a mixture of vinegar and water; add ¼ cup of vinegar to 1
quart of water. Simply wipe your seat down with a cloth that has been
dampened in the mixture. The vinegar smell dissipates naturally or you might
add an essential oil for a pleasant scent. We suggest lavender oil as it is
antiseptic and has a calming scent!
-You may also use a few drops of mild dish soap to a half-gallon of water. Use a
soft sponge or cloth dampened with the solution and wipe your seat down. A
soft toothbrush can be used for hard-to-reach spots.
-A few drops of linseed oil, or flax seed oil, on a dry cloth will add a shine to
your bamboo chair and help extend its life.
We do not recommend using abrasive cleaners or pads
to clean your bamboo products. They could strip the surface and cause your
seat to warp over time. We also do not recommend soaking your bamboo as
that could lead to mildew.
Using one of these cleaning methods will ensure that your ToiletTree
Products Bamboo Shower Seat will look beautiful for years to come.
!