Technical Specifications

ManualsBrandsTOGGLER ManualsAnchorsTOGGLER SnapSkru Self-Drilling Drywall Anchor, Pack of 20

Easy, secure, vibration-proof anchoring for medium loads!

•

Strongest

of all plastic toggle anchors

• Vibration & shock proof—won’t damage walls or ceiling

Used to install the sprinkler system in the Tokyo subway

• Can use a screw gun—anti-rotation fins

prevent spinning

•

Greatest

grip range for each anchor:

TA 1/8"-1/4" TC 5/8"-3/4" T35 1

/8" [35mm]

TB 3/8"-1/2" TD 1" [26mm] T39 1

/2" [39mm]

•

Greatest

screw range for each anchor:

#6 through #14 TA = #8 through #12

[

Ø3.5-6mm dia.] [Ø4-5.5mm dia.]

• All install in only a small 5/16" hole [Ø8mm]

• Pre-install

without the screw

• Key-activated

positive

locking system

• Corrosion-proof, nonmagnetic, nonconductive

Ultimate Load in Pounds

Ideal for Mounting:

For Medium Holding in:

Benefits:

1234

Anchor:

Tensile

Plywood 124 175 -

3/8" Drywall - 97 -

1/2" Drywall - 143 -

5/8" Drywall - 102* 159

Shear

Plywood 265 - -

3/8" Drywall - 126 -

1/2" Drywall 126* 167 -

5/8" Drywall - 214* 237

Grip range:

1/8"-1/4" 3/8"-1/2" 5/8"-3/4"

Drill diameter:

5/16" 5/16" 5/16"

Screw tested:

#8 x 1

/4" #8 x 1

/2" #8 x 1

/4"

• Drywall

• Gypsum board

• Plasterboard

• Greenboard

• Fiberglass

• Hollow-core doors

• Thin paneling

• Sheet metal

• Acoustic ceilings

• Masonite

panels

• Towel bars

• Window treatments

• Bath accessories

• Kitchen accessories

• Smoke detectors

• CO detectors

• Electric boxes

• Lighting fixtures

• Mirrors on hollow-core doors

• Signs

• Alarms

• Clocks

• Shelving

• Telephones

• Thermostats

• Marine hardware

• Speaker mounts

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Drill 5/16" diameter hole (Ø8mm).

Fold anchor in middle.

Insert anchor in hole and tap flush.

Only 3/4" (19mm) clearance

needed behind the wall. Only

1/2" (13mm) for the TA anchor.

Insert key to pop anchor open

behind hollow wall (not necessary

for thick or solid walls).

not

hammer key. Remove key.

Place item over anchor. Insert

screw and tighten until flush

with item—then stop.

Each anchor holds securely,

even if

it hits an unexpected solid, like a

stud or the door frame.

Plastic Toggle Anchors

* Used as wedge anchors [not toggled fully open] in walls thicker than the anchor’s grip range

TA 1/8"-1/4"

3-6mm

Hollow-core door

thin panel anchor

TB 3/8"-1/2"

9-13mm

Residential

drywall anchor

TC 5/8"-3/4"

16-19mm

Commercial

drywall anchor

SnapSkru

Self-Drilling Drywall Anchors

Fast & easy! ... Hear it “pop” & lock for extra security!

• Fast & easy to install—

drill needed

•

Strongest

holding of all self-drilling drywall anchors

• Holds securely in walls & ceilings

Unique locking action

resists

shock & vibration

• Audible “pop” indicates correct installation

• Built-in “positive stop”

resists

overdrilling

• Does

not

destroy the wall—can remove screw & item,

leaving anchor in wall for

reuse

• Works with

largest

range of screw sizes:

SPM MINI = #6, #8 (#6 preferred)

SP Regular = #6, #8, #10 (#8 preferred)

• Unique tip does

not

wander on wall...drills in accurately & easily

Ultimate Load in Pounds

Ideal for Mounting:

For Fast, Secure

Holding in:

Specifications:

Benefits:

231 4

Anchor:

MINI Regular MINI Regular

Tensile Shear

3/8" Drywall 57 57 105 108

1/2" Drywall 65 79 131 149

5/8" Drywall 95 135 175 178

Screw tested:

#6 x 1

/4" #8 x 1

/2" #6 x 1

/4" #8 x 1

/2"

3/8" through 5/8" [9.5-16mm]

• Gypsum board

• Drywall • Wallboard

• Plasterboard

• Bathroom accessories

• Window treatments

• Lighting fixtures

• Smoke detectors

• CO detectors

• Picture frames

• Mirrors

• Alarms

• Shelving

• Thermostats

• Electric boxes

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Drive anchor clockwise into

drywall until anchor stops flush

with wall.

Press tip of SnapSkru anchor into

drywall using #2 Phillips screw-

driver or screw gun.

Place item over anchor and insert

screw.

Tighten screw flush with item.

Screw “pops” open anchor, locking

anchor on wall.

UNC Metric

MINI Regular MINI Regular

Head diameter:

0.4" 0.6" 11mm 16mm

Screw sizes:

#6, #8 #6, #8, #10 Ø3.5, 4mm Ø3.5, 4, 4.5mm

Preferred screw:

#6 #8

Ø3.5mm Ø4mm

Screw length:

item + 1" item + 1

/4"

item + 25mm item + 32mm

Max. item thickness:

1/2" 3/4" 13mm 19mm

*with screw length:

/4" 1

/2"

32mm 38mm

Locked

on wall!

pop!

* For thicker items, use longer screw

SNAPTOGGLE

Heavy-Duty Toggle Bolts

Like having an extra pair of hands behind the wall!

• Strong—up to

2x the load

of an old-fashioned wing toggle

Solid metal channel resists vibration & shock

•

Save time—at least

6 minutes

per anchor v. wing toggles

Can use a screw gun; anchor does not spin

•

Save money—turn a 2-person job into a 1-person job

Use a shorter bolt (no need to carry a wing through the wall)

• New strap design

snaps off

flush

& does

not

break prematurely

•

Smallest

installation hole for each bolt size

• New golden plating is

7x more corrosion-resistant

• Reusable in same hole—remove bolt without losing the anchor

These results are for zinc-plated steel anchors. Stainless steel channels with stainless steel bolts held greater loads in concrete & in steel plate.

Long straps for roofing and for very thick walls.

NOTE:

10-24 = 3/16"-24

Bolt length

= Item thickness + wall thickness + 1/2" (13mm).

Ultimate Tensile Load in Pounds

Ideal for Mounting:

For Maximum Holding in:

Metric sizes available:

Benefits:

1234

Thread:

3/16"-24 1/4"-20 5/16"-18 3/8"-16 1/2"-13

Anchor:

BA BB BE BC BD

1/2" Drywall 238 265 270 275 275

5/8" Drywall 356 356 480 576 576

Concrete block 802 1,080

1,400

1,745 2,038

Steel plate 918 1,283 1,680 1,692 2,605

Drill diameter:

1/2" 1/2" 3/4" 3/4" 3/4"

Grip range:

/8"-3

/8"

/8"-3

/8"

/8"-2

/2"

/8"-2

/2"

/8"-2

/2"

Long strap code:

BAL BBL

Grip range:

2"-9

/2" 2"-9

/2"

• Cinder block

• Concrete block

• Gypsum board

• Drywall

• Plasterboard

• Composite panels

• Plaster

• Stucco

• Fiberglass

• Cement board

• Greenboard

• Flat panel TVs

• DSS antennas

• Lighting fixtures

• TV mounts

• Roofs & decking

• Marine applications

• Window treatments

• Heavy machinery

• ADA hardware

• Office furniture

• Hand rails

• Grab bars

• Partitions

• Heavy fans

• Sinks

• Cabinets

• Shelving

• Solar panels

• Garage doors

• Reinstallations

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Drill hole. Hold metal channel flat

alongside plastic straps & slide

channel through the hole.

Minimum clearance behind wall:

only 1 7/8" (48mm).

Hold ends of straps together

between thumb & forefinger and

pull toward you until channel

rests behind wall. Ratchet cap

along straps with other hand until

flange of cap is flush with wall.

Place thumb between straps at wall.

Push thumb side to side, snapping

off straps level with flange of cap.

Place item over flange. Insert bolt

and tighten until snug against

item, then stop.

Use machine screw or bolt to

match thread in metal channel.

Also available in

RoHS-compliant plating

or 304 stainless steel

Anchor:

BM5 BM6 BM8 BM10

Thread: M5 M6 M8 M10

Drill diameter:

13mm 13mm 19mm 19mm

Grip range:

10-92mm 10-92mm 10-64mm 10-64mm

Long strap code:

BM5L BM6L

Grip range:

51-240mm 51-240mm

Regular SP anchor

MINI

SPM anchor

• Stronger than larger anchors!

• Makes only a

tiny

1/4" hole

•

Small

0.4" head hides behind fixture

• Head sits

flush

on wall or ceiling

• Works with both #6

#8 screws

MINI SPM Anchor Benefits:

1/4"

1/2"

MPC_Catalog_2007_Rev6.QX6 10/18/07 1:53 PM Page 1

Summary of content (5 pages)

PAGE 1
MPC_Catalog_2007_Rev6.QX6 10/18/07 1:53 PM Page 1 ® ® ® SNAPTOGGLE Heavy-Duty Toggle Bolts SnapSkru Self-Drilling Drywall Anchors Like having an extra pair of hands behind the wall! Fast & easy! ... Hear it “pop” & lock for extra security! Easy, secure, vibration-proof anchoring for medium loads! 1 1 1 2 3 4 Drill 5/16" diameter hole (Ø8mm). Fold anchor in middle. Insert anchor in hole and tap flush. Only 3/4" (19mm) clearance needed behind the wall. Only 1/2" (13mm) for the TA anchor.
PAGE 2
ANCHOR SYSTEM Technical Bulletin SnapSkru® SELF-DRILLING DRYWALL ANCHORS The strongest, easiest-to-use self-drilling drywall anchor — The TOGGLER® SnapSkru self-drilling drywall anchor needs no drill and installs as quickly and easily as an ordinary self-drilling drywall “auger” anchor, but its unique “Snap Lock” feature provides the positive behind-the-wall locking and holding power of a toggle bolt.
PAGE 3
2 SnapSkru SELF-DRILLING DRYWALL ANCHORS Specifications — MINI Anchor [SPM] 0.25" (1/4") Ø6mm SPM 0.4" 11mm 1.25" (1-1/4") 32mm (W) Wall thickness Min. 3/8" (10mm) Max. 5/8" (16mm) #6 (Ø3.5mm) preferred #6 - #8 Ø3.5 - 4mm (T) Item thickness S S = Item thickness (T) + 1" (25mm) Item thickness (T) must be considered when selecting screw length (S).
PAGE 4
3 SnapSkru SELF-DRILLING DRYWALL ANCHORS Specifications — Regular Anchor [SP] 0.31" (5/16") Ø8mm SP 0.62" 15.9mm 1.65" (1-5/8”) 42mm (W) Wall thickness Min. 3/8" (10mm) Max. 5/8" (16mm) #8 (Ø4mm) preferred #6 - #10 Ø3.5 - 4.5mm (T) Item thickness (S) Screw length = T + 1 1/4" (32mm) T S S = Item thickness (T) + 1 1/4" (32mm) Item thickness (T) must be considered when selecting screw length (S).
PAGE 5
4 SnapSkru SELF-DRILLING DRYWALL ANCHORS Benefits • In 5/8" drywall the SnapSkru SP self-drilling drywall anchor holds over 135 lbs.* ultimate. This is 80% more than the highest load reported by other self-drilling drywall anchors. • In 1/2" drywall the SnapSkru SP self-drilling drywall anchor holds over 80 lbs.* ultimate. This is 60% more than the highest load reported by other self-drilling drywall anchors. • The SnapSkru SP self-drilling drywall anchor accepts #6, #8 and #10 screws.