User's Manual

QI wireless charging component Instruction Manual

Congratulations on your purchase of this wireless charger.

To ensure a long service life and optimal functionality of the product we recommend that you read

this manual carefully.

Package Content

1 Wireless Charger with built-in Type-C female input port

1 USB to Type-C cable

1 User Manual

Specifications

Input: DC 5V,2A/ DC 9V,1.67A

Output: DC 5V,1A/ DC 9V,1.1A

Charging Distance≤6mm

General information

. This charger works with all Qi-compatible devices (please make sure your device is

Qi-compatible)

. Devices are available with built-in or external wireless charging receivers.

. For normal operation, no weaker than DC 5V, 2A charger is required.

. For a fast wireless charging mode, use the Quick Charger 2.0/3.0 compatible charger and

compatible smartphones.

. This wireless charger can charge smartphones with non-metal protective case or silicone covers

that are no thicker than 6mm.

Instructions

1. Connect the wireless charger with the included or another good performance USB cable to the

wall charger and plug the charger into an electronic socket, the red LED light will light up.

2. Place the smartphone with the display facing up or another compatible device on the center of

the wireless charger or adjust the placement position until the charging process starts, the blue

LED light will glow continuously during the charging process.

If the wireless charger or the LED indicator light is not working properly, reconnect

USB charger to the wireless charger.

3. When the smartphone is fully charged, remove it from the wireless charger.

. When the charging is completed, your smartphone or another device will indicate that the

battery is full.

(check the smartphone’s battery status using the charging icon displayed on the screen)

4. To save energy, unplug the charger when not in use.

PAGE 1
QI wireless charging component Instruction Manual Congratulations on your purchase of this wireless charger. To ensure a long service life and optimal functionality of the product we recommend that you read this manual carefully. Package Content 1 Wireless Charger with built-in Type-C female input port 1 USB to Type-C cable 1 User Manual Specifications Input: DC 5V,2A/ DC 9V,1.67A Output: DC 5V,1A/ DC 9V,1.1A Charging Distance≤6mm General information .
PAGE 2
General usage tips . Do not place any metal objects between the smartphone and the wireless charger - The smartphone may not charge properly. . To ensure more effective charging, remove protective cases. . Charging time depends on battery capacity, phone input specifications, current phone energy consumption, phone position on the wireless charger, charging distance, etc. Possible causes of wireless charging problems . Your device is not compatible with the Qi wireless charging standard. .
PAGE 3
-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.