Quick Start Guide

QF3-KSZP02 V1.0
QF3-KSZP02 V1.0
USB Cable Power Adapter
Lens
Power
input
Status
light
Mic
Light
sensor
Lens
FRONT BACK
RESET button
MicroSD slot
RESET
(SD card not included)
BOTTOM
Tobicam x1 USB Cable x1 Power Adapter x1
Plug in Tobicam to a
power outlet and allow it
10 secs to power up fully.
1
Indoor use only
BOTTOM
RESET
button
RESET
Tobicam
Status
light
BACK
Power
input
While the camera is
powered, press and hold
RESET button until you
hear a voice prompt.
2
Download Tobicam App
3
Use Tobicam App to
create a new account
and follow steps to
activate camera.
4
In the box
Tobicam Pigeon V1
LIGHT INDICATIONS
Solid yellow
Camera is powered on and initializing
Flashing yellow
Camera is ready to connect
Flashing yellow & blue
Connection is in progress
Flashing blue
Camera is finishing setup
Solid blue
Camera is working properly
FCC Warning:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the User’s authority
to operate the equipment. This device
complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
ncluding Interference that may cause
undesired operation.
FCC Radiation
Exposure Statement:
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
minimum distance 20cm between the
radiator & your body.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
Only use the power supply provided
QUICK START GUIDE
Looking for help?
Tutorial videos
www.youtube.com/tobicam
Troubleshooting and FAQs
www.tobicam/support
Contact us
[e-mail]
A subsidiary of
Tobi Tribe Inc.
- Dual-lens & Dual-chip
- 1080P F2.0 210° Wide View Angle
- Dual 360° Panoramic View
- Four-windows Real-time Monitor
- 3 x 850nm IR LED
- Two-way Vioce
- Support VR Mode View Angle
- Support MicroSD Card Storage
Video 1024 x 2048 FHD
Frame Rate 10FPS
Lens 2 x F2.0 210° Wide View
Storage Support MicroSD Card
Neight Vision 3 x 850nm Infrared 5M
Security Triple Data Encryption
Connect Wi-Fi 802.11b/g/n 2.4Ghz
Package weight 0.200 kg
Power Input DC 5V/2A
Size 36mm x 36mm x 101mm
Specs
The RESET button is on
the bottom side of the
camera.