Quick Start Guide Unboxing TG200 POS unit Hand strap Quick start guide 5.2V/ 2A adapter Hardware Specification CPU 4x A73 2.0GHz 4x A53 2.0 GHz OS Android Memory 4 GB LPDDR4X/16 GB Flash Display 6.36” display Touch Panel 5-Point Capacitive multi-touch Side key Power button: Power on/off Volume UP Volume DOWN LED 3 LED Speaker 1x 1W loudspeaker Mic 2 Microphones Card Reader Credit Card reader device (FCCID: 2AB7X-CHC2XBT) connected and covered by protective case.
Unit Appearance Setup To start using the TG200 for the 1st time 1. Charge the TG200 2. Power on the TG200 Charging the TG200 battery Using pogo charging cable to charge TG200 Step 1: Attach the pogo cable to TG200 Step 2: For battery charging, insert pogo USB connector into Toast approved adapter Important Charging related information Power Supply Input: AC 100-240V, 50/60Hz; output: 5.2V/2A, Toastprovided Battery pack 3.8V, rechargeable Li-ion, Toastproprietary Charging time Approx.
Wireless connection The TG200 support 802.11 a/b/g/n/ac WLAN function at 20/40/80 MHz bandwidth and BLE V4.2. WLAN connection Wi-Fi can only be used when it connects with home Wi-Fi Access Point (AP) or a free unsecured Wi-Fi hotpot. Scan available WLAN Under “Wireless & networks”, tap “Wi-Fi” to turn it on. After a moment, your Wi-Fi network list should populate. If you need to rescan for available networks, tap "scan". Connect to WLAN Your TG200 lists the networks it finds within range.
Certification: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence‐exempt RSS standard(s).
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
