INSTRUCTION MANUAL Digital Wireless transmitter WM-D5300 Thank you for purchasing TOA’s Digital Wireless Transmitter. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS .......................................................................................................... 3 2. GENERAL DESCRIPTION ........................................................................................................ 5 3. FEATURES .................................................................................................................................. 5 4. HANDLING PRECAUTIONS ................................................................
1. SAFETY PRECAUTIONS • Before use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety. • After reading, keep this manual handy for future reference. WARNING Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required.
2. GENERAL DESCRIPTION The WM-D5300 is a digital wireless transmitter to be used with the optional microphones, exclusively for speech applications. The transmitter is specially designed to be used in conjunction with TOA's WT-D5800 digital wireless receiver. 3. FEATURES • Employs the PLL-synthesizer system. • TOA's unique digital audio processing technology ensures high quality sound. • Digital transmission is highly resistant to radio interference and noise, enabling clearer, more stable communication.
5.
1. Power switch [ON/OFF] Power can be turned on by sliding the power switch to the ON position, while it can be turned off by sliding it back to the OFF position. 2. Battery checker (green/orange/red) Lit: Power ON Unlit: Power OFF* The remaining battery power is represented by the color of the indicator. Green: Battery power is at full charge. Orange: Battery power depletion has started. Red: Battery power is almost depleted, and battery replacement is required.
6. PREPARING BATTERIES The WM-D5300 can operate on both the optional rechargeable battery or replaceable dry batteries. Please carefully read the corresponding sections for correct use. 6.1. Battery Insertion Step 1. Turn off the power switch. 2 L H Step 2. Hold the transmitter body and slide the battery cover to the right to remove it. L H Step 3. Insert an AA battery according to (+) and (–) indications on the battery compartment.
6.3. When Operating on Rechargeable Battery CAUTION Do not charge the unit with an alkaline dry battery installed. Charge the dedicated rechargeable battery*. Failure to observe these instructions could cause fire or personal injury due to a bursting battery. * The optional TOA WB-2000-2 (package of 2). Notes • When operating on rechargeable batteries, the optional BC-2000 Battery charger is required. • For rechargeable batteries, be sure to use the optional WB-2000-2 (package of 2).
7. OPERATION 7.1. Preparing Microphone The following optional microphones can be used. Purchase one of them separately. Note Be sure to switch OFF the transmitter's power switch before connecting or disconnecting the microphone element. A loud noise may be produced if this is done with the power switched ON. [YP-M5300 Lavalier Microphone] Tie-clip attachment Clip 1.3 m in length Plug lock ø3.5 mm Set the Microphone's narrow portion in the tie-clip's holder.
7.2. Using Transmitter Step 1. Plug the microphone's plug into the input connector as illustrated. Step 2. Confirm that the wireless microphone and the wireless receiver are identical in the bank and channel number. If not identical, turn the power switch to the OFF position, then set the bank and channel numbers to the same ones as the receiver. Step 3. Turn the Power switch to the ON position. Then, confirm the battery checker will light green or orange. Step 4.
8.2. Performing Encryption Settings To enhance security, the WM-D5300 is provided with an encryption setting function that prevents leakage of transmitted information. This function also has the advantage of eliminating radio interference if enabled. Before enabling the encryption setting, be sure that bank and channel settings are completed first. Note In addition to the WM-D5300, the WT-D5800 Digital Wireless Receiver also requires setup.
8.2.2. Performing encryption settings [Switching the Encryption function from OFF to ON] See also the instruction manual enclosed with the WT-D5800 receiver. Step 1. Enable the receiver's encryption function. Step 2. With the battery cover removed, switch ON the transmitter power switch and confirm that the Encryption indicator is unlit. If the indicator is lit, switch encryption from ON to OFF (see p. 14). Unlit Step 3. Switch OFF the transmitter power switch. Step 4.
[Switching the Encryption function from ON to OFF] Step 1. With the battery cover removed, switch ON the transmitter power switch and confirm that the Encryption indicator is lit. Lit Step 2. Switch OFF the power switch. Step 3. Switch ON the transmitter power switch while holding down the Encryption setting switch. Note Do not switch OFF the transmitter power switch during setting. Unlit Step 4. Confirm that the Encryption indicator has extinguished, then release the Encryption setting switch.
8.4. Performing Transmission Output Changeover Switch Settings Transmission can be set for either of two outputs: ‘H’ (10 mW) or ‘L’ (1 mW). The switch is factory-preset to the ‘H’ position. Note Be sure to turn the transmitter’s power switch OFF before performing settings. Step 1. Confirm that the power switch is turned OFF, then remove the battery cover. Step 3. Securely replace the battery cover. H L H L Step 2.
9. CONVENIENT FUNCTIONS (Microphone Sensitivity Selector Switch Settings) Microphone sensitivity can be set to "0 dB" (H) or "−10 dB" (L). Notes • Switch OFF the power switch when selecting the sensitivity. • Avoid positioning the microphone too close to the mouth or speaking in a loud voice, as the sound could become muddled and difficult to understand. • Sensitivity is factory-preset to "L." Step 1. Confirm that the power switch has been switched off, then remove the battery cover. H L Step 2.
10. Specifications Frequency Range 576 – 606 MHz for USA/Canada Channel Selectable 160 channels (The number of channels may differ from country to country.
Number of DoC: 16113002 DECLARATION OF CONFORMITY We: TOA Electronics Europe GmbH Süderstraße 282, 20537 Hamburg, Germany as the authorised representative of the Manufacturer: TOA Corporation 7-2-1, Minatojima-nakamachi, Chuo-ku, Kobe, Japan 650-0046 declare, under our sole responsibility, that the product Product Name: DIGITAL WIRELESS TRANSMITTER Model Number: WM-D5300 conforms with following specifications: EMC: ETSI EN 301 489-1: V1.9.2 (2011-09), ETSI EN 301 489-9: V1.4.
COMPLIANCE STATEMENT TO WM-D5300 AT DE Österreich Deutschland België BE Belgique CH Schweiz DK Danmark ES España FI Suomi / Finland FR CH France Suisse GB Greate Britain GR Ελλαδα IT CH Italia Svizzera NL Nederland NO Norway Hiermit erklärt TOA Electronics Europe GmbH die Übereinstimmung des Funkmikrofon mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG.
PT Portugal SE Sverige 20 TOA Electronics Europe GmbH declara que este Microfone Emissor está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Härmed intygar TOA Electronics Europe GmbH att denna Trådlös mikrofon står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Intended use of WM-D5300 Der Gebrauch dieses Funkmikrofons für andere Zwecke als zur Übertragung eines Tonsignals an einen passenden Funkempfänger ist nicht zulässig. AT CH DE Österreich Schweiz Deutschland WICHTIGER HINWEIS ! Dieses Gerät arbeitet auf in der europäischen Gemeinschaft (EU) nicht harmonisierten Frequenzen. Abhängig vom geografischen Gebiet dürfen nur bestimmte Frequenzen legal mit oder ohne Autorisierung/individueller Lizenz entsprechend der beigefügten Frequenztabelle genutzt werden.
Es ilegal utilizar este micrófono inalámbrico para cualquier otro propósito que no sea transmitir una señal de audio a su correspondiente receptor o módulo sintonizador. ES España ¡ AVISO IMPORTANTE ! FI Suomi / Finland HUOMIOITAVAA ! GB IE Greate Britain Eire IMPORTANT NOTICE ! This device makes use of frequency bands which are not harmonised throughout the European Community (EU).
È illegale utilizzare questo radiomicrofono per qualsiasi altro scopo che non sia la trasmissione di un segnale audio ad ogni suo ricevitore o modulo sintonizzatore. Questo prodotto utilizza bande di frequenza che non sono totalmente armonizzate in tutta la Comunità Europea (EU). Dipendentemente dall’area certe aree geografica certe frequenze possono essere usate legalmente con o senza autorizzazione / licenze individuali come stabilito nella tabella delle frequenze.
Traceability Information for Europe Manufacturer: TOA Corporation 7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan Authorized representative: TOA Electronics Europe GmbH Suederstrasse 282, 20537 Hamburg, Germany URL: http://www.toa.
