Z 1 TOA OPERATING INSTRUCTIONS UHF WIRELESS MICROPHONE WM-5320 WM-5320A WM-5320TH Thank you for purchasing TWA's UHF Wireless Microphone. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. TABLE OF CONTENTS 1. SAFETY PRECAUTIONS... 2 2. GENERAL DESCRIPTION 3. FEATURES sos 2 4. HANDLING PRECAUTIONS 3 5. NOMENCLATURE sss 3 6. BATTERY INSERTION 5 7. CHANNEL NUMBER SETTING 6 8. OPERATION cocoa: 6 9. OPERATIONAL HINTS eases chess 7 10.
1. SAFETY PRECAUTIONS « Be sure to read the instructions in this section carefully before use. » Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. = We also recommend you keep this instruction manual handy for future reference.
+ Operates on a single AA battery. + Employs a built-in antenna. + The state of battery consumption can be displayed on the tuner's indicator when the unit is used in conjunction with the optional WT-5800, WT-6805 or WT-5810 Wireless Tuner. 4. HANDLING PRECAUTIONS + Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in unit failure. + Never open nor remove the unit case io modify the unit.
Neck strap attachment * Neck strap (supplied with the WM-5320 and WM-5320TH) [Microphone unit] (WM-5320 only) Clip” 130 cm in length ~~ Plug lock 93.
[Headset] (WM-5320A only) [Headset] (WM-5320TH only) Adjustable band © Goose neck Windscreen Plug lock ~~ Goose neck Windscreen Plug lock: 3 $ O e3.5 mm ] _.e35mm * Microphone “Microphone [waist pouch] (WM-5320A only) 6. BATTERY INSERTION Step 1. Tum off the power switch, Step 3. Insert an AA battery according to and indications on the battery compartment. Step 2. Remove the battery cover from the unit. Slide the battery cover in the direction Step 4. Replace the removed battery cover.
7. CHANNEL NUMBER SETTING Step 1. Tum off the power switch, and then remove the battery cover. Step 2. Using the supplied screwdriver, set the Channel setting switch pointer to the desired channel number. Step 3. Replace the battery cover. Note Make sure that the wireless microphone is identical fo the wireless tuner in the channel number. Should the microphone’s setting differ from that of the tuner, the tuner does not receive the microphone signal. 8. OPERATION Step 1.
9. OPERATIONAL HINTS « The microphone's service distance is 3 — 120 m. When the microphone user moves in a facility, signal dropouts {momentary losses of signal reception) may be encountered. These dropouts are caused by the building's architectural designs or materials which block the travel of or reflect the radio signal. If this occurs, the user needs to change locations for better signal reception.
12. SPECIFICATIONS [WM-5320] Microphone Element Electric condenser type, omnibus-directional patter Modulation Frequency modulation Frequency Range 836 — 700 MHz, UHF Electable Channel 84 frequencies {the number of channels may differ from country fo country.) RF Cancer Power Less than 50 mW Tone Frequency 32.768 kHz Oscillator PLL synthesized Murmuring Input Level 110 ¢B SPL.