Instruction Manual

ManualsBrandsToa ManualsMicrophonesST-310F

1. SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully

before use.

• Make sure to observe the instructions in this manual as

the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual

handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used

in this manual to prevent bodily injury and property

damage which could result from mishandling. Before

operating your product, read this manual first so you are

thoroughly aware of the potential safety hazards as well as

understand the safety symbols and messages.

When Installing the Unit

• Avoid installing or mounting the unit in unstable

locations, such as on a rickety table or a slanted surface.

Doing so may result in the unit falling down and causing

personal injury and/or property damage.

When Installing the Unit

• Avoid placing the unit in a doorway or other high traffic

area as people may trip on the equipment and cords, or

be injured by falling objects.

When the Unit is in Use

• Do not place a heavy object on the stand, because the

object may fall off or the stand fall down, potentially

causing a personal injury. The maximum weight of the

microphone that can be mounted to the stand is 2 kg.

2. HANDLING PRECAUTIONS

• Do not get hold of the upper shaft when moving the

stand. The stand may become distorted and its height

cannot be adjusted smoothly. Hold the lower shaft to

move the stand.

• Do not try to rotate the grip because it is designed not to

rotate. The upper shaft cannot be fixed if the grip is

rotated by force.

ST-310FMICROPHONE STAND

INSTRUCTION MANUAL

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

WARNING

CAUTION

WARNING

CAUTION

Thank you for purchasing TOA's Microphone Stand.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

Thread adapter

Lock nut

Stand thread

Grip

Upper shaft

Lower shaft

Projection

(rotation stopper)

Cable clip

(2 pieces)

Base

T-bolt with washer

3. NOMENCLATURE

Summary of content (2 pages)

PAGE 1
INSTRUCTION MANUAL MICROPHONE STAND ST-310F Thank you for purchasing TOA's Microphone Stand. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. SAFETY PRECAUTIONS 2. HANDLING PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
PAGE 2
4. ASSEMBLY 5. HEIGHT ADJUSTMENT Step 1. Aligning the lower shaft's projection with the corresponding hole in the base, insert the lower shaft into the base. Then, tighten T-bolt from the back of the base. The height can be adjusted by simply raising or lowering the upper shaft. Lower shaft Projection (rotation stopper) (Projection) hole Base T-bolt (with washer) 6. COMPLETED ASSEMBLY FIGURE Step 2.