Manual

ManualsBrandsToa ManualsMicrophonesRM-1100

INSTRUCTION MANUAL

REMOTE MICROPHONE RM-1100

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ............................. 2

2. INSTALLATION PRECAUTION ................... 3

3. GENERAL DESCRIPTION ........................... 3

4. FEATURES ................................................... 3

5. NOMENCLATURE AND FUNCTIONS ......... 4

6. OPERATIONS .............................................. 5

7. HOW TO USE

THE VOLUME CONTROLS ....................... 6

8. NAME LABEL REPLACEMENT ................ 6

9. CONNECTIONS ......................................... 6

10. SPECIFICATIONS ...................................... 8

Summary of content (8 pages)

PAGE 1
INSTRUCTION MANUAL REMOTE MICROPHONE RM-1100 TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................. 2 2. INSTALLATION PRECAUTION ................... 3 3. GENERAL DESCRIPTION ........................... 3 4. FEATURES ................................................... 3 5. NOMENCLATURE AND FUNCTIONS ......... 4 6. OPERATIONS .............................................. 5 7. HOW TO USE THE VOLUME CONTROLS ....................... 6 8. NAME LABEL REPLACEMENT ................ 6 9.
PAGE 2
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
PAGE 3
CAUTION Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. When Installing the Unit • Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire.
PAGE 4
5. NOMENCLATURE AND FUNCTIONS [Top panel] [Bottom panel] 12 1 2 16 3 4 5 6 7 15 11 10 9 8 1 Power indicator Lights when the power is switched on. 2 Busy indicator Lights when the rack system or other remote control unit is in use. 14 13 9 All-zone button Turns on or off all-zone broadcast. 10 Zone selector buttons Turn on or off broadcast to the selected zone.
PAGE 5
6. OPERATIONS • Broadcast can be made only when the zone selector or all-zone broadcast button is pressed and the broadcast indicator lights. • While the main rack system or other remote control unit is in use, the busy lamp remains lit. In such cases, wait till the indicator is extinguished. • First-in-first-out priority or Individual unit priority can be set. It is impossible to make broadcast when other equipment given higher priority is in use.
PAGE 6
7. HOW TO USE THE VOLUME CONTROLS 1. Using the Phillips screwdriver, rotate the microphone volume control ( 13 ) and AUX input volume control ( 14 ) on the bottom surface fully counter-clockwise. 2. Making an announcement from the microphone, rotate the microphone volume control clockwise to adjust the volume to an appropriate level. 3. Making broadcast from equipment connected to the AUX input, rotate the AUX input volume control clockwise to adjust the volume to an appropriate level. 8.
PAGE 7
Connect the remote control output to the PP-025B Pre-amplifier Panel's line input jack. Use the twin shielded cable for connection. H C E Priority setting First-in-first-out priority: Connect the First-in-first-out terminal of one remote control unit to the same terminal of another. Up to five units can be connected for the FIFO priority function.
PAGE 8
10. SPECIFICATIONS Power Source Current Consumption Output Microphone AUX Input Chime Speaker Control Dimensions Weight Finish Connection Cable 24 VDC 130 mA 0 dBV, 600 Ω, balanced Electret condenser type gooseneck microphone (with windshield) -20 dBV, 100 kΩ, unbalanced Sounds a chime installed in the main rack. 10 zones + All-zone broadcast 274 (w) x 62 (h) x 155 (d) mm (Microphone excluded) 1.