User Manual

Thank you for purchasing TOA's Chime Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
EC-100MCHIME MICROPHONE
INSTRUCTION MANUAL
1. GENERAL DESCRIPTION
TOA's EC-100M Chime Microphone features a soft, comfortable chime tone suited for paging announcements.
Its operation is as easy as those of normal microphones.
2. FEATURES
Pre-paging chime of 4-tone up, and post-paging chime of 4-tone down.
The microphone can be turned on or off by simply pressing a button.
Long battery life. Two R14P batteries keep the unit in operation for about 2 years (provided the unit is used 150 times
per day).
3. BEFORE USING THE UNIT
Prepare two R14P batteries to operate the unit.
4. NOMENCLATURE AND FUNCTIONS
1. Microphone
Close-talk type unidirectional dynamic microphone.
The gooseneck shaft facilitates positioning of the
microphone for the optimum acoustic effect.
2. Microphone ON Key
Pressing this key sounds a 4-tone chime (up) and turns
on the microphone.
3. Microphone OFF Key
Pressing this key sounds a 4-tone chime (down) and
turns off the microphone.
4. In-Use Lamp
Lights when the microphone is turned on. If this lamp
does not light even when the Microphone ON Key is
pressed, replace the batteries.
5. Output Jack
Chime tone and microphone signals are provided from
this 600 Ω, unbalanced output jack. Using the supplied
cord, connect this jack to an amplifier.
6. Battery Compartment
Place an R14P battery. (2 places)
7. Chime Volume Control [CHIME VOL.]
Turning the control clockwise using the supplied
screwdriver will increase the chime volume.
O
N
O
F
F
Windscreen
(accessory)
]raeR[]poT[
[Bottom]

Summary of content (2 pages)