User's Manual

ManualsBrandsToa Electronics ManualsPro AudioWT-5810 Space Diversity 16-Channel Wireless Tuner

OPERATING INSTRUCTIONS

WIRELESS TUNER WT-5810

1. SAFETY PRECAUTIONS ........................... 2

2. GENERAL DESCRIPTION ......................... 3

3. FEATURES ................................................. 3

4. HANDLING PRECAUTIONS ...................... 3

5. NOMENCLATURE AND FUNCTIONS

Front ............................................................ 4

Rear ............................................................. 4

6. OPERATION ............................................... 5

7. CHANNEL NUMBER SETTING ................. 6

8. HOW TO CHECK AND DEAL

WITH INTERFERENCE

8.1. Order of Actions (Action Flowchart) ..... 6

8.2. Checking Ambient Signal Condition ..... 7

8.3. Reducing Radio Interference

by the Squelch Control ......................... 7

8.4. Channel Detection ................................ 8

9. SPECIFICATIONS ...................................... 8

Accessory .................................................... 8

Thank you for purchasing TOA's Wireless Tuner.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
OPERATING INSTRUCTIONS WIRELESS TUNER WT-5810 TABLE OF CONTENTS 1. 2. 3. 4. 5. SAFETY PRECAUTIONS ........................... 2 GENERAL DESCRIPTION ......................... 3 FEATURES ................................................. 3 HANDLING PRECAUTIONS ...................... 3 NOMENCLATURE AND FUNCTIONS Front ............................................................ 4 Rear ............................................................. 4 6. OPERATION ...............................................
PAGE 2
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
PAGE 3
• The socket outlet shall be installed near the equipment and shall be easily accessible. • Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock. When the Unit is in Use • Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or property damage.
PAGE 4
5. NOMENCLATURE AND FUNCTIONS [Front] 2 3 4 5 6 7 8 1. Power switch Press this switch to turn the power on, and press it again to turn off the power. 9 10 1 2 6. Squelch control Adjusts the squelch level. 7. RF check button Switches off the squelch for monitoring the receiving frequency. 2. Rod antennas Raise both antennas at 45° outwards from a vertical line. When carrying the unit, be sure to fold down both antennas to prevent them from break. 8.
PAGE 5
6. OPERATION Reception lamps Channel number display 3 1 Step 1. Turn the power on, and the Channel number display lights to indicate the channel number. Step 2. Set the wireless microphone switch to the ON position. The reception lamp lights when the tuner receives the same frequency signal. Step 3. Adjust the volume control. The output level increases as the volume is turned clockwise, and decreases as turned counterclockwise.
PAGE 6
7. CHANNEL NUMBER SETTING Step 1. Press the Set key for about a second until the displayed channel number flashes. Step 2. Select the desired channel number with the NEXT key, and press the Set key for about a second until the flashing number turns to steady light. Tip Continuous or each depression of the NEXT key permits the display to cycle through the channel numbers. Channel number display 12 8. HOW TO CHECK AND DEAL WITH INTERFERENCE 8.1.
PAGE 7
8.2. Checking Ambient Signal Condition 8.2.1. What is the "squelch"? In FM receivers, such as a wireless tuner, big noise is produced at the output when incoming signals are weak or when no signal is present. When the signal received is lower than a certain level of signal strength, by silencing the output, the noise can be suppressed. It is a squelch circuit that achieves this. An RF check button is provided to permit check of a disturbing wave when the unit is interfered with during its use.
PAGE 8
.4. Channel Detection Step 1. Press the Set key and the Next key at the same time for over a second. Channel detection begins, and an idle channel number is indicated flashing on the channel number display. Step 2. Press the Next key to select the channel. Step 3. To set the channel to the unit, press the Set key for over a second until the flashing number turns to steady light. 9.