3-IN-1 Magnetic Wireless Charger User Manual
Product Introduction The product is a 3-in-1 wireless charging pad, preferred smart chip , and supports mobile phones、smart watches,earphones,typec output is also supported . Achieve high efficiency, stable performance, put it on and charge, easily enjoy wireless charging technology life. It can also wirelessly charge mobile phones or other electronic devices that support Qi standard.
Specification Input: 5V2A 9V2A 12V1.5A Output: 5W/7.5W/10W/15W(Smart Phone);5W (Earphone); 2.5W (Smart Watch);10W(Type-c) Conversion Efficiency: ≤85% Working frequency: 115-205khz/326.5kHz Materials: PC Size: 125*65*25mm Weight: 165g Color: Black /White Transmission Distance: 2-6mm Precautions 1.
Safety Tips 1.Do not disassemble the product or in fire,water, and avoid causing ashort circuit. 2.Do not place the product in extremely hot, humid or corrosive environments, to avoid damage to the product. 3.Do not give children to play, in order to avoid unnecessary accidents. FAQ and Solution 1.My device is hot while charging, is it normal? --If you don't charge your device in a good charging area, the heat dissipation may not good and it will cause your phone hot during charging.
--The product wireless charger emits non-ionizing radiation which is not harmful to humans. Warranty We provide all our customers 12 months warranty from the date of purchase. FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.