Tinysc Microscopic Camera User Manual Hi,Read me before you explore the world with TinyScopeCAM English
Inventory 3 5 1 4 2 6 7 1 TinyScope Microscopic Camera x1 2 WiFi Box ×1 3 Dropper x2 4 Petri Dish ×2 5 Date Cable x1 6 Adaptor ×2 7 Biological Slide x4 8 7 Cleaning Cloth x1 8 User Manual (warranty card)x1 Storage Bag x1 Note: The package and contents in the picture are only for reference. It should be based on actual objects.
Product Specification 4 5 2 1 3 1 Plan apochromatic objective 2 Illumination module 3 Type-C data cable interface 4 Magnetic cover plate (bright field illumination side) 5 Magnetic cover plate (dark field illumination side) Note: The two sides of the magnetic cover plate shown in the figure are for reference only, and the structural shape of the functional area is subject to the actual object.
User Tutorial(Observe Opaque Objective) Connect TinyScope CAM to Android phone 01 Download [TinyScope] APP. 02 Open [TinyScope]APPClick on“ 03 04 ”icon. Click on[OTG];then click on[OTG test] to determine whether your phone supports OTG function. If your phone supports OTG function, please click on [OTG tutorial] again to match your mobile phone brand and follow the step to turn on [OTG] function.
05 Android phone Light Guide module Plug the adaptor into the USB port of the data cable (then both ends of the data cable are Type-c ports). Plug two ends of the data cable that has been connected into the por t of your smar t phone and TinyScopeCAM respectively. After successful connection, the light guide area of this product will illuminate. 06 07 08 09 Your phone will pop up a window [Please select an application for the USB device]; choose [TinyScope].
For Android version 10 or above please note In March 2020, the official Android system released the relevant security patch to solve the problem:the early version of Android 10 cannot correctly request USB device permissions. If you have not installed the patch, it may cause a black screen while using our APP. We strongly recommend that you install the patch.
Connect TinyScope CAM to iPhone 01 WiFi Box Connect TinyScope CAM with WIFI module. 02 03 04 05 Long press the button to open the WIFI image transmission module; then the indicator light is on,and wait for 3S to 5S. Open the WIFI connection selection interface on your iPhone; connect to the WIFI named [ScopeCAM_XXX]; and the initial password is 12345678. Open the TinyScope App on iPhone; select the interface for the microscope camera,and then the view of TinyScope CAM displays in real time.
Connect TinyScope CAM to PC (Windows/Mac OS) Windows : 01 02 03 Adjust the data cable to USB/Type-C (The ends of the data cable should be USB and Type-C port. If it have already connected with the adaptor,please remove it). Search [Camera] in Windows 10 (Enter Camera in the search bar at the bottom of the desktop). Click to open [Camera] application.
Petri dish The thickness of the glass bottom in the center of the petri dish is 0.15-0.20mm. The sample should be as close to the bottom as possible when it is placed in the groove. The observation depth of field of the microscope camera is 0-0.15mm above the glass surface of the petri dish. Instructions 01 02 03 Use the dropper to pick up the liquid sample and squeeze it out into the middle of the center groove of the petri dish.
03 Please ensure that the surface of the observed object is close to the bottom of the petri dish to avoid unfocusing. Observe Biological Slides The two opposite sides of magnetic cover plate are bright field side and dark field side, respectively. Choose the dark field side-the black side when observing with a liquid sampler,while choose the bright field side-the white side when observing biological slides.
03 Adjust the position of the slide/liquid sampler so that the center transparent part is in the center of TinyScopeCAM lens 04 Select bright field side or dark field side, and aim the center concave part to TinyScopeCAM lens; 05 Cover the magnetic cover plate 10
Problems and Solutions Blurred image displayed on your phone after successful connection Slightly move TinyScopeCAM up and down to adjust the distance between the lens and object; The lens is stained, please observe after wiping the lens according to the safety instructions in this manual. The image is unclear when observing the slides/with liquid samplers in bright or dark field illumination.
Multiple Working Modes Observe objects with rugged surface (insects, flowers, etc.). You can adjust the distance between the lens and the object by slightly moving the product towards or a way from the object. When observing soft or humid surface objects (such as skin, towels, ice cubes, etc.), you can add a clean cover slide (0.17mm thick) between the lens and the object to be observed, and the cover slide can be purchased by yourself.
Safety Instructions Do not disassemble or refit the product for any reason; otherwise the failure caused is not covered by the warranty, and you bear all these safety responsibilities. Please do not let the product directly contact with liquid, for neither the lens nor the body of TinyScopeCAM is waterproof. The device should be kept in the temperature neither too high (above 60°C ) nor too low (below 0°C). Do not contact the lens and LED light guide area with hard and sharp objects to avoid damage.
Product Parameters Pixel 1300W Optical Resolution 2μm Focusing Range 0-0.25mm Light Source LED Interface USB2.0 Power supply 5V USB DC Dimension 69.
Material Safety Data Sheet Toxic and harmful substances or elements Parts Name Pb Lens Module Hg Cd Cr(VI) PBB PBDEs × Plastic Par ts Metal Par ts Circuit Board ssembly × Wire × Flannel :indicates the content of this toxic and hazardous substance in all homogeneous materials of this part is under the limit requirement stipulated in the "Requirement Standard for Limits of Toxic and Hazardous Substances in Electronic Information Products" (SJ/t11363-2006).
WiFi Box User Manual 18
Introduction WiFi Box is for connecting USB camera to terminals (such as smart phone, tablet, and PC) through WiFi. After the connecting, users can use TinyScope app to control the USB camera wirelessly and capture images and videos. WiFi Box supports 3 terminals at most for simultaneous accessing.
Inventory 1 WiFi Box ×1 2 User Manual ×1 3 Warranty card ×1 Product Specification 2 1 3 1 On/off button Press to turn on/off the WiFi Box. 2 WiFi indicator light Blue: WiFi Box is working. If not lighting,please check whether WiFi Box is off or battery exhausted. 3 Power indicator light Green:Fully charged. Red:In charging or power less than 15%. When the light is red in the uncharged state, showing that the power is less than 15%, the WiFi may be disconnected or the image may flicker.
4 4 Heating vent 5 5 USB-A port Using WiFi Box to connect product, please connect the data cable’s USB-A port here. 6 6 USB Type-C Port Connect the data cable USB Type-C port here for charging.
Operation please follow the step below: 1: Connect the USB camera to the USB-A port of Wifi Box (Figure 5 ). 2:Connect the USB Type-C Port of the other end of the data cable to the USB camera (Figure 6 ). 3: Press the on/off button, when the WiFi indicator light become blue, the WiFi Box starts working. 4: Turn on your smart phone’s WiFi, Find [ScopeCAM_XXX] and connect it.The initial password is 12345678. 5: After successful connection, open the [TinyScope] APP.
3: Do not place the device at the temperature(above 40 °C or below -10 °C). 4: The product contains small parts, please do not swallow it. 5: If the body is dusty and oily, please wipe it with a dry cleaning cloth.
Material Safety Data Sheet Toxic and harmful substances or elements Parts Name Pb Circuit Board ssembly Hg Cd Cr(VI) PBB PBDEs × Plastic Parts :indicates the content of this toxic and hazardous substance in all homogeneous materials of this part is under the limit requirement stipulated in the "Requirement Standard for Limits of Toxic and Hazardous Substances in Electronic Information Products" (SJ/t11363-2006).
Tinysc Email Address:service@cvgc.cn Company Website:https://www.tinyscope.