Tineco Camera & Speaker Kit Instruction Manual
CONTENTS 1. Important Safety Instructions 01 2. Product Components 03 3. Using your Camera & Speaker 04 4. Specification 10 5. Troubleshooting 11 6.
Important Safety Instructions WARNING - To reduce the risk of fire, electric shock, or injury: 1. Read the manual carefully before use and keep it for future reference. 2. Only use the provided or certified USB cable for charging. 3. Store and use this product at room temperature. 4. Do not expose this product to rain or moisture. 5. Do not throw the product to avoid falling damage. 6. Do not disassemble, repair or modify this product yourself. 7. The product has a built-in lithium battery.
Important Safety Instructions Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Componnets Item WiFi Camera Instruction See the fine dust clearly at the hard-to-detect spots and improve the cleaning efficiency. One articulated joint makes it Multi-angle folding tube adjustable, clean from high to low place with flexibility. Bluetooth Speaker Connected with the phone for listening to music and answering a call while cleaning. USB Cable For battery charge of the camera & speaker.
Using your Camera & Speaker TURN ON/OFF WiFi Camera Bluetooth Speaker 3s “Power on.” 3s “Power off.
Using your Camera & Speaker Pair With Your Device WiFi Camera ① ② ③ Turn on the camera and wait for the blue light ④ blinking. Open Tineco App and tap “Tineco Camera” Connect to the camera hotspot according to guide. Go back to App and enjoy camera after connection is completed. Please be assured that the connection is only between the camera and device, WiFi of App is disabled while using camera.
Using your Camera & Speaker Pair With Your Device Bluetooth Speaker “Connected.” ON Turn on speaker, blue light blinking. Turn on and choose the device of “Tineco Speaker”. Connected with a prompt tone. Solid blue light. If disconnection for 10 mins, the speaker will automatically shut down with a prompt tone. Please restart the speaker to connect again, speaker will automatically connect to the last connected device if available. If not, speaker will enter pairing mode.
Using your Camera & Speaker Install and enjoy WiFi Camera Two ways to install: ① or Place camera on the multi-angle folding tube. Insert multi-angle folding tube to the main body (phone on the holder), with accessories on the other side. Insert multi-angle folding tube to the tube, with accessories on the other side. ② Place camera on the tube and insert tube to the main body (phone on the holder), with accessories on the other side.
Using your Camera & Speaker Install and enjoy Bluetooth Speaker Align the slot of Bluetooth Speaker with the phone holder and insert the speaker on it. Place the phone on the holder, and now feel free to enjoy music or talk on the phone while cleaning. Reminder: 1. To increase service life of the speaker and protect your hearing, please avoid excessive volume levels and prolonged periods of listening. 2.
Using your Camera & Speaker Charging Plug the provided USB cable into the charging port for charging. (available on camera & speaker) During Charging: Red light blinking Fully Charged: Red solid light Beep every 30s, low battery, please charge. During Charging: Red solid light Fully Charged: Light turns off Only use the provided or certified USB cable for charging by 5V rated input. Fully charge the camera takes about 3-4 hours and speaker takes 2 hours. Based on results from Tineco lab tests.
Specification WiFi Camera Bluetooth Speaker Model & WiFi name Tineco Camera Model & Bluetooth name Tineco Speaker Resolution 1280*720P Bluetooth Version Bluetooth V4.2+EDR Effective Pixels 1.3 million Effective Range ≤10M (May vary by environment.) Battery Li-ion battery 3.7V/350mAh Battery Li-ion battery 3.7V/400mAh Charging Input 5V 2A MAX Charging Input DC 5V/0.
Troubleshooting Problem No image Possible cause Not connected to the network Solution Check network status Ambient lighting condition changes Improve the lighting condition WiFi Camera Unusual image No sound Weird noise Bluetooth Speaker Low battery Fully charge the battery before use Affected by external device Change the using condition Speaker not activated Turn on the speaker No battery Fully charge the battery There are obstacles between the connected devices Remove obstacles Speaker n
Warranty The 1-Year Limited Warranty applies to purchases made from authorized retailers of TINECO. Warranty coverage applies to the original owner and to the original battery only and is not transferable. According to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.
Warranty WARRANTY SERVICE Please contact the TINECO customer service Email: support@tineco.com Please inform us your model name/number, serial number, purchase date, order number, product problem and your requirement. Please keep your purchase receipt in a safe place to ensure you have this information. All work will be carried out by TINECO or its authorized agency. Any replaced defective parts will become the property of TINECO. Service under this warranty will not extend the period of this warranty.
Live Easy Enjoy Life tinecoglobal 1-855-292-8864 Mon. - Fri. 9am - 6pm (CST) support@tineco.com www.tineco.com Contact us - We'll get back to you within 1 business day.
