T1003-01_W236_Cover_Analog_1_Cover 3/10/10 10:05 AM Page 1 W236 NA 333-095002
T1003-01_W236_Cover_Analog_1_Cover 3/10/10 10:05 AM Page 3 English page 2 Français page 34 Español página 68
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page ENii TIMEX® WATCHES Congratulations on purchasing your TIMEX® watch. Please read these instructions carefully to understand how to operate your Timex timepiece. Your watch may not have all of the features described in this booklet. For more information, and to register your product please visit: www.timex.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page ENiv ENGLISH TABLE OF CONTENTS 2 How to Start Your Watch 3 Water and Shock Resistance 4 Indiglo® Night-Light 5 Date Models 7 Day/Date/Am/Pm/Sun/Moon Models 9 Perpetual Calendar 11 Chronograph 21 Tachymeter Function 22 How to Adjust Bracelet 24 Bracelet Link Removal 25 Battery 27 Warranty
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 2 ENGLISH ENGLISH HOW TO START YOUR WATCH WATER AND SHOCK RESISTANCE To start your watch remove the plastic guard from under the crown, then press the crown in against the case. The second hand will begin advancing in onesecond intervals. If your watch is water-resistant, meter marking (WR_M) is indicated. Some deep-depth water-resistant watches require the setting crown to be screwed in to secure waterresistance.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 4 ENGLISH ENGLISH 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock-resistance will be indicated on the watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging the crystal. INDIGLO® NIGHT-LIGHT Press button or crown to activate light.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 6 ENGLISH ENGLISH TO SET QUICK DATE® FEATURE: 3-Position Crown: DAY/DATE/AM/PM/ SUN/MOON MODELS 1) Pull crown to “Middle” position and turn CLOCKWISE or COUNTERCLOCKWISE until correct date appears. 2-Position Crown: DATE DAY AB C 1) Pull crown to “OUT” position and turn CLOCKWISE until date changes. Repeat until correct date appears. Adjust date when month has less than 31 days. Push crown in when finished.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 8 ENGLISH ENGLISH PERPETUAL CALENDAR TO SET DATE: 1) PULL out crown to “B” position. 2) TURN crown clockwise to correct date. 3) PUSH in crown to “A” position. TO SET DAY: 1) PULL out crown to “C” position. 2) Advance time 24 hours to change the day. 3) PUSH in crown to “A” position. Your Perpetual Calendar watch accurately keeps track of how many days are in each month. It also adjusts for leap years.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 10 ENGLISH ENGLISH for setting day or date. Push crown in when done. After setting, if date changes at noon, time needs to be adjusted ahead or back 12 hours. If crown is accidentally put in MIDDLE position and turned, date display will change temporarily, but date setting is unaffected. Simply pull crown all the way out and set time. Proper date display will resume.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 12 ENGLISH ENGLISH • Chronograph second hand shows “seconds elapsed” for chronograph. TIME TO SET THE TIME: 1. PULL crown out to “C” position. 2. TURN crown either way to correct time. 3. PUSH crown in to “A” position. TO ADJUST TO A NEW TIME ZONE: 1. PULL crown out to “B” position. 2. TURN crown either way to move the hour hand in hour increments. CALENDAR TO SET THE CALENDAR: 1. PULL crown out to “B” position. 2.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 14 ENGLISH ENGLISH BEFORE USING THE CHRONOGRAPH, adjust all the chronograph hands to the “0” or 12-hour positions. TO ADJUST CHRONOGRAPH HANDS: 1. PULL crown out to “B” position. 2. PRESS pusher “B” until the hand at the 10 o’clock eye resets to the “30” position. 3. PULL crown out to “C” position. 4. PRESS pusher “A” until the chronograph second hand resets to the “0” or “60” or 12-hour position. 5.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 16 ENGLISH ENGLISH NIGHT-MODE® FEATURE TO USE NIGHT-MODE® FEATURE: 1. PUSH and HOLD Crown to “D” position for 4 seconds to activate NIGHT-MODE® feature. PRESSING any pusher will cause the INDIGLO® night-light to stay on for 3 seconds. 2. NIGHT-MODE® feature will last for 8 hours. 3. Or PUSH and HOLD Crown to “D” position for 4 seconds to deactivate Night-Mode® feature.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 18 ENGLISH ENGLISH SETTING THE DATE 1) PULL the crown out to the 1st position “B”. 2) Turn the crown counter-clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3) After the date has been set, push the crown back to the normal position “A”.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 20 ENGLISH *Do not push crown to normal position while the chronograph second hand returns to zero position. It stops on the way when crown is returned to normal position and its position is recognized as zero position. ENGLISH TACHYMETER FUNCTION The tachymeter will only determine speeds greater than 60 units per hour using this method; slower speeds can be measured by decreasing the unit of measurement.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 22 ENGLISH HOW TO ADJUST BRACELET (Variations of the following bracelet sections apply to all watch models). SLIDING CLASP BRACELET 1 Open locking plate. 2. Move clasp to desired bracelet length. 3. Exert pressure while holding locking plate and slide clasp back and forth until it engages in grooves on underside of bracelet. 4. Press locking plate down until it snaps closed. Clasp can be damaged if excessive force is used.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 24 ENGLISH ENGLISH BRACELET LINK REMOVAL BATTERY REMOVING LINKS: FOR PERPETUAL CALENDAR MODELS: 7-YEAR BATTERY LIFE* WITH FREE LIFETIME REPLACEMENT** 1. Place bracelet upright and insert pointed tool in opening of link. 2. Push pin forcefully in direction of arrow until link is detached (pins are designed to be difficult to remove). 3. Repeat until desired number of links are removed. RE-ASSEMBLY: 1. Rejoin bracelet parts. 2.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 26 ENGLISH ENGLISH ** Shipping & handling charges apply. TIMEX INTERNATIONAL WARRANTY NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN YOUR SHIPMENT. Your TIMEX® watch is warranted against manufacturing defects by Timex Group USA, Inc. for a period of ONE YEAR from the original purchase date. Timex and its worldwide affiliates will honor this International Warranty.
T1003-01_W236_EN_analoglayout_4 3/10/10 10:02 AM Page 28 ENGLISH OR CONSEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from country to country and state to state.