Instruction Manual

iQ+move

Your iQ+move timepiece is the best of both worlds. The beauty of a classic analog watch with the

ability to track your daily activity in both steps and distance!

Features

 Classic Analog design

 BLE connection with Smartphone application (iOS and Android formats)

 Automatic sync of time and date every 6 hours

 Daily automatic sync of activity

 Activity tracking displayed on watch dial

 Percent to goal achievement displays on the watch dial

 Smartphone application displays actual count and percent to set goal achieved for

Steps, Distance and Calories

 Smartphone application retains activity data and displays activity by day, week,

month or year.

 Perfect Date

 Alarm and Count-down Timer (operated from phone application)

 INDIGLO® night-light

 Estimated battery life of 1+ years – no charging required!

SMARTPHONE APPLICATION AND MINIMUM REQUIREMENTS: This watch requires the use of the

Smartphone application which is available in both iOS and Android formats. Please download the

application from the itunes or google play stores, prior to starting the watch.

HOW TO START YOUR WATCH: To start your watch remove the plastic guard from under the crown,

set the time, and then press the crown in to the closed position. Open the Timex Connected app on your

Smartphone. When instructed to do so by the app, push and hold the crown for about 5 seconds to

activate the Bluetooth radio. A tone will sound on the watch as the Bluetooth radio is activated. The

hands are initially all located at the 6 position. The Smartphone application will instruct you on the hand

calibration and ask you a series of questions to complete your profile and set up the watch and

application for use. The current date and time from your Smartphone is utilized to set the time and date

on the watch. NOTE: Your watch will be updated 4 times per day with the current time and date from

your Smartphone. This is done automatically, but can also be done on-demand (see MANUAL SYNC

section below).

AUTOMATIC SYNC: The automatic time/date sync occurs every 6 hours, provided your watch and

Smartphone are within the maximum 2 meters range. This synchronization is done automatically without

any action required by the user. NOTE: The watch must be within 2 meters distance of your Smartphone for

optimum communication

PAGE 1
iQ+move Your iQ+move timepiece is the best of both worlds.
PAGE 2
MANUALTIME SETTING: In the event you need to update the time setting on your watch when your Smartphone is out of range of the watch, you may do so manually. NOTE: The watch crown has four positions: one temporary push position used to activate the INDIGO night-light, and three indexing positions: closed, middle and outer.
PAGE 3
reaches zero, the audible tone sounds and the INDIGLO night-light will flash. To silence the tone and the INDIGLO night-light, press the crown. SECOND HAND FUNCTION: The second hand on your watch is able to perform one of three functions. The selection of the second hand function is done in the Smartphone app. Each of the three functions provides unique information and impact the battery life of the watch: Function Battery Life impact Second hand: Indicates the seconds within the minute.
PAGE 4
closed position, calibrate the hands within the Smartphone app and perform a manual sync to push the current settings (time, date, alarm, second hand function, count-down timer) into the watch. WATCH RESET: If you wish to do a factory reset on the watch (all data will be lost), open the Timex Connected app and follow the instructions on the Factory Reset page to perform a factory reset.