PK-232SC Operating Manual Note: This manual covers the features added with the SC version of the PK-232. The main PK-232 manual describes the modes and features found in the original PK-232 and PK-232MBX. They are marked with an “*”. The DSP manual supplement describes the DSP board features.
WARRANTY TIMEWAVE TECHNOLOGY INC. LIMITED ONE YEAR WARRANTY WHO IS COVERED This warranty is extended only to the original purchaser of the A.06118. WHAT WE WILL DO WHAT YOU MUST DO WHAT IS NOT COVERED SERVICE WARRANTY If your A.06118 fails in normal use because of a defect in workmanship or materials within one year of the date of purchase, we will repair or replace (at our option) the equipment at our factory without charge to you.
Table of Contents Overview...................................................................................................................................... 4 PK-232SC Block Diagram ............................................................................................................. 5 Front Panel .................................................................................................................................. 6 Rear Panel...........................................................
Overview The PK-232SC is the latest generation of multimode data controllers built upon the solid foundation of the legendary PK-232. The PK-232SC features an expanded interface to connect and control your radio transceiver, station accessories and computer. The key to the new PK-232SC is a single USB cable from your PK-232SC to your computer. No other connection is necessary. Note the PK-232SC block diagram in Figure 1. The USB cable from the computer connects to a four port USB hub inside the PK-232.
PK-232SC Block Diagram Computer System Block Diagram PK-232SC Multimode Controller USB Radio XCVR Serial data USB USB to UARTx2 Rig Control I/O PK-232 PTT, CW, FSK Output Serial Data PK-232 CPU Rig Control Rig control data Control PTT, CW, FSK Input PK-232 Modem Audio PK-232 Data Audio USB Hub SC / TNC Switch PK-232SC Audio switching matrix Data Audio Data Audio SC / TNC Switch SC Data Audio USB-Audio Sound Card USB USB Aux USB Port USB Aux USB Port Figure 1 5
Front Panel 11 9 10 1 2 4 3 5 6 7 8 1. OVL LED 2. DCD LED* 3. THRESHOLD control* 4. TUNE LED bar* M – Mark S – Space 5. STATUS LEDs* 6. MODE LEDs* 7. RADIO 1 / RADIO 2 switch* 8. ON / OFF Power Switch* 9. SC LED 10. PK-232 LED 11. SC / PK-232 panel switch 1.
2. Amber PK-232 LED on – The PK-232 mode is on if the switch is set to the right. 3. If both blue and amber LEDs are on at the same time, you have selected the SC mode with software control and have set the panel switch to PK-232 mode. The sound card mode (blue LED) is active if it is selected with either the panel switch or the software control. The software control will override the front panel switch PK-232 mode selection.
Rear Panel 24 23 22 21 20 19 18 17 16 1 2 15 3 4 5 6 7 8 9 10 11 12 13 14 1) Reset Resets PK-232 to factory default (baudot mode, erases memory) Press once momentarily with power off. 2) Power Power jack for +13.5 VDC @ 750 Ma. (5.5mm x 2.1mm) 3) RX-IN Audio 1* 3.
6) RX-IN Audio 2* 3.5 mm mono phone jack Tip – receive audio from radio Ring & Sleeve – Ground 7) Scope & FSK* Five pin DIN connector 1 – FSK Normal output 2 – Ground 3 –Mark signal to oscilloscope 4 – FSK reverse output 5 – Space signal to oscilloscope 8) EXT Modem* Five pin IDC flat connector 9) Key Out - * Morse keying output to legacy transmitters with negative voltage on their Morse key inputs.
12) Logic Level Rig Control – See Note 1! 8 pin miniDIN female 1 – RXD - logic level data input from radio 2 – TXD - logic level data output to radio 3 – RTS – logic level data control output to radio 4 – CTS - logic level data control input from radio 5 – DTR – control output to radio from Rig Control COM port – use for PTT or positive CW keying – 30V/20mA MAX! 6 – Ground 7 - Short to pin 8 for older Kenwood logic level radios 8 - Short to pin 7 for older Kenwood logic level radios 13) CAT/CIV Rig Contro
19) Aux Out Level Adjusts only sound card auxiliary output level 20) USBx2 Two USB Type B jacks for USB 2.0 compatible devices. Maximum 100 mA. each unless 5VDC power supply is connected. 21) +5VDC ONLY! Do not connect any other voltage to this jack! Center of jack is positive polarity. 5 Volts DC only @ 2A for powered USB hub operation only Required only for USB devices that draw greater than 100 mA. To use this jack, you must change a jumper inside the PK-232SC.
Operation Note: This manual covers the features added with the SC version of the PK-232. The main PK-232 manual describes the modes and features found in the original PK-232 and PK-232MBX. The DSP manual supplement describes the DSP board features. PC USB Connection Connect the PK-232SC to an USB 2.0 compatible port on a computer with a single USB cable (USB miniB to USB A). No other computer connections are required. The computer USB port must be capable of supplying full USB power (5.0 Volts @ 500mA.
Some programs will automatically identify the correct ports for their functions. Others may have limited ability to aid you in connecting the correct port to your software application. If you wish to identify or edit the various PK-232SC ports, use the Device Manager application found in Windows XP/VISTA/Win7. Go to Control Panel/System or Computer/properties to find Device Manager.
SC Board Jumper Settings The SC board has several jumper options that may be changed by the user. In most instances the jumpers can be left at the factory default settings. The jumpers are located on the SC daughter board at the rear of the PK-SC. Rig Control Not all transceivers have the same polarity settings for their logic level rig control ports. The PK-232SC polarity settings for RX, TX, RTS and CTS can be changed to meet the requirements of any specific transceiver.
Data Sheet PK-232SC Multimode Data Controller Now with USB Audio, Rig Control and Single USB Computer Cable! Features Digital Signal Processor 18 DSP Filters Twin Peak RTTY Filters Adaptive PACTOR filters Works with all sound card modes USB Sound Card Audio RS-232, logic level & USB Rig Control for Icom, Yaesu & Kenwood radios Single USB Computer Connection Galvanic Computer Isolation SC Upgrades for all PK-232 models Timewave’s customers swear by their DSP filters and PK-232 owners
All the Proven Modes + All the Sound Card Modes The PK-232SC supports all the new sound card modes in addition to all of the existing PK-232 modes - Pactor, VHF/HF Packet, AMTOR/SITOR, Baudot, ASCII, Morse, HF Weather FAX, TDM, and NAVTEX. The PK-232SC comes with a complete cable and connector set in addition to Timewave’s on-line and telephone support.
5 4 FB1 3 2A/0.05DCR 2 FB2 JP1 1 2 JUMPER 2_7 2A/0.05DCR JP2 1 2 3 U1 2 + 1 C1 10uF R3 10k 1 +3.3Vu LP38501-ADJ IN OUT EN ADJ U2 MIC2026-1BM 4 +C2 100uF R2 44.
5 4 3 2 1 D D To USB audio codec U6 LP38692MP-3.3 R22 0 +3.3VA R92 4 1 VBUS2-SW C32 1.0uF/10V C GND From VBUS Audio Vin Ven C33 .01uF Vout NC 3 2 C31 1.0uF/10V 5 USB audio circuits + C34 1nF 0 +3.3V C111 100uF C GND-USB To isolated +5Vi digital circuits including 74xx ICs +5Vi D1 S1GB 1 U7 LM7805CT R150 0 2 1 IN OUT C41 0.1uF BEAD FERRITE/SM C36 10uF 3 GND L3 + C42 0.1uF C37 0.1uF + C35 100uF 2 To PK-232sc +13.
5 4 3 2 +5Vi 1 +5Vi DCDB/ DTRB/ C107 0.1uF U19-8 U20-9,10 C103 0.
5 4 3 2 1 D D C119 VCC C125 0.1uF C126 0.1uF 2 C1+ V+ 3 4 C1- V- 7 EN_L 1 C124 0.1uF TX RTS RTS RTS 0.1uF P2 C120 0.
5 4 3 2 1 +3.3VA R77 0 +3.3V R79 20k +3.3V 4 Aux Audio Out R R83 15k 2 3 IN1 1 VO1 100uF Aux Audio Out R 27 26 TEST1 25 5 HID0 TEST0 24 6 HID1 Vccx 23 7 HID2 AGNDX 22 8 SEL0 XTI 21 9 SEL1 XTO 20 + 10 10uF/6.3V C75 11 Vccc 12 VinL C82 .01uF HEADER_4 Vccp2 AGNDP 18 Vccp1 17 13 VinR VoutL 16 14 Vcom VoutR 15 TPA6111A2 PCM2901-CLKIN-12MHz + C73 10uF/6.3V C123 22pF 1-2 L+R combined (default) 2-3 L+R split + C78 10uF/6.3V R99 12.
5 4 3 2 1 D D VBUS_UP VBUS_UP J2 FB1 J1 2A/0.05DCR VBUS_UP_H 1 2 3 4 5 6 7 8 9 HEADER_4 1 2 3 4 USB_DP_H USB_DM_H L1 DLP11SN900SL2 2 1 3 4 USBUP_DP_H USBUP_DM_H FB2 2A/0.05DCR GND_UP BGX50A BR1 1 USB Upstream To SC Conn board C1 2 USB UPSTREAM 1nF C2 4 VCC DD+ ID GND S1 S2 S3 S4 R1 330 mini-USB B 1nF HEADER 1 1 3 J3 PK-232 GND test point GND_UP C3 0.
5 4 3 To JP1 on PK-232 main board D J1 2 Pin IDC 1 2 2 1 D SW1 SW DPDT - Momentary R1 10k Wire to +5BB - D12 or D14 Wire to Ground Assembly for all PK-232 models without SC board C To JP1 on PK-232 main board J6 2 Pin IDC 1 2 C SW1 SW DPDT - Momentary B B Wire to +5BB - D12 or D14 nc J7 2 Pin IDC 1 2 To JP7-1 PK-232SC board Reset Switch Assembly All wires #24 vinyl covered Assembly for PK-232SC board A A To reset PK-232 to factory default, Press switch for 1 sec with power off T
5 4 3 2 1 2 D 2 D Yellow D2 Blue D1 TNC Sound Card 1 C 1 C Header 4x1_2 R1 1k 1 2 3 4 JP1 TNC Sound Card SW1 SW SPDT B B A A Title SC/TNC LED-Switch board Size A Date: 5 4 3 Document Number Assembly AP.40734 Monday, June 06, 2011 2 Rev MPCB.