Enterprise 进取号 Crafted by Tiburn Technology.
Important Safety Information Before using this manual, it is important that you read and understand all of the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this safety information reduces the risk of personal injury or damage to your product. Danger: Be aware of extremely hazardous or lethal situations.
Content Important Safety Information Chapter 1 Using the Computer Hardware -------------------------------4 1.1 Front view -------------------------------------------------------------------5 1.2 Top view ---------------------------------------------------------------------6 1.3 Rear view --------------------------------------------------------------------7 1.4 Installing the disk ----------------------------------------------------------8 1.
Chapter 1 Using the Computer Hardware This chapter contains the following topics: Computer hardware introduction Information on computer connections Note: The descriptions in this chapter might vary from your computer, depending on computer models and configurations.
1.1 Front view 1. System indicator ring 2. Power button 3. USB 3.1 Gen1 connector 4. USB 2.0 connector 5. USB 3.
1.2 Top view 1 Volume up¹ 2 Previous¹ 3 Phone answering key¹ 4 Next¹ 5 Volume down¹ 6 HDMI-in connector 7 Disk power connector 8 Disk lock 9 Projector power button Note: ¹ Functions available only when using the disk Bluetooth speaker.
1.3 Rear view 1 Headphone connector 2 Microphone connector 3 SPDIF connector 4 USB 3.1 Gen1*2 connector 5 USB 2.
1.4 Installing the disk Align the guiding track at the bottom of the disk with the mounting track on the computer, then slowly push the disk into the lock position till you hear a snap sound. Notice: 1. When installing the disk to the computer, make sure you align the guiding track properly aligned with the mounting track on the computer, using two hands to install the disk till the disk is properly mounted to the computer. 2.
1.5 Connecting the computer The computer power connector is located at the rear part of your computer (Fig. 1), press the down the computer to help to connecting.
1.6 Computer stand Use the stand to position the computer to your preference. The maximum adjust angle between the base and the hinge:45° The maximum adjust angle between the hinge and the body: 45° Notice: 1. Adjust the computer to a suitable angle can help avoiding tip-over damage to the computer. 2. The computer may cause harm to children if it is not located in an appropriate place. Place your computer or monitors on a sturdy furniture with a low base or furniture that has been anchored.
1.7 Connecting your computer 1. Connect the keyboard and mouse to your computer 2. Connect the monitor and your computer with a HDMI or DP cable. 3. Connect your monitor and computer to a power source with the power cables. 4. Press the monitor power button to turn on the monitor. 5. Press your computer power button to turn on your computer.
Notice for moving your computer: When moving your computer, it is advised to use one hand hold the base and the other hand to hold the computer hinge.
Chapter 2 Using the disk This chapter contains the following topics: Using the Bluetooth speaker Using the projector Removing the disk Notice: Do not remove the disk when system is powered on.
2.1 Using the Bluetooth speaker The computer disk comes with a built-in Bluetooth speaker, you can connect other smart device with the Bluetooth speaker, follow the below instructions: 1. When the disk in installed to the computer and your computer is turned on: Follow your smart device instruction and find the Bluetooth option, then choose “TIBURN Speaker “from the device list, following the on screen instruction to pair your smart device with the Bluetooth speaker. 2.
2.2 Using the projector (Optional) When using the projector, follow the below instructions: 1. Open the projector cover on top of the disk. 2. Press the projector power button to turn on the projector. 3. Adjust the computer to the desired projecting angle.
2.3 Removing the disk Notice: Do not remove the disk when the system is powered on. Push up the disk lock upward to unlock the disk, then gently detach the disk from the computer.
2.4 Tips for using disk 1. When using the disk separately, make sure the disk is connected to a power source. 2. When using the disk separately, do not place the disk at the edge of the furniture. Push the disk as far from the furniture edge as possible. Tipover may cause danger to children. Make sure the disk placed without the reach of children. 3. Make sure your computer is turned off before remove the disk. Remove the disk when the system is powered on make cause permanent damage to the disk.
Chapter 3 Troubleshooting This chapter contains the following topics: Troubleshooting and Problem Resolution Notice:The illustration and drawings in this chapter may varies from the actual interface, follow actual interface instruction if there is difference.
Solving problems Follow these tips when troubleshooting your computer: If you added or removed a part before the problem started, review the installation procedures to ensure that the part is correctly installed. If a peripheral device does not work, ensure that the device is properly connected. If an error message appears on the screen, write down the exact message. This message may help support personnel diagnose and fix the problem(s).
Problem: You need to change the display property settings. Setting display background and icon properties: 1. Right-click the desktop anywhere except over an icon, then select Personalize from the pop-up menu. 2. From here, select the appropriate options to: Change the desktop background Select a screen saver Select Windows color options for borders and taskbar Select a theme 3.
Adjust the Windows volume control: select the speaker icon from the taskbar. Ensure that the volume is turned up and the sound is not muted. Adjust the volume, bass, or treble controls to eliminate distortion. Reinstall the audio driver. Disconnect any headphones from the headphone connector: sound from the speakers is automatically disabled when headphones are connected to the computer’s side-panel headphone connector. Problem: No sound from headphones.
through other drastic means. This can cause system program problems or even failure during system initialization. During the uninstall process, never directly delete the files or folders. This is harmful to the operating system, and might cause a system-wide malfunction. Use the following procedure to properly uninstall programs: 1. Back up all documents and system settings related to the program before removing it. 2. If the program has its own uninstaller, run it directly to uninstall the program. 3.
capacity is expressed in the binary system as 1024 bytes (For example, the nominal capacity 1G is 1000M, while the actual capacity 1G is 1024M). The capacity of the hard disk shown in Windows can be calculated according to the calculations in the following example: The nominal capacity of the hard disk is 40G, while its actual capacity should be: 40G x 1000 x 1000 x 1000/(1024 x 1024 x 1024) = 37G.
To perform system recovery after a serious error in Windows 10, click or tap the Start button and select Settings → Update & security → Recovery. Then, follow the instructions on the screen for system recovery. Attention: The Windows operating system is provided by Microsoft Corporation. Please use it in accordance with the END USER LICENSE AGREEMENT (EULA) between you and Microsoft. For any question related to the operating system, please contact Microsoft directly.
The following are general methods for cleaning the components: You can use a soft cloth to remove dust on the surface of the computer, the monitor, the printer, the speakers and the mouse. You can use a vacuum cleaner to clean in otherwise inaccessible corners. To clean the keyboard thoroughly, shut down the computer and scrub it gently with a wet cloth. Do not use the keyboard until it is dry. Do not do any of the following: Allow water to enter the computer.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.