User's Manual

CASTER USER MANUAL
STUDIO-GRADE DESIGN
Caster features a broadcast studio-grade all-tube
design with internal springs and hidden cable
management. All friction-hinges are hand-tightening,
no need for any tools, and a full 360-degree rotation
means you are covered for any application. Effortless
and quiet, Caster stays in place after being adjusted
and the robust C-clamp creates a solid connection
with your desktop.
1. Fix the clamp to the desk / table. 2. Insert the stand into the clamp. 3. Install the microphone (and/or shockmount) to the stand through the 5/8”-27 standard threading.
Alternatively, you may use 1/4"-20 Male or 3/8"-16 adapters to fix your microphone.
4. You can adjust the microphone angle by using
the microphone angle adjustment knob.
5. You can adjust the position by using the stand
angle adjustment knob.
6. Do not open the bottom screw, as it may result
in malfunctioning of your boom arm.
TECHNICAL SPECIFICATIONS
Boom Type : Extruded Aluminum
Desktop Mount : C-clamp
Product Weight : 1.4 kg / 3 lbs
Rotation : 360 degrees Max Horizontal
Reach : 32”
Max Weight Hold : 1.2 kg / 2.65 lbs
Cable Management : Hidden cable management
Threading : Standard 5/8” threading
PACKAGE CONTENTS
Caster desktop boom arm (Microphone is not included)
C-clamp for desktop mount
5/8"-27 Female to 1/4"-20 Male adapter
5/8"-27 Female to 3/8"-16 Male adapter
Built-in cable
Type C to Micro USB and Mini Usb adapter
Scan QR Code to follow
Thronmax
on social media
http://www.thronmax.com
• Designed for all Thronmax microphones
• Supports most of the mics in the market
• Advanced internal spring design
• Hidden Cable management
• Hand-tightened friction-hinges for smooth operation
• Compatible with all standard shock mounts
THRONMAX PULSE
THRONMAX MDRILL
ONE / ONE PRO
THRONMAX MDRILL
ZERO / ZERO PLUS
THRONMAX MDRILL
DOME / DOME PLUS
ALL THRONMAX MICROPHONES ARE
COMPATIBLE WITH CASTER BY DEFAULT.
5/8"-27 Female to
1/4"-20 Male adapter
5/8"-27 Female to
3/8"-16 Male adapter
IF YOUR MICROPHONE IS NOT COMPATIBLE
WITH 5/8”-27 MOUNTING SCREW, YOU CAN
USE THE ADAPTERS GIVEN IN THE PACKAGE.
Microphone angle adjustment knob
Stand angle adjustment knob
!!CAUTION!!
DO NOT OPEN
THIS SCREW