Assembly Instructions

ASSEMBLY INSTRUCTIONS

1. CAREFULLY UNPACK AND LAY OUT THE PARTS

AS SHOWN IN ILLUSTRATION.

2. SCREW THE TUBE ( B ),COLUMN ( C ) AND

SOCKET PART ( D ) INTO THE BASE ( A ) IN

TURN.

3. INSERT THE HARP ( F ) INTO THE SADDLE OF

THE SOCKET PART ( D ).

4. PUT THE SHADE ( NOT INCLUDED ) ONTO THE

HARP ( F ) AND SCREW THE FINIAL ( E ) TIGHTLY.

5. INSERT THE POLARIZED PLUG INTO OUTLET,

TURN ON THE SWITCH.

6. USE 3 WAY 150W ( MAXIMUM ) TYPE A BULB

( BULB NOT INCLUDED ). INSTALL BULB INTO

THE SOCKET AND ENJOY YOUR LAMP.

IMPORTANT SAFETY INSTRUCTIONS :

THIS PORTABLE LAMP HAS A POLARIZED PLUG ( ONE BLADE IS WIDEER THAN THE OTHER )

AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A

POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,

REVERSE THE PLUG. IF IT STILL DOES NOT FIT,CONTACT A QUALIFIED ELECTRICIAN.

NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY INSERTED.

DO NOT ALTER THE PLUG.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE