User Manual

ManualsBrandsThrane & Thrane ManualsElectronicsSAILOR 6311 MF/HF 150W DSC CLass A FCC

Table Of Contents

Correction sheet
- SAILOR 6300 MF/HF DSC 150W/250W/500W User manual

Correction sheet

98-133352-A 1/4

1111

Correction sheet

Correction sheet 1

SAILOR 6300 MF/HF DSC 150W/250W/500W

User manual

Please note insufficiencies on the pages 3, 10 and 27 in the SAILOR 6300

MF/HF DSC user manual (98-131070-A). These have been corrected in this

document.

• Corrections on page 3: Controls on the front, bulleted item 9 edited

• Corrections on page 10: Adjusting RF gain, 3rd paragraph edited, 4th

paragraph removed

• Corrections on page 27: Display for a session, a note has been added

Summary of content (4 pages)

PAGE 1
SAILOR 6300 MF/HF DSC 150W/250W/500W User manual Please note insufficiencies on the pages 3, 10 and 27 in the SAILOR 6300 MF/HF DSC user manual (98-131070-A). These have been corrected in this document.
PAGE 2
Correction sheet Page 3 in the SAILOR 6300 MF/HF DSC user manual: Controls on the front 1 7 2 8 3 9 10 4 11 5 12 6 13 1. Loudspeaker. 2. Four soft keys with function title in the display. 3. Large TFT color display. 4. Alphanumerical keys to enter Rx or Tx frequency or text strings. 5. CH button for channel selection. 6. Rx/Tx Key to enter Tx or RX frequency. 7. Connector for handset or handmicrophone. 8. Distress button for sending a Distress alert. 9. RF gain control (IF). 10.
PAGE 3
1111 Correction sheet Correction sheet Page 10 in the SAILOR 6300 MF/HF DSC user manual: Adjusting RF gain Use RF gain to control audibility of the incoming signal. Turn the RF gain control knob fully: • clockwise: maximum RF gain — maximum sensitivity • anti-clockwise: minimum RF gain — minimum sensitivity kHz/ RX kHz/ RX The larger the signal strength bar, the larger the signal must be in order to be audible. After entry of a new receive frequency the RF gain is set to maximum.
PAGE 4
Correction sheet Page 27 in the SAILOR 6300 MF/HF DSC user manual: Display for a session In the lower part of the display the type of session, the current state, MMSI number of the other party and lapsed time since the reception of a call request or an acknowledgment is shown. Session state icons Session line QUIT HOLD 4357.0 4065.