OPERATING INSTRUCTIONS
Contents Thorens Factory Warranty 2 Description 3 Setup 4 Preliminary operations 5 Belt and platter 5 Connection to mains 5 Connection to the amplifier or receiver 5 Speed selection and start 5 Manual start, cue control 5 Stop 5 Stylus DN 251 S 5 Technical data 6
Dear THORENS customer, Thank you very much for your confidence in our product, the record player Thorens mini. With the purchase of this device you have acquired a precision instrument for the purpose of playing back analogue records. This appliance however requires your attention with respect to set-up, placement and handling in order to achieve a flawless operation.
DESCRIPTION 1 2 3 5 6 4 11 7 10 8 9 Dust cover Hinge Cueing lift lever Speed selector and ON-OFF switch Tone arm support with tone arm lock Stylus Audio Cinch plugs l (red= right chanell, white = left chanell)) 8 Earth wire 9 Connection socket for mains set 12 V / DC 10 Platter 11 Axis 1 2 3 4 5 6 7 WARNING! To prevent fire or shock hazard, do not expose this product rain or moisture.
Setup Fig. 1 Fig. 2 Fig.
Preliminary operations Speed selection and start Unpack the unit and all accessories. This record player is started by selecting the speed of either 33 or 45 rpm. Please keep the packaging for future use when transporting the device. - Attach hinges (2) to the designated recesses at dust cover (Fig. 1). - Insert dust cover hinges into the respective sockets. Belt and platter (Fig. 2) The belt comes already looped around the transmission area of the platter (10).
Technical data Measured values = typical values Belt drive electronic-controlled DC motor Mains voltage (Mains set) 230 V / 50 Hz or 115 V / 60 Hz Line frequency 50 / 60 Hz Power requirement 1,5 W Platter speeds 331/3 , 45 rpm Wow and flutter (DIN/WRMS) ± 0,07 % Platter Ø 296 mm Signal-to-noise ratio (DIN 45 500) Rumble unweighted signal-to-noise ratio Rumble weightes signal-to noise ratio 46 dB 68 dB Effective tonearm length 211 mm Offset angle 26° Overhang 19,5 mm Tangential trackin
Thorens Export Company Ltd. Im Hübel 1, CH-4304 Giebenach – Basel / Switzerland Tel. ++41 (0) 61 – 8 13 03 37 Fax Tel. ++41 (0) 61 – 8 13 03 39 Internet: http://www.thorens.ch, Email: info@thorens.