Specific Absorption Rate compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.7cm separation between the device, including its antenna and the user's body. 21008A SHEET SAR Date : 07 Aug 2003 FOC ID: GIH2-1008A Mars tech Report No.
1008 > 2.4 GHz Dual Cordless Handset Call Waiting Caller ID Phone System User's Guide We bring good things to life.
FCC RF Radiation Exposures STATEMENT This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body, This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter” INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed.
Your Caller ID Call Waiting phone allows you to: » View the name and telephone number of a caller (Call Waiting Caller 1D) while you are on the phone. » Identify callers before you answer the phone, » View the time and date of each incoming call, + Record up to 40 Caller ID messages sequentially. + Know who called while you are on the other line or when you were sway.
INSTALLATION INSTALLATION NOTE: Same cordless telephones operate ut frequencies that fay cause interference to nearby TV, microwave ovens, and VCR, To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of 4 TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone Hither away from these appliances. Certain other communications devices nay also use the 2.
SERVICE If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-448-0329. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by AT LINKS USA, Inc.