Data Sheet

DocID: 479829_04.02.2020
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany • www.thomann.de
EN
Amp Stand
Features
 Rock solid, stable, foldable and tiltable amplier stand
 Bracket for guitar amps, bass amps and speakers
 Ideally tiltable back construction for stage, studio,
rehearsal room & tour
 Sturdy steel frame with foam padding and rubber feet
 Can be folded at and compact for easy transport and
storage
 No tools required
 Dimensions
folded (W×H): 35.2×64.5cm
unfolded (W×H×D): 35.2×48.5×50.4cm
 Weight: 1.7kg
 Max. load capacity: 50kg
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC oor and
after some time cause permanent dark stains. In case of doubt, do not put
the rubber feet directly on the oor, but use felt-pad oor protectors or a carpet.
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the notes and markings
on the packaging.
This device is intended to be used as a stand for amplieres and speaker boxes.
Any other use or use under other operating conditions is considered to be
improper and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are properly disposed of and
are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts from the product.
They could swallow the pieces and choke! Never let children use electrical
devices unattended.