SHIFT RED User Manual
For comfortable use of SHIFT RED, check out the tutorial videos on the SHIFT website(www.thisiseng.com/support/videotutorials). this is engineering Inc. ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual Read this User Manual carefully before using the SHIFT drone product. this is engineering Inc. shall not be included in any legal action or held liable for any direct or indirect damage resulting from the use of the product. All information in this User Manual may be updated on the SHIFT website (www.thisiseng.com) without prior notice. ⓒ 2019. this is engineering Inc. All Rights Reserved.
contents 01_PRODUCT OVERVIEW · About SHIFT RED 6 · Product Components 7 · Aircraft Parts and Specifications 8 · Controller Parts and Specifications 10 02_PRECAUTIONS · Precautions 12 - Age Recommendation 12 - Compliance with Relevant Laws 12 - Pre-flight Inspection 13 - Precautions During Flight 14 - Rules on Managing Drone and Controller Batteries 15 - Unauthorized Disassembly Prohibited 17 - Legal Responsibility for Footage 17 03_HANDLING THE AIRCRAFT 4 · Attaching the Propellers 1
SHIFT RED User Manual 04_HANDLING THE CONTROLLER · Powering On / Pairing with the Aircraft 25 · Powering Off 27 · Charging 28 · Firmware Updates 29 · Preference Settings 30 · Controller Status Indication 33 05_CONTROLLING THE DRONE · Taking Off 37 · Landing 40 · Flight Control 41 · Emergency Measures 47 06_USING THE MOBILE APPLICATION · Installation and Execution 49 · Using Free Flight Modes 52 · Recording Preference Settings 55 · Sensor Calibration 56 07_DECLARATIONS OF CONFORMIT
01 PRODUCT OVERVIEW About SHIFT RED SHIFT RED is a package consisting of the SHIFT drone and its controller. This drone product is a portable and compact quadcopter equipped with software gimbal, vision recognition, and hyper-sensor fusion technology. Shake-free FHD video shooting and real-time video transmission functionality offer you a stable but dynamic drone fligh One of the most important features of SHIFT RED is its controlling method.
SHIFT RED User Manual Product Components * The pictograms in this User Manual are for reference only, and may not be an accurate representation of the actual product.
Aircraft Parts 1 2 3 7 8 4 5 9 6 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 8 Protectors Propellers (CCW) Propellers (CW) Motors Motor housings Arms Vision camera Front LED Integrated 3D sensing system Micro SD slot (inside) Battery USB port (Type-C) Power button (LED) Landing gears ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual Specifications Weight with Battery 93 g Dimension (WxDxH) without Propellers 115 X 115 X 59 mm Dimension (WxDxH) with Propellers & Protectors 194 X 188 X 59 mm Radio Frequency 2.4 GHz, 5 GHz Dual Band (for video streaming) Max Distance 300 m Max Altitude 25 m Flight Time 10 min (Max) Operating Temp.
Controller Parts < Back > 6 1 5 2 3 < Bottom > 4 7 8 1 2 3 4 10 Control ring Control pad Power/setting Control stick 5 6 7 8 LED indicators Jog button USB port (Type-C) Reset ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual Specifications Weight 67 g Dimension (WxDxH) 37 X 39 X 96 mm Radio Frequency 2.4 GHz Control Range 300 m (Max) Operation Time 60 min (Max) Operating Temp. 0~40℃ Battery Li-Po, 3.7 V, 300 mAh DC Input 5 V, 400 mA Charging Type USB Type-C Charging Time 60 min The maximum control range (maximum flight distance) can vary with surrounding signals. Exercise caution not to let the drone out of your sight; an uncontrolled drone may disappear or cause accidents. ⓒ 2019.
02 PRECAUTIONS Precautions Please observe the following when using the SHIFT drone product to prevent accidents and situations of potential legal liability. Age Recommendation · The SHIFT drone is not recommended for children below 14 years of age.
SHIFT RED User Manual Pre-flight Inspectio · Make sure that the drone and controller batteries are fully charged. The charging status of the drone and controller can be checked using the SHIFT Drone application. · Inspect the propellers. All propellers should be firmly fixed. Worn, cracked, bent or damaged propellers must be replaced. · Make sure that the intelligent vision (camera) on the front side of the drone, and the lenses and sensors of the bottom sensor system are clean and free of stains.
· Do not fly the drone in areas under the influence of strong magnetic fields or magnets. · The recommended flight conditions are mild weather conditions with a temperature between 0°C–40°C (32°F–104°F). Be wary of sudden changes in wind direction or weather. Do not use the aircraft in adverse weather conditions such as rain, snow, fog, and wind. Precautions During Flight · Only use the genuine SHIFT RED propellers. Do not use together with propellers of other brands.
SHIFT RED User Manual · The drone may not work properly when flying over highly reflective surfaces such as water- or snow-covered areas, or when flying in dark. · Exercise caution right after flight as the motor and aircraft are heated up from operation. · Using the controller in the proximity (within 30 cm [1.
· Do not modify or disassemble the battery wiring. · Do not touch battery terminals with a pointed tool such as tweezers or a needle. This may damage the battery and potentially cause a fire. · The ideal temperature range for battery charging is 5°C–45 °C (41°F–113°F). Make sure that the battery temperature does not exceed 60°C (140°F). An overheated battery may cause serious damage or catch fire.
SHIFT RED User Manual Unauthorized Disassembly Prohibited · Unauthorized disassembly, replacement of parts, and reassembly of the SHIFT drone and controller are strictly prohibited, except for the removal, installation, or replacement of propellers, protectors, or batteries. this is engineering Inc. shall not be included in any legal action or held liable for direct or indirect damage resulting from the aforementioned unauthorized changes to the drone or controller by the user.
03 HANDLING THE AIRCRAFT Attaching the Propellers Before your flight, firmly mount all propellers in the correct positions. Note the rotational direction of each propeller. 1 2 3 4 Front 1 , 4 : Position of CW propeller (use propellers marked with the SHIFT emblem) 2 , 3 : Position of CCW propeller CW propeller CCW propeller If the propellers are not positioned correctly, the aircraft will be incapable of normal flight. Ensure that the propellers are mounted in the correct positions.
SHIFT RED User Manual Attaching the Protectors The SHIFT drone comes with two protectors, to be attached on each side during flight. Attaching the drone with the protectors is recommended to protect the aircraft and propellers. Read the instructions on attaching/removing protectors before flight. Attaching the protectors The inner side of the protector has a groove that fits the shape of the motor housing. The mounting part is designed to be placed upon the arm of the aircraft.
Powering On / Pairing with the Controller 1. Press and hold the power button for two seconds after inserting the battery into the aircraft, and the aircraft will power on with the power LED turning solid orange. If the aircraft has successfully started up (taking approximately 9 to 10 seconds), the front LED turns solid blue, indicating that it is ready for flight.
SHIFT RED User Manual Powering Off 1. Press and hold the power button on the aircraft for two seconds, and the aircraft will power off with the front LED and power LED on the bottom going off. Light Off Long-press the power button Powers off Turn off the aircraft only when it has safely landed. Using the power button while the aircraft is still in flight may result in accidents. Data loss may occur if the battery is removed without turning off the aircraft.
Charging 1. Insert the battery into the battery slot. 2. Connect the aircraft to a USB port using the provided USB cable to begin charging. A certified USB adapter rated at 5 V and 1.5 A is recommended for charging. Connecting to a PC may cause delayed or unsuccessful charging. 3. During charging, the front LED of the aircraft displays the charging status.
SHIFT RED User Manual Firmware Updates Firmware updates are provided to optimize the performance of SHIFT RED. Update the aircraft to the latest firmware by following the procedure below: 1. From the download page (www.thisiseng.com/support/download/) of the SHIFT website, download the firmware to a micro SD card. 2. With the aircraft powered off, remove the battery and insert the micro SD card into the micro SD slot. 3.
Aircraft Status Indication Aircraft Status Pattern Charging in progress Front LED blinks Charging complete Front LED stays solid Firmware update in progress Front LED blinks Firmware update complete Front LED turns off (powered off) Powered on Power button LED and front LED stay solid Powered off Power button LED and front LED turn off Controller pairing complete Power button LED and front LED blink three times, then turn solid Takeoff complete (hovering Power button LED and front LED blink
SHIFT RED User Manual 04 HANDLING THE CONTROLLER Powering On / Pairing with the Aircraft The controller calibrates automatically whenever it is powered on. The automatic calibration process optimizes controller performance by assessing the surroundings in order to detect fine movement of the control ring. With every change in the place of flight, users are recommended to turn the controller off and on again, thereby recalibrating to optimize control sensitivity. 1.
2. Press and hold the power button for at least two seconds to turn on the controller. After the automatic calibration and welcome ceremony, the stick displays the battery level for about two seconds. Welcome ceremony (melody) If automatic calibration is unsuccessful due to environmental factors, the controller gives a warning beep and powers off automatically.
SHIFT RED User Manual Powering Off 1. Press and hold the power button for at least two seconds to turn off the controller. If the controller does not turn off properly, use the reset button on the bottom. Force the controller to shut down by pressing the reset hole with a pin of appropriate thickness. Hold the pin vertically when pressing the reset hole to prevent damage to the controller. ⓒ 2019. this is engineering Inc. All Rights Reserved.
Charging 1. Connect the USB port of the controller to a USB charger using the provided USB cable to begin charging. A certified USB adapter rated at 5 V and 1.5 A is recommended for charging. Connecting to a PC may cause delayed or unsuccessful charging. 2. While the controller is being charged when powered off, the LED indicator on the controller pad displays the charging status. · Charging in progress: The number of bars blinking on the LED indicator shows the battery level.
SHIFT RED User Manual Firmware Updates Firmware updates are provided to optimize the performance of SHIFT RED. Update the controller to the latest firmware by following the procedure below: 1. From the download page (www.thisiseng.com/support/download/) of the SHIFT website, download the controller firmware and update software. 2. Turn off the controller, and connect to a PC using the USB cable while holding the jog button pressed. 3.
Preference Settings Before takeoff, you can press the power button once to enter Preferences mode, and adjust settings such as control sensitivity, vibration intensity, and volume. Move the jog button left or right to switch between options: control sensitivity ↔ vibration intensity ↔ volume. 1. Briefly press the power button of the controller before flight to enter preference settings mode. 2. The first menu selected upon entering preference settings is “control sensitivity setting.
SHIFT RED User Manual 3. Check the current settings from the lit LEDs on the upper pad of the controller. Control sensitivity Vibration intensity Level 1 (default) No vibration Sound off Level 2 Weaker vibration Decrease volume Level 3 Normal vibration (default) Normal volume (default) Level 4 Stronger vibration Increase volume Volume In control sensitivity setting mode, you can set the acceleration or deceleration of the aircraft according to the distance moved by the ring. 4.
5. Lightly make contact with the center of the control pad to save your setting. 6. Press the power button on the controller to end the preference setting. Your setting is stored even after the controller and drone are powered off. When vibration and volume are turned off under preferences, be extra cautious during take-off and landing (Note that LEDs indicating power on/off, warnings and emergency alarms remain active regardless of vibration and volume settings). 32 ⓒ 2019. this is engineering Inc.
SHIFT RED User Manual Controller Status Indication Controller Status Pattern Charging in progress Corresponding LED indicators begin blinking from top in clockwise direction according to the charging level Charging complete All LED indicators stay solid Powered on Welcome ceremony, then current charging status displayed Powered off Farewell ceremony ⓒ 2019. this is engineering Inc. All Rights Reserved.
Controller Status Pattern Controller pairing in progress All LED indicators blink in clockwise direction Controller pairing complete All LED indicators stay solid Takeoff begin LED indicators turn solid sequentially in upward direction 34 ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual Controller Status Pattern Control mode switching (fligh ↔ hovering) Vibrates and beeps once Control range feedback Vibrates at different levels as ring approache maximum control range (active only in free flight mode Flight mode switching (assist mode ↔ free flight mode Vibrates and beeps once ⓒ 2019. this is engineering Inc. All Rights Reserved.
Controller Status Pattern Landing begins LED indicators turn solid sequentially in downward direction Preference settings and mode alert Level 1 · Control sensitivity 1 · Vibration off · Volume off Level 2 · Control sensitivity 2 · Weak vibration · Low volume Level 3 · Control sensitivity 3 · Medium vibration · Medium volume Level 4 · Control sensitivity 4 · Strong vibration · High volume Different patterns indicate current setting Warning (low battery voltage, weak signal) Drone battery voltage
SHIFT RED User Manual 05 CONTROLLING THE DRONE This section describes how to control the drone for takeoff, landing, and flight, and take actions for an emergency stop. Before proceeding with each maneuver, read the “Pre-flight inspection” and “Precautions during flight” subsections under Section 02 Precautions. The drone has a flight altitude limit of 25 m (82 ft), and the maximum flight distance (maximum control range) may vary with surrounding signals.
2~3m 2~3m 2. Wear the control ring on your thumb, and wrap your hand gently around the control stick. For details on wearing the control ring and using the control stick, read the “Flight control” subsection. 3. Touch the center of the control pad with the ring. 38 ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual 4. Maintain the contact with the pad for over one second, and the drone will take off while playing a takeoff melody. After takeoff, lift the ring off the pad. 5. When the drone succeeds in automatic takeoff, the front LED and power button LED on the drone blink once, and the drone stands by while hovering at a height of 1 m (3.3 ft). For details on controlling after takeoff, read the “Flight Control” subsection.
Landing 1. While the drone is hovering, touch the center of the pad with the ring for over one second to initiate automatic landing. During automatic landing, you cannot control the drone by moving the ring. 2. Once the drone comes to a complete stop, the controller vibrates and the motors stop automatically. Make sure the drone is within 10 m (33 ft) around you during takeoff or landing. 40 ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual Flight Control 1. As shown in the figure, wear the ring on your left or right thumb with the thicker part facing downward. Wrap your other fingers around the control stick, and place your index finger on the jog button. The control ring is ergonomically designed with different shapes at the top and bottom; insert your thumb through the wider opening so that the narrower opening is nearer to your fingertip.
2. While the drone is hovering, press and hold the jog button as shown in the figure to switch to flight mode. Ring control is enabled after the controller vibrates once. 1cm When switching to flight mode using the jog button, the center of the ring on your thumb should be within 1 cm (0.4 in) around and above the center of the controller pad. If the ring is out of the range, the controller gives off a warning and fails in switching to flight mode.
SHIFT RED User Manual 3. The drone flies proportionately to the height and direction of the ring. Move your ring-wearing thumb in the desired direction of flight, and the drone will fly in the same direction. ⓒ 2019. this is engineering Inc. All Rights Reserved.
Your thumb with the ring should be at an adequate height above the controller pad to allow better control over the flight altitude. The degree of acceleration or deceleration can be set proportionately to the distance moved by the ring. Read the “Preference Settings” subsection under the “Handling the Controller” section. 44 ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual 4. When turning the head of the aircraft to the desired direction, turn the jog button accordingly. 5. If you press the jog button during flight, the controller vibrates once and the drone switches to hovering. ⓒ 2019. this is engineering Inc. All Rights Reserved.
6. If the ring is out of the sensing range of the controller, the controller vibrates once and the drone automatically switches to hovering. To prevent unintended loss of control over the aircraft during flight, the controller warns the user by vibrating at different levels as the ring approaches the detection limit. The controller’s range of ring detection may change unpredictably depending on surrounding sources of electromagnetic interference, and this may hinder flight control. 7.
SHIFT RED User Manual Emergency Measures Manual emergency stop · The drone motors stop immediately when you press the jog button and power button on the controller at the same time. Exercise caution as a manual stop in midflight may cause damage to the aircraft or personal injuries. Self-stopping of the drone · In case of a sudden change in surroundings such as a temperature drop or battery shortage, the drone switches to self-stopping to protect itself and maintain the battery performance.
Self-stopping of the controller · In case of a sudden change in surroundings such as a temperature drop or battery shortage, the controller switches to self-stopping to protect itself and maintain the battery performance. · Once the controller switches to this mode, it vibrates and sounds for 30 seconds to notify the user of an emergency. After the 30 seconds of warning, the controller is automatically powered off.
SHIFT RED User Manual 06 USING THE MOBILE APPLICATION Installation and Execution The SHIFT drone comes with a mobile application, “SHIFT Drone.” You can use the application to preview a drone video in real time, and try various flight modes for the drone to shoot from different perspectives. 1. Check the model and mobile OS version of the smartphone on which the application is intended to run.
4. See below for details on the interface of the application.
SHIFT RED User Manual 5. To take photos and videos using the SHIFT Drone application, a micro SD card must be inserted in the aircraft. The micro SD card slot can be seen when the battery is removed. The micro SD card can only be inserted in the designated direction. Use the provided micro SD card, or a micro SD card of video speed class 10 or UHS class 1 or higher with a capacity of no more than 32 GB. Before removing the micro SD card, always check that the drone is powered off.
Using Lezero Pilot Modes Application “SHIFT Drone” offers various flight modes (Lezero Pilot modes) for users to take semi-professional videos and photos. Exercise caution against collisions when in a flight mode. Maintain a distance of at least 2 m (6.6 ft) away from the drone during operations. Visit the website (www.thisiseng.com) for detailed instructions on using the SHIFT Drone application. 1. To start a Lezero Pilot mode, tap on the button indicated below.
SHIFT RED User Manual 5 1 2 3 4 5 6 7 8 6 3 4 7 8 Orbit: The drone flies in orbit. Dolly: The drone flies steadily from right to left. Dolly In: The drone starts far and moves near. Dolly Out: The drone starts near and moves far. Following: The drone flies while following the target. Horizontal Tracking: The drone tracks the target while in horizontal flight. Yaw Tracking: The drone performs a yaw rotation toward the target while flying in position.
4. A target must be designated in the Following, Horizontal Tracking, Yaw Tracking or Hero mode. Place the target in the center of the target box, and drag across the screen to designate the target. When the target is successfully designated, the border of the drag box changes from red to green and flight begins in the selected mode. The altitude must be at least 2 m (6.6 ft) in Following mode and Hero mode. In these modes, check the altitude of the drone before designating a target.
SHIFT RED User Manual Recording Preference Settings 1. To change the photo/video quality settings, tap on the button indicated below. 2. Set the desired photo/video quality while referring to the following description. 1 3 4 2 5 1 2 Setting menu Select photo/video mode 3 4 5 Select quality (low/mid/high) Select frame rate (15 fps / 30 fps) Select anti-flicker (50 Hz / 60 Hz / Auto) ⓒ 2019. this is engineering Inc. All Rights Reserved.
Sensor Calibration The SHIFT drone achieves greater flight accuracy through sensor calibration. 1. Before using the SHIFT Drone application, place the drone on a flat surface with the protectors removed. 2. Turn on the drone, but do not run the motors. 3. To perform calibration, position the drone as illustrated in the SHIFT Drone application. The application and drone must be connected with Wi-Fi during sensor calibration. Each step of calibration may take some seconds (Max. time of 6 minutes with max.
FCC Information Product Model name : SHIFT Drone1 Description : Shift RED Drone FCC ID : 2AR74-SFD1D Product Model name : SHIFT Controller1 Description : Shift RED Controller FCC ID : 2AR74-SFD1C FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
SHIFT RED User Manual If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
The following harmonized European standards and technical specifications have been applied: IEC 62321 series Manufacturer Name : this is engineering Inc. Address : 352, Daewangpanggyo-ro 815, Sujeong-gu, Seongnam-si, Gyeonggi, Korea Telephone number : +82-31-5182-9056 Fax number : +82-31-5182-9057 e-mail : surport@thisiseng.com web : www.thisiseng.com Laser Safety Consideration The SHIFT RED contains a laser emitter and corresponding drive circuitry.
SHIFT RED User Manual KC Information Product Model name : SFD1D Description : Shift RED Drone KCC certification number : R-C-tie-SFD1D Product Model name : SFD1C Description : Shift RED Controller KCC certification number : R-C-tie-SFD1C ENVIRONNEMENTAL PROTECTION NOTES This product must not be disposed of with other waste.
08 WARRANTY AND SERVICE INFORMATION Warranty this is engineering Inc. guarantees that the SHIFT product shall be free from defects in materials or manufacturing for the periods specified below. If the SHIFT product malfunctions under normal use during the warranty period, please visit the nearest service center or the SHIFT website (www.thisiseng.com) to file a warranty claim.
SHIFT RED User Manual Multilingual Manual The SHIFT RED User Manual is available in various languages to help global users learn how to use the product. Download the User Manual in your language from the SHIFT website, and read the instructions before use. www.thisiseng.com/support/download/ 한국어 Español Latino Deutsch Français 日本語 ⓒ 2019. this is engineering Inc. All Rights Reserved.
SHIFT RED User Manual www.thisiseng.com this is engineering Inc.