Smart Switch Gen3
Accessories Screw*2 Fixator*2 Thin rubber ring*2 Thick rubber ring*2 Battery*2 Setting up your Smart Switch Third Reality Smart Switch Gen3 can work with both toggle and rocker style switches. Step 1: Remove screws from faceplate. Step2: Insert with new screws and attachment assembly as follows. In most case, you need to combine fixator with thin rubber ring. However, you can also use fixator only or combine fixator with thick rubber ring to adjust the thickness of attachment assembly.
When switch lever or switch board is up, make sure the Smart Switch clip position is up, you can manually quick press the switch button to adjust the clip position if necessary. Step 4: Place the Smart Switch on the top of your existing switch, follow by the “Up” direction marked on the back of the Smart Switch. Using your Smart Switch 1. Follow instructions in the Amazon Alexa App to set up your Amazon smart speaker 2.
2. Factory reset If you need to factory reset the Smart Switch, long press the button more than 30 seconds until the blue LED blinks rapidly. Limited Warranty For limited warranty, please visit https://www.3reality.com/devicesupport For customer support, please contact us at info@3reality or visit www.3reality.com For help and troubleshooting related to Amazon Alexa, visit the Alexa app.