User's Manual

ManualsBrandsThird Reality ManualsElectronicsSmart Button

Table Of Contents

Smart Button

Main (With function keys and indicator lights)

Product Introduction

Third Reality Smart Button is a ZigBee remote control button with a compact design and comes

with 2 AAA batteries. You can install it by magnetic sheet or double-sided tape. Single, double or

long press to control other smart devices and suit for various scenes.

ZigBee hub is required: (choose a support)

1. Third Reality Hub V1 and V2

2. SmartThings Hub or Aeotec

3. Home Assistant

4. Hubitat

Mounting Kit

Sticker

Magnetic sheet

User manual

AAA Battery (built-in)

Quick Setup

1. Choose the gateway which is compatible and configurate it accordingly.

2. Pull out the insulation sheet and then the blue led light will blinks indicating that the button is

in pairing mode now.

3. Follow the prompts in the App of the corresponding HUB to complete the setup.

Installation

Effective distance confirmation: In the pre-selected installation location, it is clear that the

device and the gateway can communicate effectively.

1. No need to paste, directly place detailed map where you would want (Detailed picture.)

2. Using the included double-sided sticker, stick it on the back and secure it in a safe place.

(Detailed picture.)

3. Using the included magnetic piece, glue it into the groove on the back and hold the other piece

in a pre-selected mounting position, which can be placed and removed freely. (It can also be

directly adsorbed on furniture on metal materials). (Detailed picture.)

Summary of content (4 pages)

PAGE 1
Smart Button Main (With function keys and indicator lights) Product Introduction Third Reality Smart Button is a ZigBee remote control button with a compact design and comes with 2 AAA batteries. You can install it by magnetic sheet or double-sided tape. Single, double or long press to control other smart devices and suit for various scenes. ZigBee hub is required: (choose a support) 1. Third Reality Hub V1 and V2 2. SmartThings Hub or Aeotec 3. Home Assistant 4.
PAGE 2
Using your Smart Button Pair With SmartThings: 1. Add Device, the app show “Third Reality Smart Button” （Add the app device, it shows “Third Reality Smart Button”） 2. On the details page, associate the device or group to be controlled by setting the three operation behavior settings of pressing, double-clicking, and pressing.) 3. Set up and start using Pair with Third Reality Hub：On the ThirdReality App 1. Add the device , it shows “Third Reality Smart Button” 2.
PAGE 3
INDUSTEY CANADA STATEMENT: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. In additional, this device complies with ICES-003 of the Industry Canada (IC) Rules.
PAGE 4
qui peut être déterminé en éteignant et en rallumant l'équipement, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes : -Réorientez ou déplacez l'antenne de réception. -Augmenter la distance entre l'équipement et le récepteur. -Connectez l'équipement à une prise sur un circuit différent de celui auquel le récepteur est connecté. -Consultez le revendeur ou un technicien radio/TV expérimenté pour obtenir de l'aide.