Smart Blind What's in the box? Smart Blind User Guide Smart Blind AA Battery x6 Blind Remote Screw x2 Plastic Expansion Bolt x2 Extension Bracket x2 1
Features 2 1) Direct work with Compatible Echo Devices Smart Blind is a standard Zigbee device. It can direct work with compatible Echo devices with ZigBee hub built-in (including Echo (4th Gen), Echo Plus (1st Gen and 2nd Gen), Echo Show 10 (2nd Gen and 3rd Gen) and Echo Studio). 2) Unique and novel design Smart blinds use bottom drive design, which makes daily operation more convenient and easier to replace the battery.
Factory Reset According to the diagram, measure and mark the corresponding position. Then drill the holes. 10 11 12 13 14 Installation (Inside Mounting/Surface Mounting). Note: If the width of window sill is less than 1.2 inches, please use surface mounting. a. Inside Mounti 9 1. 8 Setting Smart Blind 1 2 3 7 Press and hold the Set "□" button on the Smart Blind body for more than 5 seconds until the status of the LED doesn't change.
b. Surface Mounting According to the diagram, measure and mark the corresponding position. Then drill the holes. 6" Note: If you want to expose the whole window, please ensure the distance from the holes to the window is greater than 4.3". Min. ≥ 4.3" 6" Length of the blind Insert the plastic expansions bolt into the holes and then fasten the extension brackets with the screws. 1 7 6 8 9 10 11 12 13 2 3 2.
3. Pairing Instructions Please ensure your compatible Echo devices have been setup and update to the latest version before pairing with Smart Blind. You can say "Alexa, check for software updates" to check. a. Press and hold the Set“□”button on the Smart Blind body for more than 5 seconds until the status of the LED doesn’t change. Then release the Set button, the LED will flash rapidly after 10 seconds indicating that it is in pairing mode now. Wall 1 2 Wall 3 Wall 4. 8 b.
Using Smart Blind Bottom Sensor 6. Now you can voice control your Smart Blinds now. Optional: We also provide a blind remote and two AA batteries. You also can use this remote to control it. Voice Control "Alexa, turn on my first blind." "Alexa, turn off my first blind." "Alexa, set my first blind to 50 percent." App Control Simply control the blind on/off or just set the percent according to your requirement. Set timers/schedules/routines to let it on/off automatically. Group control is also available.
2. 3. 12 Fail to pair with Echo Make sure your Echo Speaker is compatible with Smart Blind (including Echo (4th Gen), Echo Plus (1st Gen and 2nd Gen), Echo Show 10 (2nd Gen and 3rd Gen) and Echo Studio) and updated to the latest version. Please ensure your Echo Devices are setup before adding the Smart Blind. Reboot the Echo speaker by unplugging the power and plugging it back in, then try to pair the Smart Blind with it again.