User's Guide

NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connect-
ed.
-Consult the dealer or an experienced radio/TV
technician for help.
NOTE: The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-locat-
ed or operating in conjunction with any other
antenna or transmitter.
Troubleshooting
RF Exposure
For limited warranty, please visit www.3reali-
ty.com/devicesupport
For customer support, please contact us at info@3-
reality or visit www.3reality.com
For help and troubleshooting related to Amazon
Alexa, visit the Alexa app.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received,
including interference that may cause undesired
operation.
Limited Warranty
FCC regulatory conformance
Reboot Remote Plus V2
Simply plug the original charger cable in and
then out.
Update the software of the Remote Plus V2
Open Third Reality App > enter in the details page
of the Remote Plus V2 > click “Check Updates”
and then follow the instructions to update the
software over the air.
TV is playing but there is no sound from the
earphones
Please restore the connection with the TV by
unplugging and plugging the earphones.
FindMy function doesn’t work
1.
2.
3.
4.
Battery
Remote Plus V2 uses a rechargeable Lithium-Ion
Battery to power Private Listening, Remote Finder
and the LED. This is independent of the 2 AAA
batteries that Fire TV Alexa Voice Remote uses.
Expected life of a single charge for Remote Plus V2 is
about 30 hours of Private Listening or 6 months of
standby mode for Remote Finder.
LED will flash when the battery level is low. Charge
Remote Plus V2 by connecting the included USB
cable to the micro-USB port on the bottom of
Remote Plus V2 (Power Adapter is not included). The
LED light will glow dimly when charging and then
turn off when charging is completed.
Remote Plus V2
What’s in the Box
LED and Button Mapping
Long press and hold the corresponding buttons until
LED flashes twice and beeper beeps once indicating
that it is in pairing mode.
Note: The pairing mode of the Remote Plus V2 will
run for 3 min after enabled, then the pairing
mode will go off.
Note: Charging this device before using it.
Headphone volume up
Headphone volume down
Pair with App as FindMy device
Pair with TV
“ V +“
“ V -“
& “V-“
& ”V+”
Private Listening
Listen to Fire TV audio through wired earphone/-
headphones.
1.
2.
3.
4.
5.
Remove the back cover of Fire TV Alexa Voice
Remote (3rd Gen) and replace with the Remote
Plus V2.
Go to Fire TV Settings > Controllers > Other
Bluetooth Devices > Add Bluetooth Devices.
Press and hold the “V+” and “ ” button on the
Remote Plus V2 at the same time until the LED
light blinks indicating that it is in pairing mode.
The Fire TV will automatically discover the
Bluetooth Devices, then select the Remote Plus 2
from the list to pair with your TV. When pairing
completed, a notification will come out on the TV
to tell you that your Remote Plus V2 is connected
then disconnect.
Plug your earphones/headphones into the
Remote Plus V2 audio, this will re-direct sound
from TV speakers (or Soundbar) to earphones/-
headphones. Unplugging earphones/head-
phones will re-direct audio back to TV speakers.
Remote Finder by APP
Using the mobile app as a bridge to initiate the beep
to help you find the misplaced remote.
1.
2.
3.
4.
Download the “Third Reality” App from IOS /
Android app store.
Note: If you already have Third Reality App,
please ensure it has been updated to the latest
version.
Press and hold the “V-” and “ ” button on the
Remote Plus V2 at the same time until the LED
light blinks indicating that it is in pairing mode.
Launch the app and then click "+" on the top
right to enter in "Device to add" page > choose
"Remote Plus" > Tap “ ” icon to add a new
Remote Plus V2.
Third Reality App will automatically discover the
Remote Plus V2. After Remote Plus V2 is connect-
ed to the APP, please long press “Remote” icon in
Device page to enter in the details page and then
tap the “Remote” icon on details page to start
beeping, let you find your Remote.
Alexa FindMy Integration
1.
2.
3.
Open the “Amazon Alexa” app and then switch to
the “More” Page > Find “Skills&Games” then
enter in > Search for “Third Reality Skill” and
then follow the instructions to enable the skill.
After the skill is enabled, click the “DISCOVER
DEVICES” button to discover the remotes that
you have connected with the Third Reality App.
Then you can say “Alexa, find my remote” or
“Alexa, ring my remote” to help you find your
Remote.
Note: Press any key on the Remote Plus V2 to stop
beeping when you find it.
Note: Please ensure your Echo Devices are setup
before adding trackers. They need to have the latest
software upgrade. You can try “Alexa, is my software
up to date?” to trigger software update.
Note: Please ensure the Alexa App has been updated
to the latest version.
LED
Use the built in LED to help you see Remote buttons
in the dark.
Turn on/off by pressing “ ” button.
Include two cover case red and blue
Alexa Voice Remote (3rd Gen)
Remote Plus V2
Include two cover case red and blue
Alexa Voice Remote (3rd Gen)
Remote Plus V2 x1 Cover Case x2 User Guide x1
+
Make sure the software of Echo devices, Alexa
App and Third Reality App are up to date.
Please go to the Devices Page of Alexa App >
Click “Trackers” > Tap the “ ” icon on the top
right > Ensure the status of the devices and
general settings are all on.
Make sure you are logged into the relevant
Alexa Account.
firetv
firetv