User's Manual

100-02319-RX480PLUS(A)
© Third Millennium Systems Ltd
registered in England & Wales No. 3199053
Third Millennium Systems Ltd
18 / 19 Torfaen Business Centre
Panteg Way, New Inn
PONTYPOOL NP4 0LS
United Kingdom
Prox Compatible
third millennium
RX4
Product Features
The RX480PLUS advanced access control reader features a sleek
mullion style design and is ideal for surface mounting directly to most
plain wall finishes.
This powerfully secure and innovative reader has a beautifully clean
aesthetic and features an RGB LED that can be applied to many
applications, e.g. colour coded access levels, migration status or mood
lighting.
The unit is moulded using tough polycarbonate/ABS plastic and
includes a shadow line backplate, a subtle design feature that makes
the reader appear to float on the wall.
reader technology
MIFARE® Classic +
• UK design and manufacture
• High gloss finish in BLACK or WHITE
• Slim profile
• RGB LED
• Fully encapsulated electronics
• Wide range of output formats available
• 5 year limited warranty
• Read range up to 10cm (4 inches)
Interfacing
The reader supports a wide variety of output formats allowing
it to be used in most access control and related applications,
e.g. time and attendance, cashless vending etc.
The combination of an integral speaker, an RGB LED, three
control inputs and a variety of LED/buzzer/external control
options provide a flexible platform to give the right user
interface configuration for your project.
Quality Design
Third Millennium has nearly 20 years of award-winning
experience in the design and manufacture of RFID technology
and the delivery of world class, state-of-the-art access control
projects with our many global partners.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjuction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
UTJ-RX80PLUS
Specification
www.tm-readers.com
[phone]
[e-mail]
Connection (screw terminal)
1 - +Vdc Supply voltage (+5Vdc to +16Vdc)
2 - DATA1 / CLK Wiegand or Clock/Data output
3 - DATA0 / DAT Wiegand or Clock/Data output
4 - GREEN Green LED control input
5 - RED Red LED control input
6 - BUZZER Buzzer control input
7 - TMPR / CP Tamper or Card Present output
8 - 0V Supply voltage ground
9 - TTL TX TTL transmit line
10 - TTL RX TTL receive line
Mechanical
Dimensions: 96mm x 52mm x 21mm (3.8 x 2.1 x 0.8 inches)
Housing: Moulded polycarbonate/ABS
Mounting: Wall surface
Environmental
Operating Temperature: -20°C to +60°C
Humidity: 0 - 100% RHNC
Ingress Protection: IP65
Electrical
Voltage: +5Vdc to +16Vdc
Current: 250mA typical
Data Voltage: Rest >4Vdc / Active <1Vdc
Data Output: Wiegand, Clock & Data, Custom Outputs
Indication: 1 RGB LED
Sounder: Integral speaker
96mm
3.8 inches
21mm
0.8 inch
52mm
2.1 inches
65mm
2.7 inches
32.5mm
1.3 inches
49mm
1.9 inches