Motorsports Cam M1 Quick Start Guide & Warranty www.thinkware.
Contents English 2 Français 18 Deutsch 36 Español 54 Italiano 72 Русский 90 日本語 简体中文 108 125 繁體中文 141 ภาษาไทย 157
Quick Start Guide & Warranty English Before using the product This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Read the following safety information to properly use the product. Safety symbols in this guide "Warning" - Indicates a potential hazard, which, if not avoided, may result in injury or death. "Caution" - Indicates a potential hazard, which, if not avoided, may result in minor injury or property damage. "Note" - Provides useful information to help users better utilize the product's features. During use of the product • Do not operate the product while driving a motorcycle.
Ensure that all the items are included in the product box when you open it. The standard items may change without prior notice. Main unit/integrated remote control (power cable included) Front camera Rear camera Mount Quick start guide microSD memory card Check the thickness of each cable to identify the front camera and the rear camera. The front camera cable is thicker than the rear camera cable.
Part names The product design may change without prior notice. Main unit Power cable Connect each wire (ACC, GND) to your motorcycle’s battery. Rear camera port Used to connect the product to the rear camera. (thin cable) Remote control Used to control the product. Front camera port Used to connect the product to the front camera. (thick cable) Memory card slot Insert a memory card to save recordings. Check the thickness of each cable to identify the front camera and the rear camera.
English Front/Rear camera Horizontal reference point Attach the product to the mount based on the marked point ( ). Front/Rear camera lens Records the front view. Camera cable Connect to the main unit’s camera port. Check the thickness of each cable to identify the front camera and the rear camera. The front camera cable is thicker than the rear camera cable. Installing the product The following illustration shows the proper installation locations on a motorcycle for each part of the product.
Attaching the main unit Attach the main unit to the inner part of the motorcycle, such as the inside of the seat. Firmly attach the product to the motorcycle. The product may become detached while driving if it is not firmly attached. Attaching the remote control Remove the protective film from the remote control, and attach it where it can be used easily without obstructing vehicle operation.
Attach the camera to the mount as indicated by the horizontal reference point, and firmly tighten the screws using a wrench. Tighten the bolts firmly to fix the front/rear camera to the mount. The camera may become detached from the mount while driving if the screws are not firmly tightened. To adjust the angle of the front/rear camera, appropriately tighten the screws attached to the mount.
Connecting the power cable Connect the power cable (ACC, GND) to the motorcycle key-on wiring. • The power cable must be professionally installed on the motorcycle by a trained mechanic. It may result in fire or electric shock if the product is installed incorrectly. • Ensure the wiring is completed correctly after connecting the power cable (ACC, GND) to the motorcycle key-on wiring. Failure to do so may damage the product or the motorcycle.
You can record a scene you want to capture while driving and store it as a separate file. Operation description Status LED When you press the manual recording ( REC ) button, a video will be recorded for 1 minute, from 10 seconds before to 50 seconds after pressing the button, and stored in the "manual_rec" folder. Blue (flickers) Checking the status LED Refer to the following table to check the status LED.
Using the THINKWARE CLOUD application You can view and manage recorded videos and configure various product features with your smartphone. Download the “THINKWARE CLOUD” application via the Google Play Store or Apple App Store and install it on your smartphone. THINKWARE CLOUD application does not support cloud service for this model.
1 Turn on the motorcycle or start the engine to turn on the product, and launch the THINKWARE CLOUD application on your smartphone. 2 Tap Dash cam connection is required. at the bottom of the screen. 3 Press the Wi-Fi( ) button on the remote control and tap connect on the Hotspot connection area at the bottom of the screen and tap Configure New Connection. 4 Tap Next on the Wi-Fi activating screen. 5 Tap Wi-Fi Settings on the Wi-Fi Connecting screen. The Wi-Fi Settings screen will appear.
THINKWARE CLOUD application screen Move to the Live view screen. View and play recorded videos. View or configure the dash cam (product) settings. View the product information. View the connected Wi-Fi network or add a new network. Displays the connection status of the product. View main menu. View menus for setting up your account, downloading the latest firmware, or safety camera data.
Connect the product and the THINKWARE CLOUD application and tap Dash Cam Settings on the application. 2 You can set the product features based on your needs and preferences.
Specifications Items Specification Model name M1 Front camera Dimensions / Weight 75.3 x 36.6 x 36.6 mm / 167.2 g Rear camera Dimensions / Weight 75.3 x 36.6 x 36.6 mm / 102.6 g Main unit Dimensions / Weight 118 x 73 x 26 mm / 254.3 g (Including remote control (50.1 x 40 x 16.1 mm)) Memory microSD memory card (Class10) Recording mode Continuous recording/Manual recording/ Video stabilization/Super night vision Camera sensor 2.1M Pixels, 1/2.
reliability. Replacement products or parts will have functionality at least equal to that of the product or part being replaced. Replacement products and parts are warranted to be free from defects in materials or workmanship for 90 days, or for the remainder of the warranty period for the THINKWARE Product which they are replacing or in which they are installed, whichever is longer.
