Installing our Flair Alr Quality Monitor Contents: » Think lite Flair Monitor e Magnetic Monitor Cover » Sensor Capsules (x2) » Wall Mount # Mounting Screws + Outlet Adapters ® Ethernet Cable = Monitor Power Cord » Wall Plug » Instruction Guide Where should it go and how to use? We recommend mounting your monitor on your wall anywhere from 3-7 feet above the floor, This is the optimal data zone for monitoring airborne pathogens and where it is most effective to have the monitor gauge data.
Usage Scenarios Cur Thirteenth Air Quality experts can help you determine the most effective installation locations based on your floor plan. The best placement for your Flair Air Quality Monitor is In a central location where it can get the mast accurate air samples of the room.
Insert the sensor modules into the base of the monitor. They can be inserted into either side, left or right. Push gently until you hear an audible click and each sensor is fully seated.
STEP 3. Use a level to make sure vou are mounting the back shell straight on the wall, Use a drill to make the holes and the two longer [A screws provided to securely install the shell on the wall, STEP 4, Fit the Flair monitor into the back shell on the wall.
STEP 6. 1a) Lug the cable into a wall outlet and then into either the side of the monitor or the back of the device, and then turn on the power | USB/C Port | | > ital device. J | | Use Port side of Levies STEP 6.