THINKCAR Version: V1.00.001 Statement: the THINKCAR has full intellectual property rights to the software used in this product. For any act of reverse or cracking the software, the Company will stop the product and reserve the right to pursue the legal liability.
THINKTOOL X10 www.thinkcar.com Copyright Information Without the written consent of THINKCAR TECH CO., LTD (hereinafter referred to as "THINKCAR"), no company or individual may copy or backup this manual in any form (electronic, mechanical, photocopying, recording or other forms). This manual is specially designed for the use of THINKCAR products. The company will not be responsible for any consequences caused by using it to guide the operation of other equipment.
www.thinkcar.com THINKTOOL X10 Adapter information Do not wet the equipment and adapter. Do not soak the equipment into water or place it in position where it may absorb water or other liquids. The charging device may be hot in normal use. Ensure good ventilation around the charging device. Unplug the charging device if any of the following occurs: • The charging device is exposed to rain, liquid, or excessive humidity. • The charging device shows signs of physical damage.
THINKTOOL X10 www.thinkcar.com Content 1. Overview............................................................................................................................................... 1 1.1 Instruction ............................................................................................................................................ 1 1.2 Recognize diagnosis host.................................................................................................................... 1 1.
www.thinkcar.com THINKTOOL X10 5.24 Seats Calibration ............................................................................................................................. 22 5.25 Coolant Bleed .................................................................................................................................. 22 5.26 Tyre Reset ....................................................................................................................................... 22 5.
THINKTOOL X10 www.thinkcar.com 1. Overview 1.1 Instruction The THINKTOOL X10 video remote diagnosis equipment (hereinafter referred to as THINKTOOL X10) has the strongest dual diagnosis mode, which can not only realize the local diagnosis function, but also complete the remote vehicle diagnosis through real-time communication of equipment, so that the diagnosis is not bound by space. THINKTOOL X10 supports voice and video communication, and provides massive technical maintenance expert support anytime.
THINKTOOL X10 www.thinkcar.com 1.3 Performance parameter Operating system Android 10 Camera Rear 13 megapixel camera Memory 4 GB Network connection Wi-Fi/Ethernet interface Memory capacity 128 GB Bluetooth Bluetooth 5.1 Battery 12600mAh/ 3.7V Work temperature Display screen 10 inches 0℃ ~ 50℃ Storage temperature -20℃ ~ 60℃ 1.4 Equipment operation The equipment interface shows return key " ", and gesture return is available. 1.
THINKTOOL X10 www.thinkcar.com 2. Rapid use introduction 2.1 First use The following setting should be made in first use. 2.1.1 Start Long press the power key to start the machine, and the screen displays as follows: 2.1.2 Language Setting Select the tool language from the languages displayed on the interface. 2.1.3 Connect Wi-Fi The system will automatically search all available Wi-Fi networks and you can choose the Wi-Fi needed.
www.thinkcar.com THINKTOOL X10 2.1.4 Choose Time Zone Choose the time zone of the current location, then the system will automatically cofigure the time according to the time zone you chose. 2.1.5 User agreement Read all the terms and conditions of the user agreement carefully and select "Agree to the Terms".
THINKTOOL X10 www.thinkcar.com 2.1.6 Account creation You need to enter your email address to register an account. If you already have other THINKCAR products and have registered, you can directly use the existing account to log in. 2.1.7 Diagnosis equipment activation Enter the serial number and activation code of the equipment to activate it. If no activation operation is performed, you can also tap [Personal] on the home screen to enter to select [Activation VCI] to carry out operation.
www.thinkcar.com THINKTOOL X10 2.3 Function menu After diagnosis host is started, the system automatically enters the home page: Function menu THINKTOOL X10 mainly comprises the following function options: • [Remote]: the user and the remote expert technician communicate the diagnosis requirements through this module, and the expert technician can use the third-party diagnostic equipment to provide professional remote diagnosis support after confirming the operation.
THINKTOOL X10 www.thinkcar.com 2.5 Battery use • If the battery has not been used for a long time or the battery is exhausted, it may not be able to start up the machine properly when charging. This is normal. Please charge the battery for a period of time before starting the machine. • Please use the attached charger for charging. The Company will not be responsible for any damage or loss caused by using other chargers other than those specified by the Company. • The battery can be recharged.
www.thinkcar.com THINKTOOL X10 3. Diagnosis When using the diagnosis function, the user can use VIN identification to quickly enter the system for diagnosis, or manually select the model and system for diagnosis. 3.1 VIN automatic identification Automatic VIN identification gives you faster access to the test vehicle system, and models and submodels do not need to be manually selected. Click [Diagnosis] on the home page of the equipment, and then click [VINSCAN] button to enter the function. A.
THINKTOOL X10 www.thinkcar.com ！ Note: diagnosis software for different models may have different diagnosis menus. 2) Select diagnosis mode: after the connection is successful, the screen will enter the diagnosis item selection interface. ！ Note: the interface has two display modes of system topology and system list, with the same functions. You can switch them according to your personal habits.
www.thinkcar.com THINKTOOL X10 Click [Smart Scan], the system starts to scan for fault codes in each system and displays specific scan results. Click [Report] to generate vehicle health report. B. System Scan: what systems the vehicle is equipped with are automatically scanned. C. Selection scanning: scan the manually selected vehicle electric control system. 3.3 Select diagnosis system 1) Select diagnosis system, click [Enter], the screen enters the function selection interface.
THINKTOOL X10 www.thinkcar.com model) is taken as example. ！ Note: in the system topology mode, click [EMC] first and then click [Enter]. 2) Click to diagnose the function. ！ Note: the diagnosis menu may vary from vehicle to vehicle. a) Version information Click [Version Information] to read the version information of the ECU of the current vehicle. b) Read fault code This function is used to read the fault codes existing in the ECU of the current vehicle.
www.thinkcar.com THINKTOOL X10 c) Clear fault code On the function selection page, click [Clear Fault Code], the system automatically deletes the existing fault code and pups up the dialog box "Clear Fault Code successfully".
THINKTOOL X10 www.thinkcar.com [Combine]: The graphs are presented in a combination mode for user to compare (*Note: different data stream options are marked in different colors). Screen button: 【Graph】: Parameters are displayed in the waveform mode. 【Graph】 13 【Combine】: Graphs are presented in a combination mode for users to compare. ！ Note: at most 4 data stream waveforms are displayed at the same time.
THINKTOOL X10 www.thinkcar.com In the value mode, click to display the current (single) data stream as a waveform. On the waveform display page, users can perform the following operations: 【Upper Limit/Lower Limit】: Click to set Max/Min. If the run value exceeds the set value, the system issues a warning. 【 】 " on the screen to define data stream options 【User Defined】: Click " to be checked. ！ Note: at most 4 data stream options are selected.
THINKTOOL X10 www.thinkcar.com Used to collect standard data streams, standard values stored can be imported into the [Standard Range]. Click [Collect] to start recording the sample data stream (Note: the system only records the data stream option with unit). After the recording is complete, click to terminate recording, then the system automatically jumps to the value modification page. 【Save Sample】 Click values in columns "Min" and "Max" after the data stream option to modify the value.
THINKTOOL X10 www.thinkcar.com Remote diagnosis is a service system integrating remote diagnosis platform and professional remote diagnosis equipment, including THINKTOOL X10 video remote diagnosis equipment (repairer), remote service platform, and ThinkLink remote diagnosis service box (server).
THINKTOOL X10 www.thinkcar.com DB30 diagnosis cable 3) Connect one end of the delivered network cable to the LAN/WLAN port of the THINKTOOL X10 and the other end to the network modem LAN jack. ！ Note: it suggests that the network is of 100 mbit broadband and above. Internet CAT-6 network cable 4) Turn on the Ethernet switch using the THINKTOOL X10 drop-down menu. 5) Turn on the ignition switch.
www.thinkcar.com THINKTOOL X10 9) After the maintenance service is finished, the maintenance terminal can view the report and confirm the order through the dialog window. 10) After the remote diagnosis is completed, remove the network cable and turn off the Ethernet switch , so as to terminate remote diagnosis. ！ Note: in "Message" on the home page, you can view the records of the servers you contacted. 5.
THINKTOOL X10 www.thinkcar.com b) After the ECU is powered off, the memory of the ECU memory is lost, and throttle matching is required. c) After replacing the throttle assembly, throttle matching is needed. d) After replacement or disassembly of the air inlet, the coordination of ECU and throttle body to control the idle speed is affected, so it is necessary to carry out throttle matching.
www.thinkcar.com THINKTOOL X10 5.7 DPF Reg. The DPF regeneration function is mainly to regularly remove particles in the trap by using a combustion oxidation method (e.g. high temperature heating combustion, and combustion with fuel additives or catalysts to reduce the ignition point of particles), so that the trap performance is always kept at the best stability. Situations where DPF regeneration matching is required: a) The exhaust back pressure sensor is replaced.
THINKTOOL X10 www.thinkcar.com control module in the air suspension system are replaced or the levelness of the vehicle is incorrect, it is necessary to perform this function to adjust the body height sensor for level calibration. 5.13 AFS Reset The self-adaptive headlight system can be initialized with this function.
www.thinkcar.com THINKTOOL X10 5.21 Stop/Start Reset By swiping the trip computer hiding, the vehicle can enable or disable the automatic start-stop function (provided that the vehicle has the hiding function, supported by the hardware). 5.22 NOx Sensor Reset It is a sensor used to detect nitrogen oxide (NOx) content in engine exhaust. Re-initialization of NOX fault and replacement of NOX catalytic converter require resetting the catalytic converter learning value stored in the engine ECU. 5.
THINKTOOL X10 www.thinkcar.com 5.33 Motor Angle Calibration There is a deviation between the rotor position detected by the angle position sensor of the motor and the actual rotor magnetic field position, so it is necessary to calibrate the motor angle. 5.34 High Voltate Battery Diagnostics For diagnosis and state information detection on high-voltage accumulator. 5.
www.thinkcar.com THINKTOOL X10 c) Learning: with this function, the sensor ID can be written into the vehicle ECU for sensor identification. d) Diagnosis: with this function, the tire pressure system fault code can be read, the tire pressure system fault code can be cleared, the sensor ID number stored in the tire pressure system can be read, and the tire pressure function can be learned. (The diagnostic page may vary from vehicle to vehicle.) 6.
THINKTOOL X10 www.thinkcar.com [Diagnosis feedback]: to display list of all detected models. [Diagnosis feedback history]: click to check handling progress of all submitted diagnosis feedback. [Offline list]: click to view the diagnosis feedback of upload failure due to network problems. Once the network is restored, the system automatically uploads the data to the server. Under the [Diagnosis Feedback] tab, click the diagnosis record of the corresponding model or special function to enter.
www.thinkcar.com THINKTOOL X10 6.4 ThinkFile Used to record and establish a diagnosis vehicle file. It is created based on the vehicle VIN and inspection time, including diagnosis reports, data stream records, pictures and all VIN-related data. 6.
THINKTOOL X10 www.thinkcar.com 7. ThinkStore ThinkStore is launched by THINKCAR, including software and hardware products. In the store, you can buy required software, each software has a detailed functional introduction. All THINKCAR hardware is also available for purchase online. 8. Upgrade To ensure that you enjoy better functions and upgrade services, you are advised to upgrade the software from time to time. When a new software version is available, the system prompts you to upgrade it.
www.thinkcar.com THINKTOOL X10 9.1 VCI If multiple equipment serial numbers are registered with the same THINKTOOL X10 account, use this item to select the corresponding equipment serial numbers. 9.2 Activate VCI It is used to activate the equipment and check activation help information. Enter the connector serial number and verification code, then click "Activate ". Once activated, the equipment serial number will be displayed in my equipment list. 9.
THINKTOOL X10 www.thinkcar.com 9.11 Business management To add the owner information of the merchant, which will be displayed to the owner in the diagnosis report. 9.12 Customer management To manage client information of all diagnosed vehicles, displayed in sequence here. 9.13 Setting To perform system settings, such as diagnostic unit setting, language and time zone settings, cache clearing, and mode switch. 10.
THINKTOOL X10 www.thinkcar.com Q: Why cannot the product login? Possible cause Solution The equipment is not connected with the network Make sure that the equipment is connected with the network normally. The user name or password is incorrect Server problem Make sure the user name and password input is correct; Contact the THINKCAR customer service or regional sales to find back the user name and password. The server is maintained, please try later.
THINKTOOL X10 www.thinkcar.com Q: Non-standard OBDII vehicle diagnosis interface connection? A: There is non-standard conversion connector in the equipment packing case. Connect it according to the method described in the manual. Q: Why cannot diagnosis equipment communicate with vehicle ECU? A: Ensure that the diagnosis cable is connected correctly. Make sure the ignition key is turned on.
www.thinkcar.com THINKTOOL X10 IC Requirement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference,including interference that may cause undesired operation of the device.
THINKTOOL X10 www.thinkcar.com FCC Requirement Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THINKTOOL X10 www.thinkcar.com Warranty Terms ▪ This warranty applies only to users and distributors who purchase THINKCAR products through normal procedures. ▪ Within one year from the date of delivery, THINKCAR warrants its electronic products for damages caused by defects in materials or workmanship. ▪ Damages to the equipment or components because of abuse, unauthorized modification, use for nondesigned purposes, operation in a manner not specified in the instructions, etc.
